PROVN OF ROAD SIDE KERB STONE NEAR FLAG POST, APEX FLOORING AND MARKING ON BADMINTON COURT, ROAD SIDE KERB STONE IN RESIDENTIAL COMPLEX, MONKEY CAGE PROTECTION FOR P-12 AND P-13, SECURITY LIGHTS IN BIOFUEL COMPLPEX, SECURITY LIGHTS IN TECH AREA

Amount

Contract Details

Surface excavation exc (not exc) 30 cm deep in Hard rock/dense soil as specifed and directed.

M&L for 150 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base as specifed and directed.

Returning, filling in including spreading levelling and well ramming in layers n exc 25cm each as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point as specified and directed.

Pre-cast cement concrete type B-1 (1:2:4) 20 mm aggregate for Kerb stone , exc. 10 cm in width and setting in mortar (1:4), complete as specified and directed.

M&L for preparation of new surfaces of any description of concrete over 10cm girth or width, and applying one coat of priming paint and two coat of synthetic enamel paint as specified and directed.

M&L for 6MM EPOXY FLOORING :( Product Make- Tri Poarcon Pvt Ltd. or equivalent any make) Step 1: Surface preparation by mechanical means: Grinding/Levelling of floor whichever suitable including extra arrangement and material used depending on surface. Step 2: Appying one coat of epoxy primer.Step 3: Applying 5mm epoxy underlay screed coat. Step 4: Applying 1 mm epoxy Self -level top coat as specified and directed.Note Proper marking and measuremnt for Badminton Court as standard level with Coloured Strip and proper dimensions of court including all arrangement by contractor .

M&L for Framed work such as grills, gratings, and Iron jali of specified size etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 as specified and directed.

M&L for Framed work such as grills, gratings, and Iron jali of specified size etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors including hinges and handles as needed framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 as specified and directed.

M&L for 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling as specified and directed Note : The rates include for placing in position, binding and joining edges, etc by any mean.

M& L for plain cement concrete type B-1, 1:2:4(using 20 mm graded stone aggregate) as in coping /bed block etc including finished the surface even and smooth and applying two coats of the cement based paint complete all as specified and directed by Engr-in -charge

M&L for preparation of new steel and iron surfaces with any description not otherwise described, over 10cm width or girth and applying two coat of Synthetic enamel over a coat of red oxide zink chrome complete all as specified and directed.

S&F LED Security light fitting 60 watt, with IP66 protection having Pressure dia cast aluminum housing with heat resistant toughened glass, individual LED lenses complete making connection with 1.5 Sqmm, 3 core, copper round wire and suitable for mounted on pole complete all as specified and directed.

S&F steel tubular swaged poles complete with MS base plate of size 300 mm x300mm x 6 mm thick ,final taper plug,bolts,nuts and screws as specified type 410 SP-31 (09 meters long) Including all necessary excavation & earth work in any type of soil for foundation of poles, PCC 1:3:6 type (C-2) (using 40 mm graded stone aggregate ) in foundations of size 1.20 m X 0.60 m X 1.65 m below GL, PCC 1:2:4 type (B- 1 )(using 20 mm graded stone aggregate) in plinth block(coping) of size 600 X 600 X 300 mm above GL , removing surplus soil to a distance n. exc. 50 m & depositing where directed, including necessary form work & numbering of poles, and numbering of the poles shall be done with synthetic enameled painted letter of shape & size complete( M&L)all as specified and directed. (Note -SSR part I clause No.19.5 & 19.52 and other relevant clauses of SSR refers for execution of work and poles shall be procured directly from the manufacturer mentioned in tender documents.) complete inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed.

Excavation in trenches/Pits in any type of soil(soft/loose soil), n.exc. 1.5M wide and n.exc. 1.5M deep and getting out complete, all as specified & directed .

Returning filling in with the earth obtained from Item No 1 here-in-before including spreading, leveling and well ramming in layers n.exc. 25cm thick complete all as specified & directed.

Removal of surplus excavated material to a distance n.exc. 50 Mtr and depositing where directed at a level n.exc. 1.5 Mtr above starting point complete all as specified & directed

M&L for providing old size sub Class 'B' bricks laid perpendicular to the cable abutting each other all as specified and directed by the Engineer-in-charge.

Supply and spreading clean and dry sand (unwashed) in trenches around the cable for cushioning all as specified & directed

Supply & Laying of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 Core.

Supply & Laying of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 06 sqmm 4 Core.

Supply and fix junction box [FRP] of size 250x200x100mm complete with 100 Amp AL bus bar, 4 way, fixed on SMC insulator alongwith 01 No MCB SP 06 amps capacity with necessary fixing arrangements by providing MS clamps 2 nos made out of MS flat 25 x 5mm including nut bolts etc complete.

Supply & fixing of 3 core 1.5 Sqmm wire for connecting LED light to the junction box complete all as specified & directed.

S&F (hook type) complete with 1.5m long GI pipe 40 mm dia medium grade, one no 60 degree bend, MS hook and stay or guy complete all as specified and directed by Engineer-in- charge.

M&L for GI tubing 50 mm dia light grade with all necessary fittings laid in trenches flxed to walls, poles, under road/floor etc for cable protection complete all as specified and directed.

Supply and Fixing of wall mounted fan high speed 230V, single phase 50 HZ 450 mm sweep of model No. Airboll Hi -speed White of make Havells or equivalent make of Bajaj/ Crompton/ Khaitan.

ng associate (BID ID -3407879)