Replacement of decayed doors and windows in some of the AP,L,AL, CLIII, B and MS type Total -20Nos of staff qtrs. and internal painting works of L-46, CLIII-31A and staircase area of MS block-2 - Balance Work

Amount

Dismantling plastering: Dismantling wall plastering (either in cement mortar or lime mortar), removing, transporting and disposal of the debris with all lead and lift etc. complete.

Dismantling Doors/ windows/ ventilators: Dismantling decayed or worn-out wooden/steel/RCC doors or windows or ventilators with frame and shutters, removing and transporting the debris with all lead and lift; and stacking the dismantled materials available for re-use in the departmental store as directed including transportation charges etc. complete.

Cement concrete Solid blocks: Providing and constructing non load bearing wall with solid concrete blocks of size 400x100x200mm having a block density not less than 1800kg/cum having minimum average compressive strength of 4.00N/mm2 confirming to IS 2185 (Part 1): 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour charges, scaffolding, curing, hire charges of machineries et., complete as per specifications. KBS No5.4

RCC door frame : Providing and fixing pre- fabricated non monolithic RCC door frames factory manufactured, in separate parts and assembled at bolt nuts system with mechanical table vibrating as per IS 6523-1983 with using M25 concrete as per IS 456 with a cross section of 60mm X100mm reinforced with 1.70 Kg of TMT steel reinforced with 3.00 no's of 6mm dia main TMT bars and 6mm dia stirrups welded at 40mm C/C in triangle shape per meter length of door frames , including cost of steel and fabrication charges having 3/4 no. stainless steel hinges plate attachment made of 165mm X25mm X 2.5mm stainless steel flat welded with required iron rods and flats with drilling for fixing flat CSK Head Machine screws and nut made out of 304 grade stainless steel screws, nut and MS square nut of size 8X8 square and length 10mm and making necessary provision in concrete for fixing aldrops, tower bolts and hold fasts etc., complete including two coats of oil based enamel primer providing without cill for shutter thickness upto 30mm, 21 days tank immersed curing including cost of labours, materials, HOM etc., complete excluding the cost of door fixtures as per the direction of the Engineer.

M. S. Grill work : Providing and fixing M. S. grill work for windows and ventilators using M. S. flats, or M. S. square rods, or combination of M. S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer of zinc chromate, cost of materials, fixtures, labour and HOM of machinery complete as per specifications.

GRP Door shutter 32 mm thick: Providing and fixing factory made single leaf rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V- stabilized Isopthalic Gelcoat and on layer of 450gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.5mm. Expanded polystyrene EPS) structural foam panel of 29mm thickness and a density of 20 kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28x32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc., shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall conform to RV/TIFAC Composites Design center Standards and specifications and the door shutters tested in conformation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments, and inclusive of supply of shutter to respective work spot (excluding cost of fixture).

Fully glazed window shutter: Providing and fixing in position fully glazed for windows shutters with Mathi/Nandi wood styles and rails of 300mm thick 75mm wide in single shutters with 4mm thick plain/pinheaded glass fixed with wooden beeding including cost of materials, labour charges, HOM of machineries complete as per specification. ( excluding cost of fixtures).

Fixing of door shutters: Fixing of door /windows / ventilators shutters to existing frames including cost of labour, HOM etc., compete as per specifications.

CM 1:6 – 12 mm plastering : Providing 12mm thick cement plaster in single coat with cement mortar 1:6, to stone masonry / Concrete surface including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labours, curing complete as per specifications

Plastic emulsion painting for walls: Providing and applying painting in two coats with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac/ Berger/ Sherwin Williams/ equivalent) over one coat of Asian paints Deco Prime wall primer / equivalent on ceiling/ wall surface to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications. For wall surface (with Primer)

Primer coat to wooden surface: Applying priming coat over new wood surface and or wood-based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease dirt and foreign matter, sand papering and knotting read mix paint including cost of materials, labour, complete as per specifications.

Painting to Wood work: Providing and applying enamel metal paint, two coats, (excluding priming coat) over wood / wood based surface, brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter including cost of all materials, labour etc complete as per specifications. – Asian Apcolite Premium satin enamel/ Nerolac/ Berger or equivalent

Painting to steel work: Providing and applying enamel metal paint, two coats, (excluding priming coat) over new steel of other metal surface, brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter including cost of all materials, labour etc., complete as per specifications. – Asian Apcolite Premium satin enamel / Nerolac/ Berger or equivalent

Plastic emulsion painting for ceiling without primer : Providing and applying painting in One coat with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac / Berger/ Sherwin Williams/ equivalent) on ceiling surface without primer to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications.

Plastic emulsion painting for walls without primer: Providing and applying painting in One coat with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac/ Berger/ Sherwin Williams/ equivalent) on wall surface without primer to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc., complete as per specifications.

Plastic emulsion painting 2 coats for walls without primer: Providing and applying painting in Two coats with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac/ Berger/ Sherwin Williams/ equivalent) on wall surface without primer to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc., complete as per specifications.- without primer

Floor paint: Providing and applying floor painting with ready mix paint in one coat ( excluding primer coat ) on concrete / plastered / floor surfaces brushing to give an even shade after preparing the surface after thoroughly cleaning oil, dirt, Dust other foreign matter, including cost of materials, labour, complete as per specifications or as directed.

Enamel painting on previously wooden surface: KSRB 15-17.19: Providing and applying painting in One coat on previously painted wood surface and/ or wood based surface with enamel paint (to give an even shade, cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of material and labour complete as per specifications - Asian /Nerolac/ Berger or equivalent Make

Painting to previously painted steel work – in One coat: Providing and applying enamel metal paint one coat ( excluding priming coat) on previously painted steel or other metal surface brushing to give an even shad after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.

Varnishing on previously varnished wood – One Coat : Providing and applying varnishing one coat (excluding priming coat) on previously varnished wood / or wood based surface to give an even surface after cleaning the surface of all dirt, dust and foreign matter sand papering so as to produce a smooth dry and mat surface, including cost of materials, labour, complete as per specifications.

Replacement of Aluminium sliding Window shutter: Replacement of broken aluminium sliding shutter of three track window by providing and fixing new shutter frame section comprising top, bottom and sides section of size 40mmx18mm wall thickness 1.25mm weight 0.417kg/m shutter interlock section 40mm x26.7mm wall thickness 1.1mm thick, weight 0.469kg/m, shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc;, providing and fixing 5.5mm thick plain glass shutters fitted with rubber beading including cutting to required length joints mitred subdividing the frame tenoned and rivetterd, using aluminium section colour anodized to 12-15 microns the rate inclusive of providing and removing scaffolding, materials, labour etc complete as per specification and direction of Engineer in-charge.

Repair of Aluminium door/window shutter: Repairing the aluminium door/window shutters by dismantling the aluminium shutters from the existing aluminium frame and removing the glass from the shutter and cleaning the track, replacing the track wheels(rollers), providing rubber beading al round the glass and resetting in to the frame firmly and confirming that smooth sliding movement of the shutter. And rate inclusive of roller, beading, locks, labour, including providing and removing scaffolding etc., complete as per specification direction of the Engineer in charge.

DSOUZA ELECTRICALS

BHARATESH V KULAL

S Jayachandra reddy

SHRUNGAGIRI CONSTRUCTION

SHARATH KUMAR B