Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.5 L
Closing Date
1 Mar 2021, 3:00 pmClosed
Executive Engineer
Executive Engineer, CD, APWD, Diglipur
Construction Rain water harvesting structure of 5000 Liters capacity at GPS Paschimsagar-II under CD, APWD, Diglipur
2021_APWD_2434_1
NIT No. 71/EE/CD/APWD/DP/2020-21
Open Tender
Civil Works - Others
Works
60 days
Paschimsagar-II, Diglipur
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Executive Engineer, CD, APWD, Diglipur
Exempted
2 Mar 2021
19 Feb 2021
1 Mar 2021
19 Feb 2021
1 Mar 2021
22 Feb 2021
19 Feb 2021 - 22 Feb 2021
Amount
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.
0.80 mm thick with zinc coating not less than 275 gm/m²
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. :
150 mm diameter
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Circular tank
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL
40 mm nominal outer dia Pipes
Making RCC framed staging with slab for placing water storage tank at a height of 1.5 mtr and 3mx3m platform etc complete as per the direction of EIC.
Ready made filtration unit as per the direction of EIC
Chlorination tank as per the direction of EIC.
bhanwarsingh
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .