civil works for construction of proposed addition/alteration in control room extension at 220kv S/S Amloh

Amount

Earth work in excavation in fdns,trenches etc in all kinds of soil where pick jumper work is not involved & not exceeding 2.00 mtr depth i/c dressing of bottom & sides stacking the excavated soil clear from the edge.

Supplying and filling of good earth

Disposal of Earth/debris

Dismantling B.W. in cement

Scraping of Brick

Recovery of bricks

Recovery of brick bats

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Cement Concrete 1:8:16 with 40mm gauge stone aggregate

Cement Concrete 1:2:4 with stone aggregate

RCC M-20 machine mixed and vibrated excluidiing steel reinforcment & shuttering in superstr.

DPC 7.5 Cm thick of CC 1:2:4 with 2- coats of bitumen 20/30 penetration @1.65 kg/sqmtr laid hot & sanded

First class burnt brick laid in cement sand mortar 1:5 in foundation and plinth

First class Brick work laid in cement sand mortar 1:4 in foundation & plinth

First class Brick work laid in 1:4 in 1st storey up to 4.00 mtr above plinth level

Extra for c above 4 meters (where any single storey exceeds 4 metres in height) for every additional height of 2 metres or part thereof for Brick Work/ Concrete Block/ Clay Block.

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)

Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.UPVC 110 mm bend

Base course of floor consisting of 100 mm thick CC 1:8:16 & 100 mm thk sand filling using mechanical mixer for mixing of material.

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).Size 600x600 mm

12.5mm thick cement plaster 1:5

20 mm th. Cement plaster 1:5

20 mm thk. Cement plaster 1:6

10 mm th. Cement plaster 1:4

20mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded Vertical

Bearing plaster of 10mm th cement mortar of ratio 1:3

Plinth protection in flat brick flooring in CM 1:4 on 4" CC 1:8:16 and 4" sand filling

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete

Fixed portion for chowkats

for shutter portion

P&F 12 mm Prelaminatrd particular board flat pressed 3 layers or graded wood particular board conforming to IS 12823 in panneling fixed in al. doors with CP brass/stailess steel screws compl;ete as per drawing

P&F glazing in aluminium doors windows ventilators shutters & partitions as per architectural drawings and the directions of engineer incharge

Providing & fixing aluminium sliding bolts ISI marked anodized transparet or dyed to required colour or shade with nut & screws etc.complete:250 mm x 16 mm

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work.

Wiring fan point (With fan box)

Wiring light point

Wiring 6Amp. wall socket point

Wiring 16/20Amp. power plug control point

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq.mm, 1100volts grade

Overall size 2.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

Heavy gauge welded conduit pipe 25mm dia. (ISI marked 1.60mm thick) On Surface

Ceiling rose (flush piano type)

MCB Single Pole 0.5-4amp. (10kA, Curve- C)

Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's, 16 way each

Miniature circuit breaker triple pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

P & F ceiling fans standard make 1400mm sweep with regulator . Bajaj ,Crompton/G.E.C./ Philips/ GEC/Khaitan make.

Supplying and fixing exhaust fan 18” sweep of Crompton Make including louver ( MODEL T5JB1328EB) of 1x28 W T-5

Supplying and fixing General Purpose Tube Fitting of Crompton Make on wall (MODEL DIJB12414EB9)) of 1x36 W

Providing and fixing various size of cable racks

Providing and fixing Angle iron nozing of 30x30x3mm

Providing and fixing MS Chequered Plate 5mm thick

P&F Wire guage to aluminium chowkhat with screws etc. complete in all resoectas directed by engineer incharge.

Fine sand

Cement

Steel

Landing rate including extra carriage and difference of rate of crusher 13.2/12

Landing rate including extra carriage and difference of rate of crusher 11.2/12

Landing rate including extra carriage and difference of rate of Stone ballast

Landing rate including extra carriage and difference of rate of Coarse sand

Landing rate including extra carriage and difference of rate of bricks

Landing rate including extra carriage and difference of rate of tiles

M/s Mukul Kumar Prajapati (BID ID -660258)

Bs builders (BID ID -660524)

BAL CHAND (BID ID -661052)