PROVN OF LADIES TOILET AND CHANGING ROOM AT AF STN SONEGAON, NAGPUR.

Demolition cement Concrete (unreinforced in ground floors and pavings exc 15 cm thickness (below or above ground level) all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foundation etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in soft/loose Soil complete all as specified and directed.

Excavating in post holes (or similar holes)each n exc 0.5 cum, getting out in soft loose soil all as specified and directed

M &L for plain cement concrete in foundation filling type D-2 1:4:8 (40mm graded aggregate) and mass concrete complete all as specified and directed

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Removing excavated material & demolish cement concrete to a distance exc. 1.5 Km but n exc. 5Km and depositing where directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including craking, bending spirally hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality conforming to IS all as specified and directed

- Ditto- all as per item no 7 above but 5mm dia and over up to and including 10mm dia in stirrups complete all as specified and directed.

M&L for RCC (Nominal Mix) type B-1, 1:2:4 (20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (Nominal Mix) type B-1, 1:2:4 (20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span and other similar bands, etc.complete all as specified and directed.

M&L for RCC (Nominal Mix) type B-1, 1:2:4 (20mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed

M & L for brickwork with fly ash bricks old size straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified.

M & L for rough finished formwork to surfaces of concrete flat sides of concrete foundations, footing , bases of columns, raft and raft beams , sides and soffits if any of foundation and plinth beams and similar work complete all as specified and directed.

M & L for rough finished formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

M & L for rough finished surfaces of concrete form work square or rectangular to sides of pillars, posts, struts, columns and stanchions circular on plan complete all as specified and directed.

S & F rolled mild steel roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing, confirming to Fe 410 - W including distance pieces, cleats, etc., complete all as specified and directed

S & F Plates (plain) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of FE 410-W (Gde-E-250) all as directed and specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

S&f pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering with cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on fair faces brick/concrete surface finished even & smooth without using extra cement complete including WPC @ 3% by weight of cement all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 to be finished even smooth with out using extra cement all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coat of distemper oil emulsion over 3mm thick wall care putty on wall, a coat of suitable primer on newly plastered surfaces on wall complete all as specified and directed.

M&L for preparation of surfaces and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and incl a coat of pink primer all as specified and directed.

M & L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

Supply only integral water proofing compound

M&L for hardcore of gauge not exceeding 63mm,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and directed

M&L 100mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floors complete all as specified.

M &L 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base complete all as specified.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc,over 15 mm thick screed bed in CM(1:4),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed

M & L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement tomatch over 15 mm thick back coat in CM (1:3) on fair faces of brick work or concrete surfaces

M & L for light shade vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces for skriting etc. set and jointed over 15 mm thick screed bed in CM(1:4), in neat cement slurry and pointed in white or coloure cement to match complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fix in opening as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in frame as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S& F in frame Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face at site as per specification & drawing in SSR Part I

S & F mild steel medium weight cold rolled butt hinge 100mm size complete all as specified and directed

S & F mild steel pressed handles, oval type, stove enamelled black of 150mm size complete all as specified and directed.

S & F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed (200mm long) complete all as specified and directed.

S&F mild steel sliding door bolts, 250 mm lon plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and fixed complete all as specified and directed.

S&F brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F in vitreous china wash basin, white flat back size 450X300mm including waste, chain & plug and poreclain stopper and bracket etc. complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc. with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed

S&F brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed fitted bore of trap 40mm complete all as specified and directed.

S & F Vitreous china wash down water closet pan ( Pedestal pattern) white fixed in floor including P or S trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc.complete all as specified and directed.

S&F white plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F quality glass frameless decorative wall mount mirror of size 12 X 36 inch rectangular,unframed, screws and cup washers complete all as specified and directed.

S & F PVC flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle, including bracket and 38mm dia flush pipe of polyethylene for low level cistern complete all as specified and as directed

S&F GI tubing 20 mm bore medium grade with all fitting and fixed to wall ceiling or laid in floor etc complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fitting and fixed to wall ceiling or laid in floor etc complete all as specified and directed.

S&F 15mm bore stop/angle valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F 15mm bore bib taps fancy type chromium plated with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed

S&F 15 mm dia pillar tap fancy type with capstan heads chromium plated secrewed down, high pressure with or without lettered "Hot or Cold with long sereuled shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F 20 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 110 mm dia outlet PVC (SWR) floor trap plain with grating including jointing with solvent cementcomplete all as specified and directed.

M&L PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall all as specified and directed.

M&L PVC (SWR) bend any radius 110mm dia complete all as specified and directed.

M&L PVC (SWR) tee any radius 110mm dia complete all as specified and directed.

S&F PVC(SWR) P trap of 110mm dia complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as spd and directed.

S & F PVC connections suitable for 15 mm dia pipe with PTMT nut of lenth 450 mm complete all as specified and directed.

S&F 15mm dia stop valves fancy type,chromium plated complete all as specified and directed.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete as specified and directed

S & F CP tubular towel rail, 20 mm dia, D Type, 60 cm long between flanges complete all as speccified and directed.

S&F Curtain rod, mild steel, chromium plated with fixing brackets,stops, rollers etc, complete all as specified.

M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in roof kerb or mud stops and side of path and the like including weathering, slightly rounded or chamfered angles and throating for internal surface channel complete all as specified and directed.

M& L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh fixed or laid/ inserted to timber/GI/Aluminium framework with screws all incld Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incld suspended wire 3mm dia @1200mm c/c including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specifiedall as specified as speicified and directed. (Note : Desing of ceiling Approved by EIC)

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S & f Brass chromium plated soap tray complete all as specified and directed

M & L for machine cut cudappah stone slab 20-25mm thick over cement screed base 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M & L for machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting , dado and pilllar laid over cement backing coat 15mm thick in Cm (1:6) and jointed with grey cement slurry mixed with prigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors set and jointed over 15 mm thick screed bed in CM (1:4), in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

S & F for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M & L 25 mm thick 2nd class hardwood for glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series) frame 47 x 50 mm ullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and as directed . (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S &F 4mm thick glass sheet ordinary quality & fixing with oil putty in squares exc 0.50 sqm in each pane complete all as specified & directed.

S &F 3mm thick figured glass sheet ordinary quality & fixing with oil putty complete all as specified & directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed .

S & F Brass CP mixer (15 mm bore dia ) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified & directed.

S & F Brass chromium plated shower rose 125mm size fixed complete all as specified & directed.

S & F Ball 20mm brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed.

S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified & directed.

S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified & directed.

M&L 200 mm dia (internal) reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and directed

M&L for concrete bed in PCC 1:3:6 type C2 (using 20 mm graded stone aggregate) to drain pipes including packing under,and haunching against the sides of pipes, after they are laid and tested for 200 mm dia (internal) of NP3 pipes complete all as specified and directed (Pipes shall be measured & paid separately).

Removal of excavated materials to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.

M & L for point wiring with two single core 1.5 Sqmm cabel (nominal area) stranded copper conductor, PVC insulated unsheathed FRLS cable, 1100 V grade, conforming IS:694 & colour code in conduit system of wiring, drawn in and including concealed rigid PVC Conduit not less than 20 mm dia with modular metal flush box, 1.6 mm thick of suitabe size and modular white cover plate with frame of suitale module and wiring to be terminated in pressed steel sunken boxes including all accessories fixed with chromium plated screws and washers and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unheated FRLS cable as in earth wire (green colour) connecteedd to common earth only complete all as specified and directed for following:-

One light ,ceiling ,exhaust point contrccontrolled by one switch

All as per item no. 90 above here in before but with copper conductor cable of size 1.5 Sqmm for one 3 pin socket outlet, 5 amp on same board.

All as per item no. 1 above here in before but with copper conductor cabe of size 2.5 Sqmm for one 3 pin socket outlet, 5 amp on independent board.

All as per item no. 90 above here in before but with copper conductor cabe of size 4 Sqmm for one 3 pin socket outlet, 16 amp on independent board.

S & F for Modular switch, flush button, 1 way, 6A, 1 module, complete all as specified and directed

M & L For modular socket outlet 2/3pin, 2 module, 6Amps, 230 Volts AC, complete all as specified and directed

M & L For modular socket outlet 2 in 1, 6 pin, 2 module, 6/16Amps, 230 Volts AC, complete all as specified and directed

S & F for Modular switch, flush button, 1 way, 16A, 1 module, complete all as specified and directed by Engineer- in- charge.

S & F ceiling rose surface backlite 65x50mm 3 terminals completeall as specified and directed

Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable complete all as specified and directed.

Supply and fix LED tube light fitting capacity 9 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable all as specified and directed.

S & F 35/36Watt Recessed LED perforated Single Window modern Designed enabled by advanced LFD light.it blandes into celing plane &maintain Uniform luminance across aperature to enhance visual comfort ceiling tile provided with a drop down acrylic diffser suitable for 600X600 MM ceiling incluiding extra frame for fixing at POP/ Gysum Ceiling mounted version including LED light complete. The 36W system shall be operating at 220-240v AC supply having internal driver. Individual LED's should not be visible for glare free output, and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum 1.5 Sqmm size and testing complete, including taking down old unserviceable fitting all as specified and directed.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 415 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.

S&F MCBs 20 Amp DP with necessary connection in DB box complete all as specified and directed.

S & F MCBs "C series" of capacities SP 06 Amp to 32 A 240 volt all as specified and directed.

Supply & Fix wall mounted fan of size 400 mm sweep single phase 230V AC occeating type, variable speed, connected the fan to ceiling rose incld prov of flexible cooper cable complete all as specified and directed.

S&F Exhaust fan made up of sturdy Engineering plastic complete with louvers shutter , voltage 230 V, 50 Hz, RPM 1200 , Cooper winding of sweep 300 mm complete all as specified and directed.

Earthing with galvanised iron earth plate electrode 600 x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to GI earth strip 32 x 6 mm connected to earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel with & including ; PCC 1:3:6 C1 pit with cover of RCC 1:1.5:3 A1 40 mm thick reinforced with 3 Nos, 6 mm dia bars both way, watering arrangements with 20 mm GI medium grade pipe ISI marked, GI funnel with GI mesh, filling with mixture of common salt & charcoal in alternate layers, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete. (Note :- GI earth strip & protection pipe with GI pipe protection shall be measured & paid separately)

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe for laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter or suitable for upto 50 sqmm 3.5 core cable with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches,wall, floor , pole including bends, sockets and other connected accessories complete all as specified and directed .

Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed (a) 6 Sqmm x 2 core complete all as specified and directed .

S&F Isolator DP 240 volts 40 Amp AC in existing panel board with modification /fabrication of existing panel board as directed by E-in-Charge complete all as specified and directed.

Suply and laying of GI tubing 25 mm bore with all fittings including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc or laid in trenches all as specified.

Supply and fix gun metal globe or gate valves 25 mm with iron wheel head screwed both ends for GI pipe complete all as specified and directed