WBHD/EE/ED-1/eNIT-38/2024-25

Amount

SUB-HEAD 1--Distribution Wiring: Disconnecting & dismantling existing damaged & unservicecable electrical installation with owns tools & takles incl. Mending good damages as per GS and clearing/removing from the site.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] [Each Flat 18 nos] Average run 6 Mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish [Each Flat 4 nos] On Board

SUB-HEAD 2-- PLUGS & SOCKETS: Supplying & Fixing 2 Nos. 6 A Piano Key Type Switch and 2 Nos. 6 A Piano Key Type Plug Socket on CRC sheet metal (16 SWG) JB-cum-Switch Board of 175 mm x 100 mm x 65 mm complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works [Each Flat 3 nos]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [Each Flat 2 nos]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [Each Flat 3 nos]

Supply & Fixing 240 V, 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (For Geyser) [Each Flat 1 nos]

Supplying & Fixing 1 Nos. 240 V, 16/20 A Piano Key Type Plug Socket on sheet metal inspection box (16 SWG) of 100 mm x 100 mm x 65 mm flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works including Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required (For Geyser) [Each Flat 1 nos]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [Each Flat 2 nos]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [Each Flat 2 nos]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [Each Flat 3 nos]

SUB-HEAD 3--BDB,PDB,VTPN ETC: Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [Make: Legrand/ABB/SIEMENS/Schneider/L&T] 2+12 way [Each Flat 1 nos]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. 2 way [Each Flat 1 nos]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. [Make: Legrand/ABB/SIEMENS/Schneider/L&T] 40 A DP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make: Legrand/ABB/SIEMENS/Schneider/L&T] 6-32 A SP MCB

40 A DP MCB

SUB-HEAD 4-- Polythene pipe and wires: Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS. [Make- Havells/Finolex/Polycab/RR Kabel/KEI] 3 x 22/0.3 (1.5 sqmm) (SPMCB to Separate 6 A Plug) [Each Flat 29 mtr.]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC (SPMCB to Separate 16/20 A Plug) [Each Flat 40 mtr.]

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC (SPMCB to AC & Geyser) [Each Flat 30 mtr.]

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (E/Mtr. To DPMCB and DPMCB to SPNDB incomer)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 1.5 sqmm

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. 19 mm dia 3 mm thick polythene pipe without earth continuity wire

SUB-HEAD 5 --MISCELLANEOUS: Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board [Each Flat 1 nos]

Add. GST.@ 18% to be calculated (on total from item no 1 to 19) by bidder

Add. LWC.@ 1% to be calculated (on total from item no 1 to 19 + GST@18%) by bidder

M/S. GOPAL ELECTRICALS (BID ID -6185295)

MAHALAXMI ELECTRICALS (BID ID -6185347)

Bidder Name

SARKAR ENTERPRISE