CONSTRUCTION OF STORM DRAIN AND SEWAGE PIPE LINE AROUND FCE, WB-60 AND WB-61 AT MCTE MHOW UNDER GE (MCTE) MHOW

Amount

Item No.1 M&L for excavating in trenches, not exc1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out, in hard /dense soil, complete all as specified.

Item No.2 M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in floors, foundations, filling & mass concrete, complete all as specified and directed.

Item No.3 M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching including necessary form work complete all as specified and directed.

Item No.4 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including form, moulds, mitred/ stopped ends etc complete all as specified & directed.

Item No.5 M&L for brickwork in CM 1:6 with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, complete all as specified.

Item No.6 M&L for cement concrete 1:3:6 type C-1, (using 20mm graded stone aggregate) as in coping, cills, steps, fixing hold fast/ lugs, bed plates, kerbs, water troughs and the like, including necessary form work and finishing the exposed surface of concrete, weathering, slightly rounded or chamferred angles and throating, complete all as specified and directed.

Item No.7 M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.

Item No.8 Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in hard/ dense soil. complete all as specified.

Item No.9 Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified

Item No.10 Removing excavated material exc 250 m but n. exc. 500m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified

Item No.11 M&L for Precast RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in man holes cover slab, set in CM 1:4, complete.

Item No.12 M&L for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire not less than 0.9mm dia, complete all as specified.

Item No.13 M&L for Mild steel TMT bars 10mm dia and over, for reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

Item No.14 S&F rolled mild steel conforming to Fe 290 (Gde-E-165) for framed work such as grills, gratings,gate etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings, framework of water tanks and similar work, complete all as specified.

Item No.15 M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 450mm dia pipe complete all as specified.

Item No.16 M&L for & directed 450mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Item No.17 M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200mm dia pipe complete all as specified.

Item No.18 M&L for & directed 200mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.

Item No.19 M&L for Reinforced cement concrete (nominal mix),1:2:4, type B-1 using 20mm graded stone aggregate as in slab, shelves etc.all as specified.

Item No.20 Use & waste of Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified.

Item No.21 Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 200mm bore drain pipe, complete all as specified.

SANJAY ENTERPRISES

RK CONSTRUCTION

M/S UnitedConstruction

Jamna Constructions