Provn of Diversion of pipe line at Lohara Marg Accn and Spl repairs to PPL (Vintage 25 Yrs) under GE (West) Mathura

Amount

Taking down cast iron water mains (including fittings) with spigot and socketed ends and lead joint including burning out lead joint and recovering lead complete size 150mm dia complete all as specified and directed.

Taking down cast iron water mains (including fittings) with spigot and socketed ends and lead joint including burning out lead joint and recovering lead complete of size 100mm dia complete all as specified and directed.

Taking up or down steel water tubing and connection of the folowing sizes :- (i) 20mm dia

(ii) 25mm dia

(iii) 40mm dia

(iv) 50mm dia

Supply, laying, jointing & testing mild steel galvanised water tubing, medium grade with all GI fittings and laid in trenches, on wall, floors, ceiling etc complete all as specified and directed of the folowing sizes :- (i) 20mm dia

(ii) 25mm dia

(iii) 40mm dia

(iv) 50mm dia

S&F in repair gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 20mm bore complete all as specified and directed.Make :Leader/Kirloskar/L&T/Zoloto

S&F in repair gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 25mm bore complete all as specified and directed.Make :Leader/Kirloskar/L&T/Zoloto

S&F in repair gunmetal glove or gate valve with iron wheel head screwed both ends for iron pipe of size 50mm bore complete all as specified and directed.Make :Leader/Kirloskar/L&T/Zoloto

M&L for ductile iron fittings K-12 IS-9523 marked viz bends, tapers, reducers, tee pieces (single or double branch) any type , angle / radius and straight connecting pieces, flanged/ socket and spigot ends, up to 150mm bore, (suitable for pipe considered under this schedule) complete all as specified and directed.

M&L for flat iron clamp made up of 32x5mm width flate iron MS sheet in two half including one half having a hole and welded one GI socket of 20mm dia on top of hole suitable for up to and including 80mm dia pipe including nuts and bolts, rubber packing complete all as specified and directed.

Taking down sluice valves of various capacities up to 150mm dia complete all as specified and directed.

S&F Cast iron sluice valve flanged type, class PN 1.0 of size 150mm cast iron body with stainless steel spindle, non rising complete type, and cast iron wheel head, both ends flanged, IS-14846 marked, complete with neoprence rubber gasket joint and nuts, bolts (high tonsile), washers etc, complete all as specified and as directed.

S&F Cast iron sluice valve flanged type, class PN 1.0 of size 100mm cast iron body with stainless steel spindle, non rising complete type, and cast iron wheel head, both ends flanged, IS-14846 marked, complete with neoprence rubber gasket joint and nuts, bolts (high tonsile), washers etc, complete all as specified and as directed.

M&L for construction of bricks massonry valve pit chamber of size 1050X1050X1050mm (internal diamentioin)with sub class 'B' bricks old size built in CM (1:4), PCC (1:2:4) type B-1 as in foundation concrete, bed/ floors, coping and 10 mm thick rendering in CM (1:4) on internal and exposed external surfaces, external plaster shall be upto 15 cm below GL with and including 40 X 40 X 6 mm angle iron frame and 3.15 mm thick MS sheet cover with suitable hinging and locking arrangements and one No. 50 mm size 4 lever MS lock with key in duplicate (Make 'Navtal') including excavation and earthwork in soft/loose soil, painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc complete in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated materials not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L for passing of water supply pipe line through civil road/Railway/National Highway by adopting method of horizontal Directional Drilling (HDD) i.e trenchless technology, miroc tunneling for 300mm dia casing pipe complete all as specified and directed.

M&L for 250mm dia of thickness 4.8mm MS casing pipe including pushing through drilled way under ser Item No 36.00(here-in-before) with all tools & plants as per IS 3589 (1981) complete all as specified and directed.

Taking down cast iron water mains (including fittings) with spigot and socketed ends and lead joint including burning out lead joint and recovering lead complete size 80mm dia complete all as specified and directed.

S&F gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 20mm bore complete all as specified and directed.Make :Leader/Kirloskar/L&T/Zoloto

S&F gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 25mm bore complete all as specified and directed.Make :Leader/Kirloskar/L&T/Zoloto

S&F gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 50mm bore complete all as specified and directed.Make :Leader/Kirloskar/L&T/Zoloto

Deven Associates

RAJ CONSTRUCTIONS

M/S CHAUDHARY CONSTRUCTION