Renovation of boundary wall, drain, construction of guard room, landscaping and other works in Quarter No-B-2 (New) (F type) PHED colony, Hinoo, Ranchi

Amount

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 15 % perforated area withperforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, withll 4 side tapered and backed by acoustical tissue withNRC value not less than 0.60

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Finishing wall with textured exterior paint of required shade: New work(Two or more coats applied @ 3.28 ltr/.10sqm) over and including priming coat of exterior primer applied @ 2.20kg/10sqmm including all compelte job as per direction of E/I.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.63 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90kg/ 10 sqm)

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand including manufactured sand derived from Recycled concrete Aggregate(RCA) upto 20%:3 graded stone aggregate 20 mm nominal size Recyled concrete Aggregate(RCA)upto 20%)

Providing and Fixing factory made UPVC door frame made of UPVC extrudedsections of size 65 mm x 53 mm, having wall thickness 2.0 mm (± 0.2mm).,corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of size 28 mm x 30 mm mm having wall thickness 2 mm thickness (± 0.2 mm) including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer’s specification and direction of engineerin-charge

Providin and fixing existing door frames 30mm thick factory made PVC door shutter made of style and rails of a UPSC hollow section of size 60mmx30mm and wall thickness 2mm+0.2mm with in built decorative moulding edging on one side.The styles and rails mitred and joined at the conrers by means of M.S.galvanised/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws the lock size 52x20mm and1mm+0.1mm wall thickness.The lock rail made of of ‘H’ section,a UPVC hollow section of size 100x30mm and23mm+0.2mm wall thickness fixed to the shutter frame filled with a UPVC multi chambered single panel of size not less than 620mm,having over all thickness of 20mm and1mm+0.1mm wall thickness.The panels filled vertically and tia bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-chage.

Providing and fixing factory made Upvc glazed /wire mesh windows/vdors comprising of lead free uPVC multi-chambered fame and mulion(where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I

Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1 . 2 metre).

Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed door comprising of UPVC multi-chamberred frame,sash and mullion(where ever required)extruded profiles duly reinforced with 1.60±0.2mm thick galvanized muld steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension,EPDM gasket,zinc alloy(white powder coaated)3D hinges and one handle on each side of panels along with zinc plated mild steel multi point lockinghaving transmission gear,cylinder with keeps and one side key,G.I.fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws,etc.Profile of frame &sash shall be mitred cut and fusion welded at all corners,mullion(if required)shall be fusion welded including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacement finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality all complete as per approved drawing & direction of E/I.(Single/double glass panes and sillicon sealent shall be paid separately)variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note-for uPVC frame,sash and mulion extruded profiles minus 5% tolerance in dimension i.e.in depth &width of profile shall be acceptable.

Fixed window/ ventilator without mullion/ transom Using R1 series with frame (33 mm & above) x (35 mm & above). (Height upto 0.90 metre)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0mm thickness(weight not less than 10kg/sqm)

Providing and fixing fly proof wire gauze to windows,clearstory windows& doors with M.S.flat 15x3mm and nuts & bolts complete stainless steel (grade 304) wire gause of 0.5mm dia wire and 1.4 mm aperture on both sides including all complete job.as per direction of E/I.

Supplying of 4mm thick ACP approved quality including all complete job as per direction of E/I.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 : 4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 1200 mm

Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facials and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels.Granite stone slab of colour black,cherry /Ruby red area of slab upto 0.50sqmm

Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat square bar as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt)

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)

Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. completeHot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing randam rubble stone masonry in CM (1:4) in foundation and plinth with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.

supply of 12mm thick marine ply wood conforming to IS:710,including priming coat on unexposed surface all complete job as per direction of E/I

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below.

1.The surface to be polished in rubbed with sand paper 80/120 no and then with sand paper of 160/180nos

2-Applying two coats of sealer with spray gun and allowing sufficient drying time for Ist coat and 2nd coat is allwed to dry for 8 to 12 hrs

3-On drying of sealer coat,wet rubbing with emery cloth of finer grading with ample wataer to rremove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allwed todry for 12hrs.

4.On this ,Ist coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in rerquired kproportion.This Ist coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,which is further allowed to dry for 12 hrs.The final melamine polish is applieid with compressor pressure spray gun using melamine clear polish kand melamine thinneer mixed is required proportion complete as per direction of Engineer-in-charge.(Final coat to be done in 1 or 2 layers without gap of time)

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

Providing and fixing concertina coil fencing with required dia 600mmdia 10metre openable length(total length 90m)(having 50nos,round per 6 metre length) up to 3 m height of wall with existing angle irn ‘Y’ shaped palced 2.4m or 3.00m apart and with 9 horizontal R.B.T.stud tied with G.I.staples and G.I.clips t retain horizontal including necessary bolts or G.I.barbed wire tied to angle iron all complete as per direction of Enginner-in-charge withreinforcedd barbed tape(R.B.T)/spring core(2.5mm thick) wir f high tensile strength of 165kg/sqmm with tape (0.52mm thick) and weight 43.478gm/metre (cost of M.S.angle,C.C.blocks shall be paid separately)

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Stone Metal 20 km lead

Brick lead 8K.M(1K+7P)

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment)

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

S/F/F all height wall panneling of 12mm ply wood( single layer) with MDF board excluding painting work all accessories all complete as per building specification and direction of E/I

S/F/F all height wall panneling of 12mm ply wood( double layer) with MDF board excluding painting work all accessories all complete, as per building specification and direction of E/I

S/F/F all height wall panneling of 12mm ply wood with PVC wall Louver with all accessories all complete, as per building specification and direction of E/I

supply,fitting and fixing 2 feet deep cupboard/ wardrobwith -19mm thick BWP Grade, marine ply as per IS 710 of approved brand and stick to laternal side 1.5mm thick laminated and external front side 4mm thick coir veneered with high gloss mellamine polish including all cost of materials labour but excluding the ktexes and royality all complete as per building specification and direction of E/I

Providing & fixing Risre of step panneling with wooden framed by 12mm thick both side best quaity ply. 12mm thick MDF boaard all matterials and labour excluding painting work all complete, as per building specification and direction of E/I

Providing Duco paint finishing with all materials and labour all complete as per building specification and direction of E/I

Providing fitting and fixing wall paper of decorative approved design as per direction of E/I. inclouding cost of wall paper,adhesive,labour and scaffolding all complete as per direction of E/I.

Providing fitting and fixing wooden bead patti for decorative purpose on wall panelling and wooden wardroe/cabinet as per building specification and direction of E/I

Providing fitting and fixing ACE embossed texture and single suded Uv protection and multi wall and supply,both side Uv protection and special treatment and translucent and opaque on requet and doble wall and polycarbonate sheet as per building specification and direction of E/I

Supply fitting and fixing cement ksheet and shingles roof cladding over exusting MS frame all complete as per building specification and direction of E/I.

Supply fitting and fixing of good quality mirror of approved design and brandas per building specification and direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

K & G ASSOCIATES (BID ID -665722)