Repairs and Renovation of Existing School Building (East) at PU Primary school in Karasaloor Village in Pethanadarpatty Panchayat. in Keelapavoor Panchayat Union Tenkasi District

Main Estimate

Dismantling the existing Flat & Pan Tiles or Manglore Tile over Flat Tiles without roof timbers and cleaned away from the site including cost of all labour charges etc., complete.

Paving the floor with best approved quality fine polished shahabad stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification

Supply and Delivery of Mild Steel Rectangular tube section including all cost and conveyance all labour charges etc complete.

Supply and fixing of PUF Roof panels made up of Minimum 0.5mm thick PPGI Corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC Free polyurethane form(PUF) OF DENSITY 40kg+2kg/cum as insulation in between.The polyurethane form shall confirm to latest IS 12436.The minimum thickness of PU Foam layer shall be 29mm for having 30mm thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & Shall have a Zinc Coating of minmum 120 GSM as per IS 277/1992,5-7 Microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side/outer side.The PPGI Sheets /PUF Panels shall have a Protective guard film of minmum 20-25 microns to avoid scratches to finished panel during transportation.Providing ridges or hips, encasing the ends of Panel with plain GS Sheet fixed with polymer coated J or L hooks bolts and nuts 8mm dia G.I Limpet and bitumen washers etc complete excluding the cost of trusses,purlins and inclusive of cutting to size and shape wherever Required.

Distempering two coats using best quality and approved colour of oil bound distemper over one coat of cement paint primer including all cost and conveyance of materials, labour charges etc.,

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting with approved colour Over old Iron work including cost and conveyance and labour charges etc., complete.

Provision for Electrification works

Fan Points/Light Points

b)SD36 (Plug Point)

a)Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW

f)SD110 (Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.)

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)