Road safety work on ODR roads in Vidhan Sabha Babina in Jhansi district

Center line & Edge line- Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glas s beads @ 250 gms per sqmarea. Thickeness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level uniform and free from streak and holes.For Center Line/Edge Line. (as per lucknow SOR-Ch-26, SI-2)

Cat Eye- Supply and fixing of every dennison / 3 M brand RPM series 290 (CAT Eye) (RED/YELLOW COLOUR) made of polycarbonate with electronic welded prismatic retro reflective lens on both side for maximum retro reflection in wet and dry condition with bitumen adhesive BT 69. (as per lucknow SOR-Ch-26, SI-5-shank)

Delineators- Providing and fixing retroreflective delinator post IZ-ASTMAD- 456-04 made of 75mm dia round pipe of 1-20 mtr. Height with fixing support of flat iron 25x25 mm retroreflective strip 4 no fixed round side of the post electric welded and coveres with jali and painted with black paint including GST and all other taxes and cartage etc. complete with fixing at site as per direction of E/I Two at Four Point (as per lucknow SOR-Ch-26, SI-1)

TRAFFIC SIGNS - informatory board (0.90Sqm)- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. the retro reflective sheeting shall be tasted for a certificate of having the sheeting tasted for coefficient of retro reflective , day time color and luminance, shrinkage, flexibliety , linor removel , adhesion , impact ressistant, spceler glosh and fungus ressistant, 3 years outdoor wathering and its having passed this test shall be obtained form international/ goverment labouratry/ instittute by the manufracturer of the sheeting and in case the cerrtificate is obtained from international conditions, its should also be obtained form indian condion within 3 years of lauching of product bye the manufracture in abroad alternatonaly a cerficate confirming to ASTM specifcations (D-4956-09) on artificial acclrated whathering requirement for a reputad laborlattory in india can be accpted provsionaly. in such a situation, the employer/ Clinte, if so desires could seek a for perfomance garntee which would be released after reciept of cerficate meeting the requarement for 3 year outdoor whathering of the sheeting as per IRC-67-2012. legands, latters, numlers and borders etc should be as per MORTH specefication number 801-3-7. prove of the same inform of govement report shall be uploaded while coating tender.(as per lucknow SOR-Ch-26, SI-18-VII)

TRAFFIC SIGNS - Caution Board (up to 0.90Sqm)- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. the retro reflective sheeting shall be tasted for a certificate of having the sheeting tasted for coefficient of retro reflective , day time color and luminance, shrinkage, flexibliety , linor removel , adhesion , impact ressistant, spceler glosh and fungus ressistant, 3 years outdoor wathering and its having passed this test shall be obtained form international/ goverment labouratry/ instittute by the manufracturer of the sheeting and in case the cerrtificate is obtained from international conditions, its should also be obtained form indian condion within 3 years of lauching of product bye the manufracture in abroad alternatonaly a cerficate confirming to ASTM specifcations (D-4956-09) on artificial acclrated whathering requirement for a reputad laborlattory in india can be accpted provsionaly. in such a situation, the employer/ Clinte, if so desires could seek a for perfomance garntee which would be released after reciept of cerficate meeting the requarement for 3 year outdoor whathering of the sheeting as per IRC-67-2012. legands, latters, numlers and borders etc should be as per MORTH specefication number 801-3-7. prove of the same inform of govement report shall be uploaded while coating tender.(as per lucknow SOR-Ch-26, SI-18-VII)

TRAFFIC SIGNS - STOP (0.90 cm high octagon)- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. the retro reflective sheeting shall be tasted for a certificate of having the sheeting tasted for coefficient of retro reflective , day time color and luminance, shrinkage, flexibliety , linor removel , adhesion , impact ressistant, spceler glosh and fungus ressistant, 3 years outdoor wathering and its having passed this test shall be obtained form international/ goverment labouratry/ instittute by the manufracturer of the sheeting and in case the cerrtificate is obtained from international conditions, its should also be obtained form indian condion within 3 years of lauching of product bye the manufracture in abroad alternatonaly a cerficate confirming to ASTM specifcations (D-4956-09) on artificial acclrated whathering requirement for a reputad laborlattory in india can be accpted provsionaly. in such a situation, the employer/ Clinte, if so desires could seek a for perfomance garntee which would be released after reciept of cerficate meeting the requarement for 3 year outdoor whathering of the sheeting as per IRC-67-2012. legands, latters, numlers and borders etc should be as per MORTH specefication number 801-3-7. prove of the same inform of govement report shall be uploaded while coating tender.(as per lucknow SOR-Ch-26, SI-18-VII)

TRAFFIC SIGNS - Single Chevron (Single) (size-50x60 cm)- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing. the retro reflective sheeting shall be tasted for a certificate of having the sheeting tasted for coefficient of retro reflective , day time color and luminance, shrinkage, flexibliety , linor removel , adhesion , impact ressistant, spceler glosh and fungus ressistant, 3 years outdoor wathering and its having passed this test shall be obtained form international/ goverment labouratry/ instittute by the manufracturer of the sheeting and in case the cerrtificate is obtained from international conditions, its should also be obtained form indian condion within 3 years of lauching of product bye the manufracture in abroad alternatonaly a cerficate confirming to ASTM specifcations (D-4956-09) on artificial acclrated whathering requirement for a reputad laborlattory in india can be accpted provsionaly. in such a situation, the employer/ Clinte, if so desires could seek a for perfomance garntee which would be released after reciept of cerficate meeting the requarement for 3 year outdoor whathering of the sheeting as per IRC-67-2012. legands, latters, numlers and borders etc should be as per MORTH specefication number 801-3-7. prove of the same inform of govement report shall be uploaded while coating tender.(as per lucknow SOR-Ch-26, SI-18-x)

Repetitive bar/ Transvers bar- Providing and laying hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @500 gms per sqm area, Thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015 the finiesed surface to the level uniform and free from streaks and holes ..(as per lucknow SOR-Ch-26, SI-3)