WBPWD/SE/KHC/NIQ-17/2019-20

Amount

(A) FIRE WATER PUMPING SYSTEM :- Supply, erection, testing & commissioning of Electrical Motor Driven Main Pump, Centrifugal Horizontal Type, with gland packing capable of deliver 2850 LPM at 88 MWC. The pump shall be coupled with TEFC motor of suitable KW with speed of 2900 RPM with all accessories and complete set shall mounted on common base frame. The quoted rate shall include fixing of coupling, coupling guard and foundation bolts etc. Civil foundation will be client's scope.

Supply, erection, testing & commissioning of Diesel Engine Driven Common Stand-by Pump, Centrifugal Horizontal Type with gland packing and capable to deliver 2850 LPM at 88 MWC. The pump shall coupled to suitable HP of Diesel Engine radiator water cooled type with speed of 1800 RPM with all accessories including diesel engine control panel and complete set shall be mounted on common base frame. Batteries & battery leads with stand, fuel tank (for 4 hrs operation) with stand and gauge glass, fuel piping with valves. The quoted rate shall includes radiator water cooling piping (if required), coupling guard and other standard accessories, RCC foundation (as recommended by manufacturer) and foundation bolts, etc. Civil foundation will be client's scope.

Supply, erection, testing & commissioning of Electric Motor Driven Jockey Pump, Horizontal Centrifugal Type capable to deliver 180LPM at 88 MWC. The pump shall coupled to TEFC motor of suitable KW with speed of 2900 RPM with all accessories mounted on common base frame.

Supply, erection, testing & commissioning of Compartmentalised Common Control Panel for Electrical Motor Driven Pumps as per technical specification attached with this tender document. All components shall be housed in a common cubicals made of 16 swg. M.S. sheet with required stiffeners (if required). The panel shall be powder quoted of approved colour both inside and out side. The panel shall have both bottom and top cable entry provisions and panel shall be mounted on pedestal of 300mm height.

Supply, laying, testing & commissioning of FRLS, PVC outer sheath, steel armoured, aluminium / copper conductor, 1100 Volt Grade power cables with gland etc for above pumps. The cable shall be laid in tray / hume pipe / in trenches / on walls / floors etc as required. Cables laid out doors shall include the price of earth excavation providing brick and sand protection, refilling and compacting the earth. 3c x 95 sq mm Aluminium cable for main pump

3c x 10 sq mm Aluminium cable for jockey pump

12c x 1.5 sq mm Copper cable for instrumentation

2c x 1.5 sq mm Copper cable for instrumentation

G.I. earthing strips of 50mm x 6mm thick, strips shall run on floor / ceiling / walls, from pump to control panel with necessary accessories as required.

Supply & fixing of perforated G.I. sheet Cable Tray with necessary angle iron suspension supports, anchor fasteners etc. 300mm X 3mm X 40mm

150mm X 3mm X 40mm

100mm X 3mm X 40mm

Supply and installation of Pressure Gauge, 1/2 inch bottom entry, of suitable range for pump sets with necessary ball valves and other accessories.

Supply and installation of Pressure Switches, SPDT type, of suitable range for pump sets with necessary ball valves and other accessories.

Supply, fabrication, erection & testing of MS black steel pipe Heavy grade conforming to IS : 1239/3589 including all fittings viz. elbows, tees, flanges, reducer, clamps, MS support, dash fasteners etc. All pipes and fittings to be painted with two coats of approved red oxide primer and two coats of approved red enamel paint. Where ever applicable, cutting of walls, floors or other areas and making it good shall be in the scope of vendor . 250 mm NB x 6 mm thk

200 mm NB x 6 mm thk

Supply, installation, testing & commissioning of C.I. Gate Valve as per IS:14846 (PN 10) with matching flanges complete with nuts & bolts. Size 150 mm NB

Size 80 mm NB

Size 50 mm NB

Supply, installation, testing and commissioning of C.I. Non Return Valve wafer type with companion flanges, nuts & bolts and gaskets. Size 150 mm NB

Size 50 mm NB

(B) HYDRANT SYSTEM :- Supply, erection, testing of MS black steel pipe Heavy Grade conforming to IS : 1239Part - 1/3589 including all fittings viz. elbows, tees, flanges, etc. reduces, clamps, included with joints complete with anticorrosive treatment to buried pipes by wrapping with two coats of 4mm thick PYPKOTE membrane applied over a coat of primer for external yard hydrant network. 150 mm NB

Supply, fabrication, erection & testing of MS black steel pipe Heavy grade conforming to IS : 1239/3589 including all fittings viz. elbows, tees, flanges, reducer, clamps, MS support, dash fasteners etc. All pipes and fittings to be painted with two coats of approved red oxide primer and two coats of approved red enamel paint. Where ever applicable, cutting of walls, floors or other areas and making it good shall be in the scope of vendor. 150 mm NB

Supply, installation, testing & commissioning of C.I. Gate Valve as per IS:14846 (PN 10) along with companion flanges, nuts & bolts and gaskets. Size 150 mm NB

Size 100 mm NB

Supply, installation, testing & commissioning of C.I. Butterfly Valve as per IS:5155 (PN 10) with matching flanges complete with nuts & bolts. Size 80 mm NB

Supply, installation, testing and commissioning of C.I. Non return Valve wafer type with companion flanges, nuts & bolts and gaskets. Size 150 mm NB

Size 100 mm NB

Supply, installation, testing and commissioning of S.S. oblique type single headed Landing Valve with 80 mm inlet and 63 mm with S.S. instantaneous male coupling rubber cap and chain conforming to IS : 5290.

Supply, installation, testing and commissioning of S.S. oblique type single headed external Hydrant Valve with 80 mm inlet and 63 mm with S.S. instantaneous male coupling rubber cap and chain conforming to IS : 5290.

Supply, installation, testing & commissioning of S.S. branch pipe with 20 mm nozzle conforming to IS : 903.

Supply, installation, testing & commissioning of 63 mm dia. rubberized RRL hose pipe, 15 m length conforming to IS : 636 Type II, ISI marked with S.S. male and female instantaneous coupling conforming to IS 903.

Supply & installation of MS hose box of fabricated from 16 SWG CRCA sheet double door with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. (750x600x250 mm)

Supply & installation of swinging type hose reel drum fabricated from 14 SWG CRCA sheets painted with red colour stove paint 2 coats over 1 coat of primer with 30 m long 20 mm dia rubber hose pipe with SS self closing shut – off nozzle of 5 mm outlet fixed on wall.

Supply & installation of S.S. 2 way inlet connection with 63 mm dia. instantaneous type inlet, 100 dia. flanged outlet with built in check valve for fire brigade connection to fire riser (IS : 904).

Supply & installation of Gunmetal 4 way collecting head with 63 mm dia. instantaneous type inlet 150 dia. flanged outlet with built in check valve for fire brigade connection to fire ring main (IS : 904).

Supply & installation of automatic 25 NB Air Release Valve with suitable accessories.

Supply & installation of Gunmetal Fire Brigade Draw out connection with necessary foot valve for reservoir.

(C) AUTOMATIC SPRINKLER SYSTEM :- Supply, fabrication, erection & testing of MS black steel pipe Heavy grade conforming to IS : 1239/3589 including all fittings viz. elbows, tees, flanges, etc. reducer, clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the walls, floors or any other surface. 150 mm NB

Supply & fixing of Sprinkler Head. Pendent Type

Upright Type

Side wall Type

Supply, erection and testing of Installation Control Valve complete with trims & gong. Size 150 mm NB

Size 100 mm NB

Providing & fixing Butterfly Valve as per BS :5155 (Wafer type) (PN10) matching flanges complete with nuts & bolts. Size 150 mm NB

Size 100 mm NB

Size 80 mm NB

Size 50 mm NB

Providing & fixing Flow Switch.

Supply & installation of automatic 25 NB Air Release Valve with suitable accessories.

Supply & installation of Ball Valves in S.S Metal Construction to IS: 9890. Size 25NB

Supply, installation, testing & commissioning of Rossette plate with approved colour.

Supply, installation, testing & commissioning of SS Flexi hose of size 25mm X 1500mm long.

(D) PORTABLE EXTINGUISHERS :- Supply & fixing of 6 Kg ABC type dry power extinguisher consisting of welded MS cylindrical body with discharge valve, nozzle and hanging arrangement complete conforming to IS:15683.

Supply & fixing of 9 Litre Water type CO2 (ISI marked) extinguisher including all accessories with wall bracket & raw plug conforming to IS:15683.

Providing & fixing 4.5kg CO2 type (ISI marked) extinguisher including all accessories with wall bracket & raw plug confirming to IS:940.

Providing & fixing 9 Litre mechanical Foam type (ISI marked) extinguisher including all accessories with wall bracket & raw plug confirming to IS:15683.

(E) SIGNAGES :- Supply and installation in position the "FIRE EXIT" Sign with luminescent colour having size 300 x 100 mm.

Supply and fixing signage with printed "IN CASE OF FIRE, DO NOT USE LIFT. USE STAIRS ONLY" OF 1.5 cm height letters in red with white background. The size of the board shall be 300 x 250 mm and shall be fixed at the height of 2 mtrs. from finished floor near Manual Call Point.

Supply and fixing in position the signages "FIRE ORDER" contain the following matter on 3 mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 1200 x 1000 mm. a) ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATION. b) EVACUATE THE OCCUPANTS BY USING FIRE EXIT AND EMERGENCY EXITS ONLY AND ASSEMBLE AT ASSEMBLY POINTS. c) BE CALM AND DO NOT GET PANIC, WALK DO NOT RUN.

(F) MISCELLANEOUS WORK :- FIRE RATED DOOR : Supply, transportation, loading & unloading, storing, installation and testing of Steel Fire Check door of 2-Hours capacity with door frame, handle, panic bar, hinges etc. conforming to IS:3614 (Part-II) and BS:476 (Part- 20 & 22) complete in all respect as per approved Design, Drawing and instruction of the Engineer-in-Charge.

CIVIL WORK : Excavation & back filling , hole cutting jamming, Core Cutting, Road crossing, Supply & laying of Hume Pipe of 300 mm dia etc.

PUMP HOUSE : Construction of masonry Pump House over the U.G. Reservoir having approximate dimension of 6.00m x 4.00m x 4.00m (Ht.) with RCC roof of M-25 Grade Concrete including roof treatment work with (1:2:4) mix cement concrete, 2 coats of Acrylic Polymer Modified Paint & top layer with APP membrane, 1st Class Brickwork, Aluminum window, Rolling shutter, RCC Pedestal within Pump Room having depth of 200 mm, wall and ceiling finish with Putty & Distemper and complete as per approved Design, Drawing and instruction of the Engineer-in-Charge.

SEMI-UNDERGROUND RCC WATER RESERVOIR : Construction of Semi-Underground Water Reservoir (Approx. internal size: 8.0mtr. x 6.0mtr. x 2.35 mtr. with a free board of 250mm) with 2 nos. interconnected chambers having floor, roof and walls of M-25 Grade Concrete, inside & outside plastering with water proofing compound, flooring with Artificial Stone Flooring including Neat Cement Punning, requisite number of grouting with relevant materials including all materials and labour, necessary dismantling of existing structure, shoring work etc. complete in all respect as per structural drawings issued by the Department and direction & instruction of the Engineer-in-Charge. Capacity 1,00,000 Ltr.

MAGNUM SAFETY INDIA

SYN DEVELOPERS PVTLTD

ASSOCIATED ELECTRICAL CONST CO. 1963 PVT.LTD