Supply of Furniture in SAWB Pashudhan Bhawan Under Sub Dn. Gandhi Nagar IV, Jaipur. (SANCTION WORK)

Amount

CENTRETABLE Size : 1200 x 600 x 450mm (L x W x H) Table top: Table top made out with 25mm thick MDF board with 0.3mm thick membrane foil with glass 8mm thick finish. The whole table is supported on two leg of and equal size which are made out of 18mm thick MDF board laminated with laminate sheet in all four vertical edges and flat edge duly sealed with 1.5mm thick PVC edge banding of matching color.

Supply of Executive Table with Pedestal and Side Unit. SIZE : 1500 X 750 X 750mm | L X W X H) Executive Table Top:The table top of size 1500 x 750 mm should made out of 36mm (18mm+18mm)thick prelaminatd particale board sealed with 1.5 mm pvc edgebending on all around the edges of matching color, Legs made of 18mm thick prelaminated particale board with four side edge banding. The front and rear side and the rest of the sides should be edge banded with 1mm thick PVC Edgebanding.

The table shall also have pvc studs under the legs of table SIDE UNIT:- 900 X 450 X 750mm (LXWXH) :- Side unit: The structure to be made out with 18mm thick prelaminated board with 1mm thick PVC edge bending all around of matching color There should be a 50mm skirting provided in the bottom area.

The top of the unit to be made of 18mm thick prelaminated board and the front edge and rest of the sides shall be edge banded with 1mm thick PVC Edge Banding of matching color. The unit to be duly fixed with 2 nos. of shutters having 1 no. horizontal shevle made of 18mm thick prelaminated particale board of maching colour. Pedestal unit, size - 450mm x450mm x 710 mm

The pedestal unit made of 18mm thick prelaminated particale board with 1mm thick edgebanding allround edges of matching colour. Unit shall have 3 number of drawers running on telescopic channel with required locking system and handles. Complete in all respect, as approved by engineer in charge

Supply of visitor fix type chair, chair base made of 25mm dia SS crome finish single pipe having studs. Seat of the chair shall be made of 12mm thick hot pressed ply coverd The cushioned seat assembly shall consists of insert moulded polyurethane foam upholsted with foam laminated mesh fabric the insert moulded

foam is assembled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly, The arm set shall be fixed with the seat and back. As per design and sample approved by engineer in charge.

Supply of Executive high back chair , the cushioned seat assembly shall consist of inert moulded polyurethane with foam laminated mesh fabric the inert moulded foam is assembled over a load bearing plastic seat cover.The back shall made up of two piece injection moulded frame.

The inner frame shall be upholstered with mesh fabric and mounted on main assembly. The arm set shall be injection moulded with height adjustable upto 4.5 +/- 0.5 cm in three steps and with adjustable upto 20 cm .The neck rest assembly shall be made up of polyuurethane foam upholstered with foam laminated mesh fabric.

The neck rest assembly is mounted on top of back.The chair shall have height adjustable system. Chair shall have steel chrome base with 5 no. of wheels and also have back adjustable cushioned lumber support. complete in all respect as per design approved by Engineer-in-Charge.

Modular workstation of size: 1140W X 600D X 1200H (mm), 54 Thick Alluminium panel based, Double raceways, Pinboard and white board, Mobile 3 drawer pedestal with centre lock, 25mm thick post form table top in MDF including PVC Wire Manager, Key board trey and CPU trolly.a) Workstation :

Modular Workstations of 54 mm thickness with extruded aluminum end post of size 54x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. Top trim is of aluminum section of size 54x12mm and snap fitted on its base of size 54x20mm.

The aluminum frame work is supported on lower and upper partition block. Bottom Block is made up of 9mm prelaminated particle board of desired shade which is pasted On 33x25mm thick particle board baton frame, which is properly screwed to end post and Bottom electrical race way. Upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade,

Optionally White Board or Glazing can Be provided instead of pin board. Raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. Second below the Top, The raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. The modular switch and socket plates can be mounted and punched onto the raceway panels with easy cable connectivity and accessibility in case of any repairs etc.

Top rails, end posts, connectors and raceway panels are made out of aluminum duly powder coated after 7 tank anti-rust phosphate treatment. All horizontal Top rail and vertical end post profiles would be elegantly curved in a convex fashion with a lengthwise running groove in the middle. All End caps and joinery caps should be in high strength Aluminum Die Casting and powder coated to Exactly match the section powder coated color.

Bidder Name

Amount

Rashmi Enterprises(GSTN-08AAEFR3518G1ZA)

M/S JAIPUR CRAFT AND ART(GSTN-08AYMPA1844L1Z9)

Rashmi Enterprises

M/S JAIPUR CRAFT AND ART