Hyderabad Division:1) (i) CH/LGD: Provision of Lift at Blood Bank and PS (ii) Re- wiring of staff qtrs (iii) Improvements to Headquarters Colony Street Lighting. 2) Action Plan Target Works and setting up of lab for testing, repairing of electrical items over the Hyderabad division.

A1-(i) Electrical arrangements to lift at Blood Bank CH/LGD (Note: Unit

Supply & laying of PVC conduit pipe of 25 mm dia 2 mm thick in concealed/surface as per the directions of Engineer at site

Supply & fixing of PVC conduit moulded bend pipe 32/25 mm dia 2 mm thick in concealed

Supply & fixing of PVC Junction box of suitable way for 32/25 mm dia 2 mm thick PVC conduit pipe in concealed

Supply, laying and fixing of water proof PVC casing & caping of size 20/25 mm of 2 mtrs length each including all connected accessories etc.

Supply and laying of flexible 25mm PVC pipe

Cutting and chipping the wall for laying the PVC conduit pipe and plastering after laying the PVC conduit pipe with cement and sand mortar mixed with 1:8 ratio, but without laying PVC conduit pipe.

Supply, laying, connecting & commissioning of single core FRLS multi strand 1.5 sq. mm Cu. Conductor

Supply, laying, connecting & commissioning of single core FRLS multi strand 2.5 sq. mm Cu. Conductor

Supply, laying, connecting & commissioning of single core FRLS multi strand 4 sq. mm Cu. Conductor

Supply, laying, connecting & commissioning of single core FRLS multi strand 6 sq. mm Cu. Conductor

Supply, laying, connecting & commissioning of single core FRLS multi strand 10 sq. mm Cu. Conductor

Supply, laying, connecting and commissioning of 3 core 1.5 mm sq.mm multi stranded FRLS cu. Conductor as per the directions of Engineer at site

Supply, laying, connecting and commissioning of 3 core 2.5 mm sq.mm multi stranded FRLS cu. Conductor as per the directions of Engineer at site

Supply and erection of ceiling rose.

Supply & erection of 6/10A 1-way switch

Supply & erection of 16/20A one way switch

Supply & erection of 6/10A socket pin with safety shutter

Supply & fixing of 16/20/10A socket heavy duty with safety shutter

Supply & erection of 4 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 4 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 6 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 6 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 12 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 12 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 18 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 18 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply, fixing, connecting and commissioning of Bulk head fitting

Supply, fixing, connecting and commissioning of 20 Watts 1200mm LED tube light aluminium fitting (warm white/cool white) with lamp including wiring connections etc. as per enclosed specification as per the directions of Engineer at site

Supply, fixing, testing and commissioning of (DP MCB - Incoming & SP/MCB - 29 Outgoing) wall mounted of one row 12 module circuit breaker box made out of thermoplastic, (with metric knockouts for cable entry) with N terminal, size (202 x 238 x 111)mm complete. The LT distribution board shall be comprising with the following MCBs fixed in it conforming to IS:8828:1996, ISS & IE rules and site requirement. DP MCB 40-63 Amps. 'C' series = 01 No. (Incoming) SP MCB 6-32 Amps. 'B' series = 07 Nos. (Outgoing)

Supply, fixing, testing and commissioning of 24 module DB out door type of make 30 Havells, Siemens, L&T, Schneider, Legrand or equivalent with following items of matching make to be fixed in distribution board, confirming to IS:8828:1996 or latest, IE rules and site requirement. 4P MCB 63 Amps. 10 KA 'C' series = 01 No. (Incoming) SP MCB 6-32 Amps. 10 KA 'C' series = 18 Nos. (Outgoing)

Design, supply, installation, testing and commissioning of cubicle type 14SWG LT panel (Outdoor type) with 200 amps sectionalized electrolytic copper bus bar (Copper bus bar should be uniform size RYBN). LT switchgear confirming to IS-8623 or latest. Advanced Multi function 31 meters with CTs of suitable capacity with R.S.485 port for incoming supply with CTs of suitable and RYB LED indication lamps with all other connected accessories etc., as directed by Engineer at site. (1) 2 x 100/125 A 4pole 35/36KA microprocessor based MCCB including suitable spreader links (I/C), 1x100A change over switch Out goings: 6x40 Amps TPN MCB, 2x32A DP 'C' curve 10KA MCB, 6x16A SP MCB. Note: 1) MCCBs: ICs=100% ICu 2) MCCBs should be Microprocessor based only

Supply of 4core 70 mm² LT XLPE aluminium UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of 4 core 70 sq.mm multi strand LT XLPE cable as per directions of the engineer at site.

Supply of 8 SWG G.I. Wire and laying along with LTUG cable

Excavation of cable trench in all types of soils for LT cable as per the directions of engineer at site

Supply & erection of HDPE pipe of 50 mm dia, PN-6, PE-100 of material grade as per IS 4984-2016 or latest as per the directions of Engineer at site

Cutting of asphalted road/ concrete/ cement and excavation of cable trench 30cm 37 widex90cm, deep road etc. for laying of LTUG cable after laying of cable the trench should be brought to its original position by providing tar/concrete/cement as per the site conditions and as per directions of Rly. Engineer.

Supply and erection of earth electrode (as per RDSO Drawing No.ETI/OHE/P/7021 & RDSO Spec no. TI0LKO(PSI)/ 38/ 2020 Dt:25.08.2021 or latest) Above/

A2-(ii) Re-wiring of Quarters (Type-I/II- 120 units, Type-III- 35 units,

Supply & laying of 25 mm dia 2 mm thick PVC conduit pipe in concealed or as per the directions of engineer at site

Supply & laying of 32 mm dia 2 mm thick PVC conduit pipe in concealed or as per the directions of engineer at site

Supply & fixing of PVC conduit moulded bend pipe 32/25 mm dia 2 mm thick in concealed

Supply & fixing of PVC Junction box of suitable way for 32/25 mm dia 2 mm thick PVC conduit pipe in concealed

Supply and laying of flexible 25mm PVC pipe

Supply & erection of 2 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 2 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 3 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 3 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 4 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 4 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 6 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 6 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 8 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 8 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 12 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 12 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 18 way module size GI sheet metal/PVC box in concealed/surface similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 18 module size modular plates with unbreakable frame similar to GM make or equivalent as per the directions of Engineer at site

Supply & erection of 6/10A 1-way switch

Supply & erection of 6/10A 2-way switch as per the directions of Engineer at site

Supply & erection of 6/10A socket pin with safety shutter

Supply & erection of 16/20A one way switch

Supply & fixing of 16/20/10A socket heavy duty with safety shutter

Supply and erection of ceiling rose.

Supply, laying, connecting & commissioning of single core multi strand 1.5 sq. mm FRLS Cu. Conductor

Supply, laying, connecting & commissioning of single core multi strand 2.5 sq. mm FRLS Cu. Conductor

Supply, laying, connecting & commissioning of single core multi strand 4 sq. mm FRLS Cu. Conductor

Supply, laying, connecting & commissioning of single core multi strand 6 sq. mm FRLS Cu. Conductor

Supply, laying, connecting & commissioning of single core multi strand 10 sq. mm FRLS Cu. Conductor

Supply, laying, connecting and commissioning of 3 core 1.5 mm sq.mm multi stranded FRLS cu. Conductor as per the directions of Engineer at site

Supply & fixing of Ding dong call bell

Supply & erection of modular type bell push switch as per the directions of Engineer at site

Supply, fixing, connecting and commissioning of 20 Watts 1200mm LED tube light fitting (Aluminium Body) with lamp including wiring connections etc. as per enclosed specification

Supply and fixing of 10W LED tube light (Cool Day/Warm Light) suitable to operate on 230V, 50Hz AC supply should be similar to cat no.D531065 of Wipro make be as per detailed specification

Supply and fixing of 9W LED Bulb as per the directions of engineer at site.

Supply & fixing of 1200 mm sweep energy saving BLDC copper wounded ceiling fan with remote control, 300mm length of down rod, input power not more than 28W, minimum 1.1mm aluminium blade material, double ball bearing, 2 canopy, to be operated in AC single phase supply.

Supply and fixing of 10"/ 250mm sweep noise less exhaust fan complete with all connected accessories.

Supply, fixing, connecting and commissioning of 4 way single door SPN DB with Acrylic window (IP 42) power coated sheet steel enclosure fitted with bus bar DIN & Neutral link 1x25A DP ELCB 6 KA with 100mA sensitivity (I/C), 2x20A DPMCB 10KA, 2x10A SPMCB 10KA (O/G)

Supply, erection, commissioning of 63A 4 Pole ELCB 6 KA with 100mA sensitivity

Supply and fixing of 32 amp 30mA DP RCCB as per the direction of the engineer at site.

Supply and fixing of Lamp Holder for LED Bulb as per the directions of engineer at site.

Supply of 4core 16 mm² LT XLPE aluminium UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of 4 core 16 sq.mm multi strand LT XLPE cable as per directions of the engineer at site.

Supply of 4core 25 mm² LT XLPE aluminium UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of 4 core 25 sq.mm multi strand LT XLPE cable as per directions of the engineer at site.

Supply and fixing of G.I. wire earth continuity of 8 SWG G.I. wire

Supply & erection of HDPE pipe of 50 mm dia, PN-6, PE-100 of material grade as per IS 4984-2016 or latest as per the directions of Engineer at site

Excavation of cable trench 30 cm widex90cm deep in all types of soils for LTUG cable as per direction of engineer at site

Cutting of asphalted road/ concrete/ cement/ under the track etc., and excavation of 50 cable trench 30 cm widex90cm deep road etc., for laying of LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly. Engineer.

Cutting and chipping the wall for laying the PVC conduit pipe and plastering after laying the PVC conduit pipe with cement and sand mortar mixed with 1:8 ratio, but without laying PVC conduit pipe.

Dismantling of wiring, fittings and other electrical assets in the Type I/II quarter and handing over to the concerned section incharge at his Store as per his instructions

Dismantling of wiring, fittings and other electrical assets in the Type III quarter and handing over to the concerned section incharge at his Store as per his instructions

Dismantling of wiring, fittings and other electrical assets in the Type IV quarter and handing over to the concerned section incharge at his Store as per his instructions

Dismantling of wiring, fittings and other electrical assets in the Type V quarter and handing over to the concerned section incharge at his Store as per his instructions

Supply, fixing, connecting & commissioning of GI strip of size 25x3 mm as per the directions of the engineer at site.

Supply and erection of earth electrode (as per RDSO Drawing No. ETI/OHE/P/7021 & RDSO Spec no. TI0LKO(PSI)/ 38/ 2020 Dt:25.08.2021 or latest)

Supply, design, fabrication and installation of meter box cubicle type 14SWG panel suitable to accommodate 12 Nos. of single phase meters along with connectors with 10sqmm copper wire for termination including glass and all connected accessories as per the direction of engineer

Supply, design, fabrication and installation of meter box cubicle type 14SWG panel 59 suitable to accommodate 6 Nos. of single phase meters along with connectors with 10 sqmm copper wire for termination including glass and all connected accessories as per the direction of engineer at site

Supply, design, fabrication and installation of meter box cubicle type 14SWG panel 60 suitable to accommodate 2 Nos. of single phase meters along with connectors with 10sqmm copper wire for termination including glass and all connected accessories as per the direction of engineer at site

Supply, installation, testing and commissioning of Single Phase Two Wire Tamper Proof, Static Watt-Hour Meter (Smart meter) of Accuracy class 1.0, 240 v, 50 Hz, Current range 5A- 60A, conforming to Indian Standards: IS-13779, IS-15884, IS-16444, IS-15959 with Dual Mode (Prepaid / Postpaid) Support, Advanced Protection Features, Inbuilt billing data calculation, Microprocessor and LED based Circuitry Meter with functionalities: Advanced metering mobile 61 application on iOS and Android, both which shows all electrical parameters, alerts and supports credit transfer to meter in addition to HES, Load limiting switch with load setting configuration from HES or through app via BLE, Support tamper event and power outage detection and reporting to HES and to app via BLE, Bi-directional communication NB-loT Cellular Communication for remote disconnection also, Tamper proof external enclosure box having IP54 or better, 10 year warranty, Support of at least 15 mins instantaneous data for voltage, current, pf, freq. energy and maximum demand load profile, meter should transfer the data for billing and tamper to HES using communication NBiOT or GPRS including Two Years Vending Charges & training charges etc.

Supply, installation, testing and commissioning of Three Phase Dual mode Three phase Two Wire Tamper Proof, Static Watt-Hour Meter (Smart meter) of Accuracy class 1.0, 240 v, 50 Hz, Current range 10A-100A, conforming to Indian Standards: IS-13779, IS-15884, IS-16444, IS 15959 with Dual Mode (Prepaid / Postpaid) Support, Advanced revenue Protection Features, Inbuilt billing data calculation, Microprocessor and LED based Circuitry Meter with functionalities: Advanced metering mobile application on iOS and Android both which shows all electrical parameters, alerts 62 and supports credit transfer to meter in addition to HES, Load limiting switch with load setting configuration from HES or through app via BLE, Support tamper event and power outage detection and reporting to HES and to app via BLE, with Bi-directional communication NB-loT Cellular Communication for remote disconnection also, Tamper proof external enclosure box having IP54 or better, 10 year warranty, Support of at least 15 mins instantaneous data for voltage, current, pf, freq. energy and maximum demand load profile, meter should transfer the data for billing and tamper to HES using communication NBiOT or GPRS and also support for meter mode switching through authenticated command remotely including Two Years Vending Charges & training charges etc. Above/

A3-(iii) Improvements to headquarters Colony street Lighting (Note: Unit

Design, fabrication, supply, erection, testing and commissioning of mini 12 Mtrs high mast system complete with all connected accessories. The mast shall be single section, hot dip galvanised, head frame, 2 point stainless steel wire rope 5 mm dia 7/19 construction, double drum 1 winch, galvanised lantern carriage arrangement suitable for 6 luminaries symmetrically with its control gear boxes, lightning and with all connected materials as per the detailed specification. The mast shall have an integral power tool installed inside the base compartment for its operation. This includes wiring with 5 core 2.5 sq.mm PVC insulated copper cable, except those mentioned as separate item.

Designing & casting M- 30 cement concrete foundation suitable for 12/16 m high mast considering the safe soil bearing capacity at site as per requirement at 3 meter depth including excavation, foundation nut, bolts, etc., an approved manner.

Supply & erection of fencing panels at high mast structures locations with size 2m height as per the directions of the engineer at site.

Supplying and erecting Outdoor Stand Mounted Feeder Pillar for high mast of same manufacturer with 32A TPN MCB incomer, single dial timer switch 25 A TP contactor for automatic 4 switching of luminaries, 2 no 9A contactors and raise/lower push button, and provision for termination of Incoming minimum 35 sq. mm and outgoing minimum 16 & 25 sq. mm cables complete erected in min. 14 gauge CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation in an approved manner.

Supply, fixing, connecting and commissioning of 200 watt LED based flood light luminary with cool white light, pressure die cast aluminium housing, IP 65 or better having system complete as per specification.

Supply & erection of 5m long hot dip galvanized octagonal pole with 130mm bottom A/F and 70mm top A/F, made up of 3mm thick HT Sheet & Bakelite sheet & suitable MCB including 6 suitable size of loop-in & loop-out connectors (for mounting inside the base compartment of pole with hinged door opening arrangements), with base plate of size 200x200x12mm, M16X 600 long 'J' type EN8 grade foundation bolts, with 1000mm Single arm bracket for fixing of LED light with all connected accessories, etc.

Supply & erection of 5m long hot dip galvanized octagonal pole with 130mm bottom A/F and 70mm top A/F, made up of 3mm thick HT Sheet & Bakelite sheet & suitable MCB including 7 suitable size of loop-in & loop-out connectors (for mounting inside the base compartment of pole with hinged door opening arrangements), with base plate of size 200x200x12mm, M16X 600 long 'J' type EN8 grade foundation bolts, with 1000mm Double arm bracket for fixing of LED light with all connected accessories, etc.

Supply & erection of 4 meter aesthetic Decorative Pole (LEAF MODEL) including the lighting fixtures of 60W as per the specification attached

Supply & erection of 5 meter aesthetic Decorative Pole (Y MODEL) of double arms including the lighting fixtures of 60W as per the specification attached

Excavation of pit for octagonal pole/poles of suitable size in all type of soils as per the direction of engineer at site

Provision of concrete foundation and constructing the plinth as per the directions of engineer at site.

Supply of 4core 10 mm² LT XLPE Al. UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of 4 core 10 sq.mm multi strand LT XLPE cable as per directions of the engineer at site.

Supply of 4core 16 mm² LT XLPE aluminium UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of 4 core 16 sq.mm multi strand LT XLPE cable as per directions of the engineer at site.

Supply of 4core 25 mm² LT XLPE aluminium UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of 4 core 25 sq.mm multi strand LT XLPE cable as per directions of the engineer at site.

Supply of 4core 70 mm² LT XLPE aluminium UG Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest.

Laying, connecting, testing and commissioning of 4 core 70 sq.mm multi strand LT XLPE cable as per directions of the engineer at site.

Supply and fixing of G.I. wire earth continuity of 8 SWG G.I. wire

Supply & erection of HDPE pipe of 110 mm dia, PN-6, PE-100 of material grade as as per IS 4984-2016 or latest per the directions of Engineer at site

Supply & erection of HDPE pipe of 50 mm dia, PN-6, PE-100 of material grade as per IS 4984-2016 or latest as per the directions of Engineer at site

Excavation of cable trench 30 cm widex90cm deep in all types of soils for LTUG cable as per direction of engineer at site

Cutting of asphalted road/ concrete/ cement/ under the track etc., and excavation of 24 cable trench 30 cm widex90cm deep road etc., for laying of LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly. Engineer.

Supply, installation and commissioning of Split Air conditioner with 5 BEE Star Rating inverter, Copper Coil, ISEER:5.0 or above with connected accessories, suitable outdoor stand etc.

Supply and fixing of extra copper pipe for Split AC (if required as per site condition)

Supply and fixing of drain pipe UPVC of 25mm dia including accessories, bend, elbows, tees, flanges, tappings, wall sleeves, hangers supports anchors, etc.

Supply and fixing of 4 corex2.5Sq.mm flexible FRLS copper cable (communication cabling) for Split/Cassette AC

Supply, fixing, connecting and commissioning of 60W LED street light (warm colour light) complete with necessary clamps and hardware etc. as per Railway specification

Supply, fixing, connecting and commissioning of 90/100 watt LED based street light (warm colour light) luminary with cool white light, pressure die cast aluminium housing, IP 65 or better having system complete as specification.

Supply, erection, testing and commissioning of 8W Bollard LED light of height 0.6mtrs for garden lights as per directions of engineer at site

Supply and erection of earth electrode (as per RDSO Drawing No.ETI/OHE/P/7021 & RDSO Spec no. TI0LKO(PSI)/ 38/ 2020 Dt:25.08.2021 or latest)

Supply & erection of a maintenance free earthing with single rod as per RDSO specification No. RDSO/ PE/ SPEC/ PS/ 0109-2008 Rev 0 or latest Above/

A4-(i) Action Plan Target Works (Note: Unit rates are inclusive of all

Supply, installation, testing, connecting & commissioning of 100A 3 phase 4 wire system Active Power Filter at indoor Main panel IP 42 enclosure with all connected accessories for Power factor correction and Harmonics Mitigation as per instruction of engineer at site.

Supply, installation testing and commissioning of Single Phase Two Wire Tamper Proof, Static Watt-Hour Meter (Smart meter) of Accuracy class 1.0, 240 v, 50 Hz, Current range 5A/10A-60A conforming to Indian Standards: IS-13779, IS-15884, IS-16444, IS-15959 with Dual Mode (Prepaid / Postpaid) Support, advanced protection features, Inbuilt billing data calculation, Microprocessor and LED based Circuitry Meter with functionalities: Advanced metering mobile 2 application on iOS and Android, both which shows all electrical parameters, alerts and supports credit transfer to meter in addition to HES, Load limiting switch with load setting configuration from HES or through app via BLE, Support tamper event and power outage detection and reporting to HES and to app via BLE, Bi-directional communication NB-loT/ Cellular Communication for remote disconnection also, Tamper proof external enclosure box having IP54 or better, 10 year warranty, support of at least 15 mins instantaneous data for voltage, current, pf, freq. energy and maximum demand load profile, meter should transfer the data for billing and tamper to HES using communication NBiOT or GPRS including Two Years Vending Charges & training charges etc.

Supply, installation testing and commissioning of Three Phase Dual mode Three phase Two Wire Tamper Proof, Static Watt-Hour Meter (Smart meter) of Accuracy class 1.0, 240 v, 50 Hz, Current range 10A-100A conforming to Indian Standards: IS-13779, IS-15884, IS-16444, IS 15959 with Dual Mode (Prepaid / Postpaid) Support, advanced revenue protection features, Inbuilt billing data calculation, Microprocessor and LED based Circuitry Meter with functionalities: Advanced metering mobile application on iOS and Android both which shows all electrical parameters, alerts 3 and supports credit transfer to meter in addition to HES, Load limiting switch with load setting configuration from HES or through app via BLE, Support tamper event and power outage detection and reporting to HES and to app via BLE, with Bidirectional communication NB-loT/ Cellular Communication for remote disconnection also, Tamper proof external enclosure box having IP54 or better, 10 year warranty, Support of atleast 15 mins instantaneous data for voltage, current, pf, freq. energy and maximum demand load profile, meter should transfer the data for billing and tamper to HES using communication NBiOT or GPRS and also support for meter mode switching through authenticated command remotely including Two Years Vending Charges & training charges etc.

Design, manufacturing, supply of 50/7 Ton EOT Crane Panel with VVVF Drive Panel with all connected parts and accessories as per the details enclosed

Design, manufacturing, supply of 10/3 Ton EOT Crane Panel with VVVF Drive Panel with all connected parts and accessories as per the details enclosed

Dismantling, transportation and handing over to SSE at his store the existing panel and erection, testing and commissioning of New EOT Crane panel as per the instruction of engineer at site. Above/

A5-(ii) Lab Arrangements (Note: Unit rates are inclusive of all taxes) 4043907.00 Below/P

Supply and installation of Anti-static ESD safe (conductive) floor mat having thickness 2 mm, roll size: 2 M (W) X 15 M (L) as per specification and scope of work given.

Supply and installation of ESD safe work bench for maintenance of electronic ballast & mobile charging point as per specification and scope of work given.

Supply and installation of ESD safe test bench for maintenance of invertors & measuring monitoring relay as per specification and scope of work given.

Supply and installation of ESD safe operator chair with back rest in black colour with ESD caster as per specification and scope of work given.

Supply and installation of ESD table top mat complete with grounding arrangement, grounding cord & wrist strap in std packing of 30 sq.mtr. of roll as per specification and scope of work given.

Supply and installation of Set of ESD safe personal grounding kit as per specification and scope of work given.

Supply and installation of Set of ESD safe cleaning & storing devices of PCB as per specification and scope of work given.

Supply and installation of Sticky door mat (anti-static) for keeping room clean from minute particles applied with 30 peelable layers in set of 10 pads as per specification and scope of work given.

Supply and installation of red brown strip of electrolytic grade of size: 25 mm x 3 mm along with suitable spacers for fixing arrangement as per specification and scope of work given.

Supply and installation of ESD safe de-soldering station (pump) as per specification and scope of work given

Supply and installation of ESD wrist strap and footwear tester as per specification and scope of work given

Supply and installation of Set of anti-static kit for storing electronic components as per specification and scope of work given

Supply and installation of Temperature controlled ESD safe soldering station as per specification and scope of work given.

Supply and installation of Instrument to measure inductance, capacitance and resistance of an electronic component as per specification and scope of work given

Supply and installation of Instrument to check human body voltage consisting of wall station and palm plate to discharge body as per specification and scope of work given

Supply and installation of Instrument to display and analyze the waveform of electronic signals & draws a graph of the instantaneous signal voltage as a function of time as per specification and scope of work given.

Supply and installation of Electronic device that supplies electric energy to an electrical load & convert one form of electrical energy to another as per specification and scope of work given

Supply and installation/construction as per requirement of set of items required for ESD electronic lab as per specification and scope of work given

Supply and installation of Automotive multimeter consisting of measurement functions, troubleshooting features and accuracy to solve virtually any problem as per specification and scope of work given

Supply and installation of Wireless AC/DC true RMS meter for easy measurement around wires in tight spaces providing instant log, trend and monitor intermittent problems as per specification and scope of work given

Supply and installation of Bench top, dual readout, 4.3" TFT LCD display, true RMS, multi function digital multimeter with USB & LAN for PC interface as per specification and scope of work given

Supply and installation of shelving units consisting of 11 nos. shelves, 40 nos. Bins, 1 no. Kick plate, 80 nos. Bin stoppers as per specification and scope of work given

Supply and installation of Modular system mobile base unit for storing purpose as per specification and scope of work given

A6-AMC/ Vending: Annual Vending charges/ Annual Comprehensive

AMC/ Vending: Annual Vending charges/ Annual Comprehensive maintenance support for the hardware, software, software hosting, network monitoring and maintenance for ten years including SIM charges. The AMC would start from the third year. The AMC would include App facility, 1 Tariff design, 24*7 customer support in toll free number for Customer support for each supplied meter. This includes the necessary training on the usage of mobile app, site, smart meter and hardware including the tariff designing, customer database definition, web-based vending system, Token generation facility (manager & Cashier) and single user licensed meter reading mobile app to read meter data over Bluetooth.