Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC | L1 | Accepted-AOC L1 |
Tender Value
₹6.6 L
EMD Value
₹13,208
Closing Date
27 Apr 2022, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Commissioner, OM
II cross, Jawahar Nagar, Puducherry-5
Improvement of Manthaveli Thidal at Veemacoundanpalayam in Indria Nagar Constituency.
2022_DLA_9452_2
OM/e-tenders/573/2021-22
Open Tender
Civil Works
Works
90 days
INDIRA NAGAR
Please refer Tender documents
3 documents required · 3 mandatory
₹525
₹13,208
18 Nov 2022
21 Apr 2022
27 Apr 2022
21 Apr 2022
27 Apr 2022
21 Apr 2022
90 days
Amount
Code No. 2.27C.1 Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth , breaking clods , watering , rolling each layer with 1/2 tonne roller , or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lift (Payment will be made based on level measurement)
Code No. 6.4.1 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:4 ( 1 cement : 4 coarse sand)
Code No. 13.1.1 12mm cement plaster of mix -1:4 ( 1 cement: 4 fine sand)
Code No. 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer
Code No. 13.46.1 Finishing walls with acrylic smooth exterior paint of required shade - New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm
Code No. 13.50.3 Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron / steel works
Code No. 13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work
Code No. 14.43 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete
Code No. 15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar
Code No. 2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil
Code No. 2.27 Supplying and filling in plinth with river sand under floors, including watering , ramming consolidating and dressing complete
Code No. 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Code No. 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)
Code No. 4.2.5 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns,piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping,bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. upto floor five level, excluding the cost of centering ,shuttering and finishing - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
Code No. 4.3.2 Centring and shuttering including strutting, propping etc. and removal of form work for - retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc
Code No. 5.12 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Code No. 5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete upto plinth level – Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more
Code No. 10.25.2 Steel work welded in built up sections / framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required – in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Code No. 13.9.2 Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement - 20mm cement plaster
Code No. 30.27 Providing and fixing cement concrete rings of 900 mm dia. 300mm height and 40 mm thick in 1:2:4 (one cement , two sand , and four 12mm HBG metal) with slots in the walls and provided with nominal reinforcement . The rate to include the cost of cement concrete rings, transportation to site , labour for erection , fixing with cement mortar 1:3 (one cement and three sand) all complete
Code No. 30.29 Supplying and lowering of UPVC 150mm dia Plain casing pipe confirming to IS: 12818-1992 with relevant amendments with class designation CM and with minimum wall thickness of 7.5 mm as per I.S.Code into the bore well with proper vertical alignments etc. Including the cost of materials , but excluding the cost of labour for positioning the assembly for lowering purpose using contractor's rig
Code No. 30.30 Extra for providing 3 mm slots in 150mm dia.UPVC casing pipes
Code No. 30.31 Supplying and packing of 8mm size down gauge graded pebble including filling the annual space gradually complete. The pebbles should be of free from disintegrated pieces.(It will measure in stack for the purpose of payment)
Code No. 30.32 Providing and fixing netlon mesh
Code No. 31.161.1G Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 140mm dia.
Code No. 31.171.1J Providing and fixing in position UPVC moulded endcap (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 140mm dia
Code No. 33.27.1.1 Drilling of borewell any where in Pondicherry including tranportation in alluvial soil, sedimentary strata of clay,sand stone, shale, pebbles, boulders etc. by first taking a pilot bore of 140mm / 150mm / 200mm and then enlarging to required dia by direct or reverse rotary mud circulation method,including fuel, labour for drilling, bentonite mud, water required for drilling at the site, contruction of mud pit (water available within a lead of 1.5Km) using rotary rig. -Upto 60 mts depth ending below ground level.
Code No. 33.27.3.1 Reaming from 200 mm dia pilot bore to 350mm dia bore. Upto 60 mts depth ending below ground level
Code No. 33.27.5 Charges for developing the borewells with air compressor of 600 CFM capacity (minimum 8 hours) including transportation labour and fuel charges for compressor and conducting yield test by"V" Notch methods.
Code No. 33.27.10 Lowering of UPVC plain casing pipe/ribbed screen slotted pipes into the borewell including cost of cleaning material, fixing of M.S centering guide size of 25mm x 3mm thick suitable for 200mm dia UPVC pipe,including cost of labour for positioning of assembly for lowering purpose using rig
Code No. 33.27.13 Providing and fixing M.S. top cover suitable for UPVC pipes including the cost of materials and labour etc.
Code No. 33.27.16 Providing and fixing of UPVC End Cap embedded in M.S. Cone suitable for UPVCcasing pipe including the cost of materials and labour for jointing.
Basic Code No. 1727 Providing and fixing R.C.C.NP 2 collars of 1200mm dia, 300mm height and 40mm thick in 1:2:4 (one cement: two sand : four 12mm HBG metal) with slotes in the walls and provided with nominal reinforcement. The rate to include the cost of cement concrete rings, transportation to site, labour for erection, fixing with cement mortor 1:3 (one cment and three sand) all complete.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_10309.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .