Renovation of Academic Campus Teaching Blocks, RINPAS Kanke, Ranchi for the year 2022-2023

Amount

Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scaflolding, washing of floor and taxes all complete as per building specification and direction of E/l.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Making plinth protection with bricks of class designation 75 laid on edge in cement mortar 1.6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1:3 (1 cement : 3 fine sand) :

Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. Cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l.

Supplying, fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/l.

4 mm plain.

Providing and fixing tiled false ceiling of specified maaterials of size 595x595mm in true horizontal level 12.5mm thick square edge PVC laminated Gypsum Tile of size 595x595mm,made of Gypsum plasterboard,manufactured from natural gypsum as per IS 2095 Part I and laminataed with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalied polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the kedges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unti

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.15mm thickess after scrapping and propperly cleanig the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicoe additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

Finishing wall with textured exterior paint of required shade: old work(Two or more coats applied @ 3.38 ltr/.10sqm) over and including priming coat of exterior primer applied @ 2.20kg/10sqmm including all compelte job as per direction of E/I.

water proofing for old and new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials appled with brush,rooler or spray for water proofing coating as per manufacturer specification with following ites. (a) surface preparation-providing and cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement laidtrance by clelaning with compressed air & water jet including all materials,labour,tools complete .Pending test to be done after plugging all outlets and to be chocked from solift to identiify secapagae,-do- admixture of sika India Pvt Ltd/Myk schomberg/Dr.Fixt/-do-(b) Ist coat -Applying Ist coat of two component acrrylic modified ready to use,flexible component materials on surface saturated dry roof and side wall of parapet wall upto 600mm by brush or roller after Ist coat of application.45garm of Fibre glass cloth to lay when the first layer is still green Ist coat shouyld be applied @ 1.5kg/sqm/coat for the purpose of measurment the entire treataed surface will be measured(c) 2nd coat-to apply the 2nd coat of two component acrylic modified ready to use,flexible cementious materials right angle to the Ist coat over the glass fibre laid surface,2nd coat shoud be applied @ 0.7kg/sqm/coat For the purpose of measurment the entire trealled surface will be measured After three days of drying the 2 nd coat,the rain water outlots to be plugged and ponding test to be done for 48 hours to dentify seepage leakaage from solift and if found necessaory rectification to be done as per of E/C The water proof coating to be protected from damage before screed over it wataerproofing Brand sika Topseal /Foaroc Brush band RFX/Dr.Fixit pidiffin 2K/MYk Aquain TG. Product performance/chemical Base part A acrylic copolmet ,part B specially graded cementitious pwoder/Density 1.6kg(mixed density) at +27°C/tensila strength 2N/mm2 after 25 days (with Fibre cloth)(According to ASTM D23770) pulout Bond strength 2N/mm2(Concrete failure)(According to ISO4624) slant snear Bond strength -4N/mm2(Accoording to FIP 5.15)(d) pratectionof treated surface with P.C.c-The treated surface should be covered with25mm/50gam PCC of M20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlets in alltrnatepanels of 2mtx2mt keeping 6mm gap between the panel joint-integral water proofing admixture conforming to IS 26462of 100ml per bag of of cement to be added in the scraed concretepaid separtely for this items deep and big fent.All corners shall be chaainfeted with150mmx150mm fillete.The rinfowater outliets of water the peripheral graps betwen PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peeripheral mouth to be sealed with moisture insansitivie epoxy putty of sika India Pvt Ltd/(MYK schormbarg/Dr Fixit/Fosroc for the purpose of measurment the entire treated surface will be measured(e) Groove of PCC surface should be filled with polysulphide sealant paid separataly.Brand sika India Pvt Ltd/MYK schomberg/Dr Fixit/Fosioc.

Covering of treated surface with PCC-Providing 25mm thick cement M20(1;1.5:3) mainting slope in afternate 2mtx2mt penels with approved quality of stone chips of 20mm to 6mm sze graded and graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer with admixtue of interat water proofing and placing in position stacking curing taxes and royalty all complete as lper buildinglspecification and direction of E/I. panels that has been left should be casted next day .there should be 6mm gap between panels Brands sized plastticcoate plus MYK proof WP10,Fasruc complast x421 ic. Dr Fixit pidipoor LW

Providing and filling of 6mm thick Groove beetween 25mmPCC panels with polyesulphide sealant (poring Grada) as per drawing and technical specification and direction of E/I with 18% GST) Brand sika polysulphaide foasroo thioles Cood Dr.Fixit pidiseal PS(42P)MYK seal PS or Etrivlent.

Dismantling damaged Tiles including all complete job as per direction of E/I.

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

Removal of old tarfelt and disposal of debris with all leads complete job as per direction of E/l.

Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Supplying, fitting and fixing 35mm thick solid core type non-decorative Single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direcition of E/l.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

Providing and fixing PVC pipe fitting including all complete job.

couplar 10 mm dia

Band110 mm dia

shoe110mm dia

clip 110mm dia

Providing chequred precast concrete tiles 22mm thick in footpath coutyard jamted with cement slurry mined with pigment to match to shade of tiles including rubbing and cleaning etc complete 20mm thick bed of cement mortar(1:4): Dark shade pigment using white cement

Cleaning jungle including uprooting of rank vegetation,grass,brush wood,trees and saplings of girth up to 30cm measured at a height of 1 m above ground level and rremoval of rubbish upto a distance of50 moutside the periphery of the area cleared.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole,300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2(1cement:2 coarse sand) to match the existing floor. With chloroyriphos/Lindane E.C.20% with 1% concentration.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

Brick lead 8K.M(1K+7P)

sand lead 8K.M.

Stone Metal 20 km lead

Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .

Providing and fixing G.M. non return valve Horizontal / vertical type of approved quality as per specification and direction of E/l. (B) Vertical non return valve

(3) 25 mm dia wt not less than 375 gms

(4) 32 mm dia wt not less than 600 gms

Cutting chajja or concrete for laying G.I pipe and restoring the same with R.C.C (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/l.

Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l

(a) 125 mm thick wall.

(b) 250 mm thick wall.

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.

(b) Mirrors of 6mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror (2) 450x300 mm size

( c) C.P brass towel rail 20 mm x 600 mm with bracket container

(2) C.P brass shop dish container medium quality with screw and hinges etc.

Providing and fixing floor mounted,white vitreous china single piece,double traps syphonic water closet of approved brand/make ,shape ,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system,including all fittings and ixtures with sat cover,cistern fittings nuuts,bolts and gasket etc including making connection with the existing P/S trap,complete in all respect as per direction of E/I.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot restsProviding and fixing white vitreous china pedestal type water closet

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including paintingof fittings and brackets, cutting and making good the walls whereverrequire: White Vitreous China Wash basin size 550x400 mm with apair of 15 mm C.P. brass Single hole basin mixere

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern,with fittings,standard size C.P.brass flush pipe,spreaders with unions and clamps ( all C.P.brass) with waste fitting as per IS: 2556 C.I.trap with outlet grating and other couplings in C.P.brass including painting of fittings and cutting and making good the walls and floors wherever requried. Range of four half stall urinals with 10litre P.V.C automatic flushing cistern

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion

single socketed pipes. 75mm dia

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Single Tee with door 75x75x75mm

Single Tee with door 110x110x100mm

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Single Tee with out door 75x75x75mm

Single Tee with out door 110x110x100mm

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Bend 75mm dia

Dismantling W.C pan of all sizes including disposal of dismantled materials i/C malba all complete job as per direction of E/I

Dismantling 15 to 40mm dia G.I.pipe including stacking of dismantled pipes(within 50 metres lead) as per direction of E/I.

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)

25mm nominal outer dia pipes

32mm nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.conceled

15mm nominal bore

20mm nominal bore

Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI 12701 marketed with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fillings and the base supported for tank.

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with conduit With pino type switch phenolic laminated sheet Suitable size PVC/G.I Box etc. as required.

group B

wiring for Twin control light point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit 2 way paino type switch,phenolic laminated sheet,suitable size PVC/G.I.box etc as required.

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

Wiring for circuit/submain wiring along with wiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire

2x2.5sqmm+1x2.5sqmm earth wire

4x4sqmm+2x4.0sqmm earth wire

S/F Modular type switch/socket supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connections but excluding modular plaate etc as reqd.

5/6 Amps 3pin 5/6 Amp socket

5/6amps,two way switch

15/16 amps,one way switch

15/16amps,6pin socket outlet

Electroniic step fan rregulator,deluxe

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 3pin 5/6 Amp socket outlet and 5/6 amp. Piano type switch connection as painting etc. as req.

S/F Suitable size G.I./PVC Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 6 pin 15/16 Amp socket outlet and 15/16 amp. Piano type switch connection as painting etc. as req.

S/F 2 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd

S/F Brass batton / Angle Holder including connection etc as reqd

S/F call bell buzzer-Supplying and fixing call bell/buzzer suitable for D.C/A.C.single phase 230 volts,complete as required.

I.T.C.of exhaust Fan up to 450mm sweep in the existing 0pening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as reqd.

Supplying and fixing the following way,horizontal type three pole and netural, steel M.C.B.ditrubutionbaord,415volts, on surface/recess, complete with tinned copper busbar, neutral bus bar, earth bar,din bar, interconnection powder painted including earthing etc as required ( butwithout MCB/RCCB/Insolator)

4way(4+12) Double door,Horizontal type

S/F”B” series SPMCB: supplying and fixing 6 amps to 32amps rating,240 volts ,10KA,"B" curve, ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 amps,single pole."B" series

S/F”C” series SPMCB: supplying and fixing 6 amps to 32amps rating,240 volts ,10KA,"C" curve, ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 amps , single pole

Supplying and faixing Following rating, four pole 415 Volts isolator in the existing MCD DB complete with connection testing and commissioning etc as reqd

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of size exceeding 35sqmm but not exceeding 95 sqmm direct in ground including excavation,sand cushioning,protective covering and refilling the trench etc as requied.

supply of following sizedSLPE insulated armoured cable (Make Havel's polycable)

3.5core 95 sqmm

Supply Installation,testing and commissioning of follwing size ceiling fan 3 Bleades confirming to IS:374:2019 including wiring the down rods of standard length(upto 30cm) with 1.5 sqmm FR PVC insulated ,copper wire suitable for 230V 50Hz,single phase supply etc.complete as required.

1400mm(56")BI DC 5 star rating 32W ceiling Fan

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230 V 50Hz,single phase supply etc.complete as required.

20/32 W LED Tube light

Supply and fixing 15/16 watt LED Bulb including all complete job as per direction of E/I.

Supply of metal Exaust Fan 12"(300mm) including all complete job as per direction of E/I.

Supply of LED Street light (45/48W) including all complete job .

S.I.T.C of following,rating approved make LED Bollard fitting with cylindrical r shape of height 600 to 850mm power input-8/9 wall with die cast aluminium housing opel with PC diffuser,IP 65/54 protection conferming to IS:10322 Part 5 etc all complete as required (Excluding plinth charge)

S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required

1'x2' LED panel light

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

VARDHAN SYNDICATE PRIVATE LIMITED