Construction of Anganwadi Building at Kolaiyanur in Ulliyakudi Panchayat of T.Palur Block in Ariyalur District under AGAMT II 2024-25

Amount

Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15 cm thick well rammed and consolidate and depositing the surplus earth in all places shown by the departmental officers with initial lead and lift etc., complying with standard specification as per SS 20B.

Supplying and filling in foundation and basement with filling M-sand layers not more than 15 cm thick well rammed watered and not compacted complete complying with standard specification.

Plain Cement Concrete 1:4:8 Using 40 mm HBG metal for basement and flooring layers not more than 15cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification.

Brick work in Cement Mortar 1:5 (one cement and five M-sand ) using Country Bricks ground molded of size 22x11x7 cm. Including cost and conveyance of materials to site and all other labour charges as per standard specification.

Centering shuttering including necessary support for plane surface in Foundation and Basement and in all floors using mild steel sheets of size 90x60 cm and 10 gauge stiffened, welded with steel angles of size 25mmx25mm x3mm for boarding laid over silver oak (country wood) joints of 10cm size x6.5cm size spaced at about 90 cm center to center and supported casuarina props of 10 cm to 13 cm dia spaced at 75 cm center to center complete complying with standard specification.

Supplying and erecting steel centering for column sill slab sunshade etc.,

Supplying fabricating and placing in position mild steel or ribbed steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete complying with standard specification

Reinforced Cement concrete 1:11/2:3 using 20mm, gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc. shall be finished smooth with CM 1:3 12mm thick and with kraft paper without claiming extra etc. as directed by the Departmental officers complete complying with standard specification.

Supply of Steel Door of Size 1.00 x 2.10m

Supply of Steel Door of Size 1.10 x 2.10m

Supply of Steel Door of Size 0.75 x 2.10m

Supply of Steel Window of Size 1.20 x1.30m

Supply of steel Ventilatorof Size 0.60 x 0.45m

Supply of RCC Jolley of Size 0.60 x1.60m

Labour Charges for fixinf of doors in Position

Labour Charges for fixinf of windows in Position

Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) over the RCC roof slab in the proportion being brickjelly to lime 32:12:1/2 by volume and laid over in to a single layer and consolidated to the required design and finished thickness beating type concrete with wooded beaters keeping the surface constantly welted by sprinkling lime jaggery water as per standard specification etc., complete as directed by the departmental officers.

Finishing the top of roof with one course of Machine Pressed Tiles of size 20 cm x 20 cm x 2cm of approved quality laid in CEMENT MORTAR 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide, etc., complete complying with standard specification.

lastering in CEMENT MORTAR 1:3 10mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.

Plastering in CEMENT MORTAR 1:5 12mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing of walls with colour glazed tiles of size 150x150x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete.,

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Painting two coat of Plastic emulsion paint over wall plastering surface with best approved first quality of approved colour over the one coat of priming etc., complete complying with standard specification (The paint should be got approved by the departmental officers before use on works )

Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete

Painting TWO coat of enamal paint new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specification. (The paint should be got approved by the departmental officers before use on works)

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality

Supplying and Fixing inposition of best quality make White glazed wash basin of size 550x 400mm

Supplying & Fixing in position Europeon Water Closet with all fittings and 10 lit capacity flusing tank

Supplying & Fixing in position RCC Ring 900mm Dia

Supplying & Fixing in position RCC Cover slab 900mm Dia

Supplying & Fixing of PVC Tank

Supplying & Fixing Handle Bar

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Wiring with 2x2.5 sq.mm PVC unseathed SC aluminium cable of 650v grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with T.W.Switch box inflush with wall coverd with hylum sheet with pointing pf suitable colour for open PVC light point (SD No .23)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of single box type 40w plug fitting complete with copper choke and condenser with TW Round block on wall or ceiling with tube with PVC unsheated leads to the Terminals to the fittings (TUBE LIGHT) _SD No _87

Wiring with 2x2.25 sq.mm PVC unseathed SC alumimium cable of 650v grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm T/W.S Switch box inflush with wall with 3mm thick hylum sheet cover for 5A pin non- interlocking C.S Plug including Pin Top with continuous earth wire of 14 SWG TC wire for open PVC Plug point (SD No.40)

Supply and fixing of WT Bulk head fitting with guard for inflorescent lamp with guard and 60w bulbs (SD No.84)

Supply and run off 2 of 6sqmm polythene insulated sheated (heavy duty) SC Aluminium cable of 1100v grade on bearer on service connection mains (SD No .66)

Supply and run off 2 of 6sq.mm polythene insulated sheated (heavy duty) SC Aluminiumm cable of 1100v grade insuitable 25mm G.I. Pipe suitable bend at both ends with necessary angle iron upright and end supports for mains (SD. No71) G.I.SERVICE PIPE

Supply and run off 2 of 6sq.mm polythene insulated sheated (heavy duty) SC Aluminiumm cable of 1100v grade insuitable 25mm G.I. Pipe suitable bend at both ends with necessary angle iron upright and end supports for mains aluminium armoures cable with earth connection- EARTH STAND

Towards the cost and supply of PVC Specials including all labour charges etc

90mm PVC Finolex pipe (6KG/cm2)

20mmUPVC Finolex pipe (6Kg/cm2)

20mm PVC Elbow

20mm PVC Tee

20mm PVC Tap

Provision for Corton Charges

Provision for string Bandal

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for this work}

Krishna and Co