Providing and Laying of EPDM Track, Decorative Lights, Music System, Open Gym Equipments, Repair and Other Civil Works in Shree Baake Bihari Society Park in Sector 17 Ward No. 1 MC Panipat (Rural) only for L and C Society

RMI10 Air Swing Function Size 1177*942*1446 Pre galvanized MS, Thickness 3mm

RMI-13 Stair Stepper with Glider Functions 1036*736*1343mm Pre galvanized MS thickenss 3mm

RMI 3 Cross Walker Functions 1612*605*1545mm Pre Galv MS Thickness 3mm

Seated Chest Press :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all . Including Contractor Profit, overhead charges, GST and all others charges.

Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be. Including Contractor Profit, overhead charges, GST and all others charges.

Supply, testing and commissioning of Post Top Coloumn light made of mild steel and have ingress protection for optical compartment. Column of height 4mtr above ground level with two spot light of 10W for top illumination and column with predesigned Laser cut to illuminate the surroundings with noticeable mode. The column light pole section of 220mmx220mm x 4mm thickness up to 4mtr long. The base plate dimension are 209x209x16mm. All pole section Shall be welded by certified welders using high and MIG welding process. The Service door shall be provided at bottom part of the pole to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the pole is design with elongated foundation holes for fine alignment of the pole during installation. Nano Ceramic surface conversion, resistant to corrosive environment. Fitting is made of mild steel with fine laser cut design and signage closed by diffuser tailored with lighting to suit your specific needs as per detail drawing. Colour tolerance ,3 SCDM to avoid colour deviation. Nano Ceramic surface conversion, resistant to corrosive environment. All exterior parts are made of stainless steel. Diffused symmetric light without glare. Light output of source is more than 110lm/ watt, CRI)70, Surge protection 4k, operating voltage 140-270V, Branded LEDs of Osram/ Cree/Seoul and Fulham/Meanwell/Inventronics/Osramor equivalent constant voltage/current driver with THD ( 10% power factor)0.9. The CCT of led will be 3000k and fixture color will be Black as required by the project. Proper thermal management for longer life of fixture. Led burning of 50,000 hours. Fitting is complete in all aspects with all accessories except foundation bolts.with 5 year DLP Approved Make : Keselec/VAK/Jaquar Note: The pole would be inspected by the inspection committee of the MC Panipat and only after that technical inspection Pole will be finallised for eraction at site. Note: For better understanding of the design and specification photo has been attached for design and specification of the poles along with the tender docs.

Providing and laying 15mm thick synthetic jogging track EPDM (9mm SBR Crumb Rubber as track bottom Cushion Layer 6mm EPDM Colour Granules top layer) of approved make COLORSPACEF/COLORPLAY/BSG/NOVAL with test reports of certified NABL lab, origin Of EPDM USA and EUROPE and equivalent. EPDM Granules shall have following minimum properties 00 Polymer content )22%, (u) Hardness of 55-65 Shore A [per ASTM D2240): (ii) Tensile Strength of )5 MPa (per ASTM D412): (iv) Elongation )500% (as per ASTM D412): (v) Density of 1.6 kg/cum (per ASTM D792). (vi) High UV rating of 3-5 on grayscale, (vi) VOC less than 3.0.0ww/1 [viii] Combustibility less than40 mm /m: (ix) Anti- Microbial and Anti-Fungal Tested material, and shall be laid in three layers.[1] First step shall be the application of single component Polyurethane based primer coating Layer, PU binder shall have a specific gravity of 1.05 the appearance of clear pale yellow and viscosity of 350-2900 cps and shall be from the original manufacturer from the list of approved makes 2. The second layer shall be an impact attenuating cushion layer of 9mm thick black crumb rubber/SBR adhered with a polyurethane binder and PU binder shall have a specific gravity of 1.05: the appearance of clear pale yellow and viscosity of 350- 2900 cps and shall be from the original manufacturer from the list of approved makes of to form a resilient porous layer. Crumb rubber /SBR shall be mixed with a minimum of 14% -16% of single- component PU base binder so as to ensure that PU binder provides 100% coating of the SBR/crumb rubber particles. The third step shall be laying a 6mm 18% binder of single EPDM GRANULES top layer with at minimumcomponent polyurethane and shall provide 100% coating of the EPDM granules particles Design on the base top layer by a specialized team of installers according to the specification of approved material and shade. The detailed technical specifications of EPDM flooring testing. material properties, application procedure, etc. are attached herewith for compliance. The documentary evidence has to be produced. for the procurement of material for manufacturer`s test certificate. An undertaking is to be furnished by the agency that surface system is tested EN 1177 For shock absorption report of SPORTS LAB approved by IAAF WORLD Athletics` company has not been World blacklisted by IAAF/Sports Authority of India/ Athletics `IAAF the means earlier `international Association of Athletics Federations or World Athletics now. The work shall be carried out by the manufacturer`s approved applicator and the prospective bidder should produce a letter from the approved strictly to manufacturer prior to submission of bid and satisfaction of the technical specifications and the engineer-in-charge.

Mural painting/Graffiti on walls of parks/road sides, electric poles in different colours and epoxy paint with weather shield by the skilled painters/ fine art artists and with wall Putti/White Wash as a base before the start of work and in complete satisfaction of the engineer-in-charge( Including all heights)

SINGLE SHOULDER PRESS Main Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. Handle: is made of 088 *3 mm thick Pipe and 025 mm round M.S bright bar in bending design. All remaining frame is made by 088 *3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome Ope A. plated mild stee!048 D!A pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall Goploy thickness for free weight noiseless operations. Bearing: Lubricated high grade6305 `2RS`steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes: 075mm OD seamless pipe. Weight plate mounting pipe is of 048 mm MS pipe. Seat Frame: made up of hard chrome plated mild steel 48 DIA round pipe. Hardware All hardware`s uses button heads bolts and nuts made up of high tensile steel. Hand grips: Hand grips is used on handles wherever necessary made up of high-quality rubber and handle ends are covered with aluminum/pp/nylon caps with grub screw for long endurance. Closing caps: are of PP/NYLON/HDPE materia!. Laser cutting: profiles of 6mm and 4mm thick M.S sheet are used for connecting subordinates with each other. Rubber: Safety base pads: Anti-skid safety base pads made up superior rubber to prevent slippery and damage to floor. Heavy duty 20mm thick rubber pads are placed for resting handles for noise less operations. Powders Coating: All components are chemically treated to seal exterior and interior surfaces against corrosion. The components are electro statically powder coated at minimum 80-100-micron thickness to make it resistant to scratch, corrosion and humidity in dual color combination.