COMPREHENSIVE REPAIRS TO CIVIL WORKS OF C-4 BLOCK AT GHATKOPAR UNDER GE NORTH MUMBAI

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge

Demolition cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), including tiles etc complete all as specified and as directed.

Material and labour for Anti Termite Treatment to the top surface of filled earth at the rate of 5 litres of diluted emulsion per square metre of surface complete all as specified and as directed by Engineer-in-charge

Material and labour for Anti Termite Treatment to the soil along with internal / external perimeter of wall at the rate of 2.25 litre of diluted emulsion per metre of the perimeter wall complete all as specified and directed by Engineer-in-charge.

Material and labour for hardcore broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface at transformer yard complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of flooring / hard standing path and finishing the surface even and fair etc complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floor, finishing the surface with even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters exceeding 1.0 sqm but not exceeding 2.0 sqm each etc complete all as specified and as directed by Engineer-in-Charge.

Taking down of chowkats or frames not exceeding 1.5sqm each with shutters (with out taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge.

Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4.0Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 35mm thick factory made plain framed panelled shutter 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 35mm thick 2nd class hard wood glazed and skelton shutter, open rebated prepared to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.22 (a) complete all as specified and as directed by Engr-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 174 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 140mm size, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix stainless steel butt hinges, medium weight, 125mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix 15 micron coloured aluminium sections for sliding (3 Track) or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 of size 7 x 4.5mm thick, fixed with channel of size 38mm x 12mm x 1.3mm, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILL of Associated group or equivalent make as approved by GE

Supply and fix in repairs 4.8mm thick black sheet glass, ordinary quality fixing with oil putty and glazing clip, in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Hindustan Pilkington Glass works / Saint Gobin / Modi Float / Modiguard

Supply and fix 4mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Hindustan Pilkington Glass works / Saint Gobin / Modi Float / Modiguard

Supply and fix aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised curtain rails 25 mm dia including brackets, stops, rollers etc complete all as specified and as directed by Engineer-in-charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engr-in-Charge.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / RAK tiles / Swastik Tiles

Material and labour for joint free, coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm , on vertical surfaces etc., set and jointed in neat cement slurry and pointed in coloured cement to match over & including cement plaster 10mm thick in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s RAK tiles

Material and labour for glazed coloured ceramic tiles 600 x 600 x 7 to 8mm thick as in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 20mm thick in CM (1:6) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / RAK tiles / Swastik Tiles

All as per item No 32 described here-in-before but as in skirtings, dado and risers on vertical surfaces including 15mm thick backing coat in cement mortar 1:4 etc complete

Dismantling of stone slab and tiles of any description or thickness in floor apron and vertical surfaces laid bedded, joint and pointed in mortar removing of debris outside MD land complete all as specified and as directed by Engr-in-Charge.

Material and labour for granite (mushroom granite) slab, 20mm thick, machine cut, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including necessary moulding of edges as required at site including grinding and polishing over and including 15mm thick cement mortar (1:4) complete all as specified and as directed.

Material and labour for 18 to 20mm thick machine cut, machine polished green marble slab as in jambs/cills of windows jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone including 15mm thick backing coat in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls including ceilings etc., including racking out joints, hacking for key scrubbing down with water etc and removing debris outside MD land complete all as directed by Engineer-in-Charge.

Material and labour for 10mm thick rendering with cement mortar 1:6 on brick wall surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Material and labour for 5mm thick rendering with cement mortar 1:3 on internal ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Material and labour for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer etc complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of newly plastered ceiling surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer etc complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimer paints/ Dulux

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer with all necessary staging, scaffolding etc as required complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints / Berger paints / Shalimar paints / Dulux

Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimer paints/ Dulux

Material and labour for preparation of old plastered or unplastered decorated ceiling surfaces and applying one coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment and applying two coats of distemper oil emulsion including preparation complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for applying 1.5mm thick wall care putty over wall / ceiling surfaces complete all as specified and directed by Engineer-in-Charge. Make : Birla cement/JK white/ Golden Mohar

Supply and fix in repairs, 10 litre capacity, PVC flushing cistern, white, symphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, CI brackets etc complete all as specified and as directed by Engineer-in-Charge. Make : M/s Hindustan Sanitary Ware / Parryware / Commander / CERA / M/s Johnson Peddar

Supply and fix in repairs vitreous china wash hand basin white flat back size 580 x 450 mm excluding taps, waste chain and plug and porcelain stopper but including CI brackets, cutting for and pinning in ends of brackets or erecting stand including 32mm bore discharge pipe with waste coupling of PTMT etc complete all as specified and as directed. Make : M/s Hindustan Sanitary Ware / Parryware / Neyveli Ceramics (Neycer) / CERA / Hindware

Supply and fix in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan head, chromium plated screwed down high pressure, with long screwed shanks and fly nuts, screwed for 15mm iron pipe all as specified and as directed. Make :Soma / Leader / Zoloto / Jaquar (Essco)

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, long body with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. Make :Soma / Leader / Zoloto / Jaquar (Essco)

Supply and fix in repairs concealed type stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Soma/Leader/Zoloto/Prayag/Jaquar (Essco)

Supply and fix in repairs UPVC floor trap 110mm outer dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, UPVC Nahani trap,100mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge.

Material and labour in repairs for 15mm thick rendering in cement mortar 1:3 mixed with water proofing compound on sunken floor including vertical surfaces upto 450mm height and using & applying a coat of Raincoat solution of make Dr Fixit or equivalent with uniform surfaces and supply and fix vitreous china squatting pan Orissa pattern pan of size 580 x 440mm white with integral foot rest 'P' trap, and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern) and connecting piece of CI pipe as per required upto T/Y joint including filling PCC 1:4:8 type D2 and over 40mm thick PCC 1:2:4, type B0 for floor laid with uniform surfaces of wall for area of toilet not exceeding 2.0 Sqm a all as specified and as directed. Make of IWC : M/s Hindustan Sanitary Ware / Parryware / Jaquar / CERA / M/s Johnson Peddar

Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm), including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe 915mm x 460mm and bowl size 410mm x 330mm x 160mm etc, complete all as specified and as directed by Engineer-in-Charge. Make : Diamond / Nirali / Neelkant

Supply and fix Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix brass chromium plated 125mm Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 15mm dia steel water tubing medium grade, galvanised iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge Make: Tata / Jindal / Surya Prakash / Zenith

All as per item No 60 described here-in-before but 20mm dia

All as per item No 60 described here-in-before but 25mm dia

Supply and fix 32mm bore low density polyethylene pipes(LDPE) of pressure rating 6 kg/ cm2 laid in trenches or in floors complete all as specified and as directed by Engr-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 750 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position including taking down existing unserviceable PVC water tank complete all as specified and as directed by Engr-in-Charge. Make: Sintex / Infra / Ashish Plast / Yash Engineering Works, Pune / Plasto

Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 15 mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make :Prayag or equivalent as approved by GE.

Supply and fix in repairs 25mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipes & fixed etc complete all as specified and as directed by Engineer-in-Charge for following sizes: Make: Kirloskar / Zoloto / Kartar / Upadhaya / Leader / BIR

Material and labour for surface preparation of existing concrete components including griding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists. Cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and lift and clean water thoroughly complete all as specified and directed by Engr-in-Charge.

Material and labour mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work

All as per item No. 68 described here-in-before but upto 8mm dia TMT bars as in stirrups and spacers Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work

Demolition of reinforced cement concrete of any description in any position including necessary scaffolding arrangement (reinforcement cut as required to facitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. Note : Reinforcement obtained from this item shall be handed over to contractor on account of sch of credit

Supply and fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour and but excludes the materials for grouting the pins.etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for repairing of excessively damaged concrete portion by using superfluid dual shrinkage compacted and providing, casting with micro concrete of grade M-40 at all levels with all leads and lift as directed including mixing, laying, levelling, finishing including curing complete all as specified and directed by Engineer-in-Charge. Note: (i) Grade of Micro-concrete to be M 40 at 28 days and shall be sourced from manufacturer's such as Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved (ii) Necessary formwork will be measured and paid separately.

Material and labour for reinforced cement concrete 1:11/2:3, type A-1using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and shelves etc complete all as specified and directed. Note: Necessary reinforcement and formwork will be measured and paid separately.

Material and labour for formwork to slab using steel shutters or 12mm marine ply to have the form finish including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing and applying rust cleaner (Re-backler solution) to exposed corroded reinforcement @ 0.20 Litre/Sq or approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiselling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc. complete as directed by Engineer-In-Charge.

Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB or equivalent of approved make and quality comprises of resin and hardener mixed in equal proportion by volume with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. NOTE: (a) New Reinforcement shall be measured and paid separately under respective item (b) Cost of welding deemed to be inclusive in this item of work.

Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforms to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing Base and curing agent in 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer. Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge

Material and labour Drilling and fixing teflon nozzles in RCC members, including drilling holes (drilling 12 mm dia, 40mm deep holes in structural members at the intervals of 600mm c/c in staggered manner or s directed by Engineer-in Charge in RCC structure elements and cleaning the holes (to clean the holes by air blower prior to fixing nozzles) and fixing of nozzles (to insert 12mm dia teflon nozzles in cleaned holes external end of nozzles (to insert 12mm dia teflon nozzles in cleaned holes external end of nozzles to be machined to receive outlet of grouting gun and fixing it inside the holes by applying thixotropic epoxy putty to ensure complete sealing and curing the system for minimum 12 hrs) and cutting of nozzles (to cut the nozzle by chisel after completion of grouting without damaging structural elements etc complete all as specified and as directed by Engineer-in-Charge.

Injecting low viscosity (3-5 cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories, till nozzles refuses to accept the grout, Including, Mixing of materials( Mixing material components (part a & b) in required quantities as per manufacturer’s instruction by weigh batching) and Grouting ( Filling the grouting gun with monomer. Maintain desired pressure in the gun by air compressor; maintain the pressure at exit (4 to 5 Kg/ Cm2) by monitoring pressure gauge at exit. Grouting the material through prefixed nozzles in the structural elements till its refusal. Sealing the nozzle with epoxy putty after the refusal. Monitoring leakages through other nozzles while grouting and seal them as per the requirement. Repeat the process for all the nozzles. the operation to be within pot life of the material.)and Cleaning of gun and accessories (the gun and accessories like valves, pipes and other fixtures to be cleaned with thinner after the operation to avoid jamming of the gun.) etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTER over identified R.C.C. members in One layer in proportion of 1:5:15 by weight of polymer of approved make, cement and filler material of approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Strengthening structural elements with non metallic composite fiber wrapping system comprise of uni-directional carbon fiber sheet (430 GSM) and compatible saturant Profiling, applying compatible primer on prepared substrate, Filling the holes and uneven surface with thixotropic epoxy putty etc., complete mechanized wetting of fiber sheet, cutting the fabric to required size, mixing of saturant and filling in tub area of the saturation machine, placing the fiber on metallic rods and pass through the rollers of machine and saturant tub ensuring complete wetting (65% fiber volume fraction) of fibers, removing the fiber on rod and placing the new fiber sheet, wrapping the fiber sheet to structural element at desired orientation using tamping roller to avoid any air voids etc., repeating the same procedure for multiple layer with the interval of 8 hrs ,applying second coat of saturant after minimum 12 hrs after first coat, rectify air voids if any and finally rendering with10mm thick in CM 1:6 including finishing even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Mode of measurement- Per sq.mt of surface area of carbon fiber sheet without lapping. Make- FOSROC/FIXIT/Krishna Conchem/ Sika

Providing and fixing carbon fiber anchor including drilling hole in the base concrete, fixing the anchor using epoxy 50X55 system, spreading the anchor fibers in star pattern including application of saturant complete all as specified and as directed by Engineer-in-Charge. Note for Item Nos.67 to 82:- (i) The work under Item Nos. 67 to 82 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfilment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority.

Taking down carefully old unsv aluminium/copper point wiring (light, fan,socket or power) complete incl fittings such as switches, ceiling roses, pendants, regulators, socket outlet, bulk head fittings, tube light fittings,MCBs, DBs etc and making good the disturbed surface complete all as specified and as directed.

M & L for point wiring with 1.5 sqmm FRLS grade PVC insulated cable 1100 volts grade as per IS-694 stranded copper conductor cable drawn through and including in PVC conduite concealed complete with all fittings and acessories and 1.5 sq mm stranded copper conductor cable FRLS grade PVC insulated for earth continuity all as specified and directed for one light /Ceiling Fan/Exhaust fan Point controlled by one Switch, includng cutting chases on wall/floor etc. making good the disturbed surfaces of wall complete all as directed. Fabricated terminal box made out of PVC, with 3mm thick PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan, regulators etc, all as specified and as directed for the following :- Make: Paragon/ Finolex / Plaza / Polycab / Kalinga / Vinay For PVC Conduit Make: Avon/ Supreme/Precision/Prince/Finolex/Prestoplast

(a) One light point /Fan ponit/Exhaust fan point/Ceiling Fitting controlled by one way switch

(b) One switch socket outlet point 5A on indepndent board.

(c) One 5 amps socket point on same board controlled by another switch.

(d) One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm.size all as directed.

All as per item No 84 here-in-before but for point wiring with 2.5 Sq mm single core stranded copper conductor and one run of 2.5 Sqmm copper conductor, stranded for earth wire for one switch socket out let point, 15/16 amps on the independent board.

Supply and fix switch piano flush type single pole, one way 5 Amps (ISI marked) complete all as specified and directed. Make : Anchor/Crabtree/Leader/Legrand/ Havells

Supply and fix bell push flush type 5 Amps, 240 volts, one way, white colour conforming to IS and complete all as specified and directed. Make : Anchor/Crabtree/Leader/Legrand/ Havells

Supply and fix bell/ding dong AC 230 Volts, AC, single pole conforming to relevant IS complete all as specified and directed. Make : Anchor/Crabtree/Leader/Legrand/ Havells

Supply and fix celling rose, 3 phase/PVC/polycarbonate isolated body ISI(marked) complete all as specified and directed. Make : Anchor/Crabtree/Leader/Legrand/ Havells

Supply and fix switch socket combination 5 Pin, 5 Amp flush type ISI(marked) complete all as specified and directed. Make : Anchor/Crabtree/Leader/Legrand/ Havells

Supply and fix switch socket combination 5 in 1, 3 Pin, 5A & 15A, flush type universal, 240 V, all as per relevant IS complete all as specified and directed. Make : Anchor/Crabtree/Leader/Legrand/ Havells

Supply and fix ceiling fan regulator AC, 230 volts electronic step type complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/Crabtree/Leader/Legrand/ Havells

Supply and fix angle holder, PVC/Polycarbonate with back plate suitable for batten/angular fitting, complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/Crabtree/Leader/Legrand/ Havells

Supply and fix LED tube light fitting, batten type 1x 20 watts, 230 volt, 4 feet with long losting pvc body with slim & sleek looks all pre-wired fixed on walls with all fixing accessories such as 2 nos of pvc square/round boxes, screws, clips etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make: Havells Cat part No. LHEXBLP7PN1W020 or equivalent in Bajaj/Shakti/CG/Philips

Supply and fix surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver of 2 feet 09 watts with necessary electrical wiring complete and connections with 3 core flexible copper cable of size 24/.20 sqmm all as specified and as directed. Make: Havells Cat part No. LHEXBLP7IN1W009 or equivalent in Bajaj/Shakti/CG/Philips

Supply and fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-charge. Make: Usha/Bajaj/Crompton/Havells

RAJU ENTERPRISES

Vishal Builders

industrial suppliers

M/S Sun Enterprises

LUCKY DECOR

joshua construction

Anjali Constructions

Parmatma Enterprises

M/S Kumar Enterprises

S.N Enterprises