Repair Replacement of internal wiring and fittings and textures at Kandivali Malad Marve Kalina and Juhu Mil Camp Under GE North Mumbai

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down of old DBs with MCB / fuses of any size and rating complete from the position after disconnecting the electrical connection all as specified and as directed.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic PVC casing / capping (not less than 20mm wide) (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 03 here-in-before but for one light / Fan / Exhaust fan / bell point controlled by one, one way switch

All as per item No. 03 here-in-before but for one light point controlled by two, two way switches

All as per item No. 03 here-in-before but for one 3 pin 5/6 Amps switch socket combination point on independent board

All as per item No. 03 here-in-before but for one 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

All as per item No. 3.00 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 3.00 described here - in - before but for 20/25 Amps power unit on independent board with 4sqmm copper cable and provision of 4sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor with 20mm non metallic PVC conduit concealed in wall / ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic PVC conduit 20mm dia (ISI marked) and accessories laid on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 06 here-in-before but for one light / Fan / Exhaust fan / bell point controlled by one, one way switch

All as per item No. 06 here-in-before but for one light point controlled by two, two way switches

All as per item No. 06 here-in-before but for one 3 pin 5/6 Amps switch socket combination point on independent board

All as per item No. 06 here-in-before but for one 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

All as per item No. 6.00 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 6.00 described here - in - before but for 20/25 Amps power unit on independent board with 4.0sqmm copper cable and provision of 4.0sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed by Engineer-in-Charge.

Cutting chases with dust free cutting machine, pinning in making good the disturbed surface of wall / ceiling and pointing in cement mortar 1:3 to cutting chases for concealed conduit wiring, etc., and making good etc of girth not exceeding 10 cm girth all as specified and as directed by Engineer-in-Charge.

Supply and fix 100 watts LED high bay light fitting, 230 volts, 50Hz, AC supply complete with all accessories internally prewired and including electrically connection with cable of size 0.5 Sqmm (nominal area) including hanging arrangments and taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make : Philips Cat part No BY515P LED150S, Syska Cat Part No : UFO-E HI-BAY 100W and Bajaj Cat part No BGHBM 100WLED XE

Supply and fix LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including 02 Nos of PVC square /round boxes , screws clips including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make: Phillips Cat No BNO21C LED20S PSU CW GR S2 or equivalent of Havells cat part No LHEXARP7SN1W020 / Bajaj.

Supply and fix LED tube rod 1x20W, 220V, AC to be fixed in existing tube light fitting with necessary modification of connection including taking down existing light fittings etc complete all as specified and directed by Engineer-in-Charge. Make: Havells Cat part No. LHLDDCXCML8Q020 or equivalent in Bajaj/Phillips

Supply and fix LED light fittings 1 x 13Watts, bulk head luminaries including LED light driver holder connecting up with three core copper flexible wire of suitable size from ceiling rose to fitting with fixing accessories including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make : Havells Cat part No. LHEXCGP7UN5W013 or equivalent in Bajaj/Phillips

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make : Phillips Cat No RC380B LED36S -6500 G4 L60 W60 PSU OD or equivalent of Havells / Crompton Greaves.

Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down existing light fittings etc complete all as specified and directed by Engr-in-charge. Make : Havells Cat No LHEXACP5IN1W010 or equivalent of Philips / Bajaj.

Supply and fix round/Square shape 20/15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat No LHEBLEP5IN1W020 for round and LHEBHEP7IZ1W018 for square or equivalent of Philips / Bajaj

Supply and fix round/Square shape 24 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat No LHEBAEP7IZ1W024 or equivalent of Philips / Crompton Greaves

Supply and fix Switch Piano, flush type, single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix Switch Piano, flush type, single pole, two way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix Switch bell push, flush type, single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / L&T

Supply and fix Call bell electric (Ding Dong type) suitable for working on 230 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / L&T

Supply and fix Ceiling rose, surface type Bakelite, three terminal PVC/polycarbonate isolated body, 65x32mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix switch socket outlet, combination 2 in 1, 5 Pin, 5 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix switch socket outlet, combination 5 in 1, 3 Pin, 5/15 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix stepped type electronic fan regulator on existing phenolic laminated sheet,100W, 230 V etc complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs SPN sheet metal enclosures with two pin and earth plug and socket controlled by MCB SP 20/25Amps, 240volts etc complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Legrand / L&T

Supply and fix Sheet metal enclosure concealed to the wall for 12 way Distribution Boards (DB’s), double door, single pole & neutral with 100 amps rated bus bar, suitable for fixing MCBs/RCBOs all as specified and directed. Make: Havells / Legrand / L&T

Supply and fix in repairs double door, sheet metal enclosure, powder coated concealed to the wall for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 100 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified. Make: Havells / Legrand / L&T

Supply and fix in repairs double door, sheet metal enclosure, powder coated concealed to the wall for MCB DB SPN 4 way fitted with neutral link, earth bar , din rail and 100 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified.

Supply and fix in repairs double door, sheet metal enclosure, powder coated concealed to the wall for MCB DB TPN 4 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 415 volt conforming to IS 13032-1991 complete all as specified.

Supply and fix in repairs single door, sheet metal enclosure powder coated DB VTPN 4 way with 200 Amps rated bus bar, 415 volt, vertical type, IP 43 protection with provision for DPX 125 MCCB as incomer and SP/TP MCB as outgoing, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Make: Havells Cat part No. DHDLVSRWGOFO04 or equivalent Legrand/ CG /Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs MCCBs 125 Amps, 25 KA, 4 pole with adjustable thermal and magnetic settings complete all as specified and as directed by Engineer-in-Charge. Make : Cat Part No 420055 of Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs MCB TPN, 40 Amps to 100 Amps, 415 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs MCB SPN, 6 Amps to 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs MCB SP, 6 Amps to 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Material and labour for submain wiring complete with and including 2 runs of 6.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm dia including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 6.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 6.0sqmm PVC insulated cable and one run of 6.0sqmm cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm dia including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 4.0sqmm PVC insulated cable and one run of 4.0sqmm cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 4 mm dia, 7.5m long, by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate, and protected by 15 mm bore light grade galvanised iron pipe and connected to control board / panel / equipment complete all as shown in electrical plate No.3 of MES schedule Part I with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring with proper colour coding complete with and including PVC insulated unsheathed, flexible bright annealed multi stranded copper conductor single core FRLS cable 1.5 Sqmm (22/0.30) 1100 volt grade confirming to IS 694 drawn through in and including (medium grade) rigid non metallic PVC conduit pipe 25 mm size ISI marked with conduit accessories / fittings / junction box / inspection covers etc of ISI marked and cutting chases for concealed conduit with all surfaces by means of screws and sunk / cup washers, for mounting of switches sockets fan regulators etc including 1.5 sqmm (22/0.30) 1100 volts grade PVC insulated FRLS unsheathed flexible, multi stranded copper conductor cable (green colour) as continuous earthwire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end all as specified and as directed Note : (a) Cutting chases & making good disturbed surfaces will be measured and paid separately. (b) Modular sunken boxes with cover plate will be measured & paid separately

All as per item No. 39 here-in-before but for one light / Fan / Exhaust fan / bell point controlled by one, one way switch

All as per item No. 39 here-in-before but for one 3 pin 5/6 Amps switch socket combination point on independent board

All as per item No. 39 here-in-before but for one 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

All as per item No. 39 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5sqmm copper cable single core and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and fix in repairs Modular metal flush box including white cover plate with frame 1/2 module complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs Modular metal flush box including white cover plate with frame 3 module complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs Modular metal flush box including white cover plate with frame 4 module complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs Modular metal flush box including white cover plate with frame 6 module complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs Modular type fan regulator rotary step deluxe, 240 volt, 50Hz all as specified and as directed by Engineer-in-Charge. Make: Anchor / Leader / L&T / Legrand / Honeywell

Supply and fix in repairs Modular type bell push one module for call bell single pole one way 6 Amps, 240 volt, 50Hz all as specified and as directed by Engineer-in-Charge. Make: Anchor / Leader / L&T / Legrand / Honeywell

Supply and fix in repairs Modular type switch socket outlet combination 2 in 1, 3 Pin, 16 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix in repairs Modular type switch socket outlet combination 2 in 1, 3 Pin, 5 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix in repairs Modular type switch socket outlet combination 2 in 1, 3 Pin, 6 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix in repairs Modular type switch single pole one way 6 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix in repairs Modular type switch single pole one way 16 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix in repairs Modular type switch single pole two way 6 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix angle holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix LED bulb 10Watt retrofit type to fit in lamp holder all as specified and as directed by Engineer-in-Charge. Make : Havells cat part No. LHLDEUEEML8R010 or equivalent in Bajaj/CG/Shakti.

Supply and fix single phase temper proof smart digital electrical meter with transparent box and polycarbonate for electrical meter seals 04 Nos complete all as specified and as directed by Engineer-in-Charge. Make: Anchor/Seesure/L&T / Havells / Legrand /Siemens / Schneider

Supply and fix LED bracket light fitting 12 watts, 230 volts, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, connection with three core copper flexible cable 16/0.20mm from ceiling rose to fitting etc complete all as specified and as directed by Engineer-in-Charge. Make : Havells / Bajaj / CG / Wipro

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 50,094.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

Vishal Builders

joshua construction