REPAIRS TO FENCING, PATH AND HARDSTANDING AT KARAM SINGH ENCLAVE, CENTRAL AMENITIES AND ADJACENT AREA IN AOR OF AGE B/R-I UNDER GE PANAGARH

Amount

Demolition for brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed

M&L for brickwork with modular flyash bricks, straight or curved on plan exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped ends etc. complete all as specified and directed.

All as per item No 04.00 mentioned here-in-above but inner girth exc 30 cm but n.exc 45 cm in girth in cement concrete using extra cement complete all as specified and directed

M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed

Demolition of concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

M&L for cement concrete type B1 1:2:4 (using 12.5mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges complete all as specified and directed

M&L for PCC in foundation filling and mass concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed

Dismantling posts or struts (Wood/Steel or RCC) any section including taking out embedded portion and making good disturbed ground complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed ,drilling holes , notching for wire,etc , flat iron fillets ( for securing wire mesh etc.) top section fixed including all necessary drilling,bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F framed work such as grills, gratings,etc,with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barried iron door;ladders;framed balustars; walk ways; railings; framed workof water tanks and similar work conforming to Fe 290 Gde-E--165 complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4 ) and finish smooth & even with using extra cement complete all as specified and directed

M&L for preparation of new plastered surface of wall applying of two coats of cement base paint over a coat of cement primer complete all as specified and directed

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

Dismantling fencing wire mesh any type complete all as apecified and directed by Engineer- in -Charge

S&F GI chain link fencing 75 x 75 mm dia not less than 3.50mm, fixed to MS fencing posts and securing with nuts, bolts and fillets etc and tying with MS binding wire etc( weight per sqm n.exceeding 3kg) complete all as specified and directed by Engr-in-Charge.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long complete all as specified and directed

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, n.exc 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub bases complete all as specified and directed

M&L 75 mm thick cement concrete type B1 ,for PCC (1:2:4) (using 40 mm graded stone aggregate) used as in sub base, sub floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed..

M&L for machine pressed prepolished precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

All as per item No 25.00 mentioned here-in-above but 80 mm thickness M-40 Grade complete all as specified and directed

Material and labour for 25 mm thick prepolished chequered cement concrete tiles of approved size,set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as per specification.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc.and getting out in soft/ loose soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/loose soil complete all as specified and directed

Removing Excavated soils exceeding 250m but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed

M/S N B SEN CONSTURCTION

M/S BHATTACHARJEE ENTERPRISE

ANSH CONSTRUCTION

M/S SWAPAN KUMAR MONDAL

SANJAY KUMAR SUPAN

JYOTIRMOY TRADING

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)

S. D. Construction Co.