Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.1 LAccepted-AOC HIMALAYA COMPLEX MAIN BAZAR LEH LADAKH 194101 J K | LEH | LEH | JAMMU AND KASHMIR | 194101 | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L2₹11.6 L+₹52,105.30 (4.68%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L2 | Rejected-Finance Higher side quoted amount | |
| 3 | L3₹12.3 L+₹1.2 L (10.9%)Rejected-Finance BETONG SHOP KHANGSAR COMPLEX NOWSHARA LEH LADAKH 194101 J K | LEH | LEH | JAMMU AND KASHMIR | 194101 | L3 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹28,000
Closing Date
29 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
HQ CWE Khumbathang PIN-900270 C/o 56 APO
SPECIAL REPAIR TO DEPOT ROAD AT LAMAYURU UNDER GE KHUMBATHANG
2024_MES_648717_1
80051/110/E8
Open Tender
Civil Works
Item Rate
180 days
GE Khumbathang
Class E Cat a (I)
8 documents required · 8 mandatory
₹500
G E Khumbathang
₹28,000
Yes
14 May 2024
30 Mar 2024
1 May 2024
30 Mar 2024
29 Apr 2024
15 Apr 2024
Amount
Repair to pot holes any depth not exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, path etc including cutting around edges to atleast 25mm in depth and making good by applying tack coat using paving bitumen VG-10 @ 5 kg per 10 sq m. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30mm and directed by Engineer-in-charge.
Applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 10 Kg per 10 Sqm, complete all as specified and directed by Engineer-in-charge.
Premixed bituminious macadam with 4% of binder content by weight of total mix using paving bitumen VG-10 laid with self propelling mechanical paver, rolled & compacted with roller of 8 to 12 ton to required gradient and cabmer ( consolidated thickness upto maximum 75 mm) to make good the cut edges of roads etc complete all as specified and directed by Engineer-in-charge.
Preparaing existing black top surafce by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surafces with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with bituminous primer using paving bitumen VG-10 @ 5Kg/10 Sqm complete all as apecified and as directed by Eng-in-charge.
Bituminous premixed asphaltic dense concrete 40mm consolidated thickness with 6% binder content using paving bitumen VG 10 by weight of total mix laid with self propelling mechanical paver, rolled and compacted with roller of 8 to 12 ton to required camber and gradient with power roller complete all as specified and directed by Engineer-in-charge. Note :- As a result of job mix formula, if quantity of binder content works out to be more than 6% than no extra payment shall be made to the contractor and in case its quantity works out be less than 6% than minimum binder content of 6% given herein above shall be provided.
Preparation of new / old road surfaces and applying reflective thermoplastic road marking paint (White or golden yellow) of minimum 2.50 mm thick (conforming to BIS-3262), single coat as in centre line, stop lines, dashes, arrow etc and the like road marking of not exc 10 cm wide using 'HOT MARK' by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter filler as specified in table 803.4 of MORTH specification, thermoplastic requirement for glass beads shall be as specified in (intermix) type-I, MOST/BS 6088A and road marking shall done as per provisions contained in IRC-35-1997, complete all as specified and directed by Engineer-in-Charge.
M/S RW INFRA
M/s Siachen Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .