Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance 506 5TH FLOOR GRANDE EDIFICE AKURLI ROAD OFF W E HIGHWAY KANDIVALI EAST 400101 MUMBAI MAHARASHTRA 400101 INDIA UDYAM MH 18 0005535 27AAGFE2360M1ZA R M MII STATUS AS VERIFIED | MUMBAI SUBURBAN | MAHARASHTRA | 400101 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance 267 SG HOUSE URAN PANVEL RD BOKADVIRA RAIGAD MAHARASHTRA 400702 | RAIGAD | MAHARASHTRA | 400702 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
Closing Date
19 Jun 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Dy. Manager PPD
Admin Building, JNPA, Sheva, Navi Mumbai
Budgetary Quotation for Construction of Passenger Ferry Terminal Building at Landing Jetty and Development of Surrounding Area at JN Port
2023_JNPT_756656_1
JNP/PPD/DGM-I/Ferry Terminal Building/2023
Open Tender
Civil Works - Buildings
Item Rate
540 days
Jawaharlal Nehru Port Authority
Please refer Tender documents.
1 document required · 1 mandatory
₹0
Exempted
20 Jun 2023
7 Jun 2023
20 Jun 2023
7 Jun 2023
19 Jun 2023
7 Jun 2023
Amount
PART A - FIRE FIGHTING WORK
PUMP ROOM EQUIPMENT
SITC of Electric Motor driven Fire Pump set of 1650 LPM @70 m head with a) pump with bronze impeller, b) motor, c) coupling, d) base plate, e) foundation bolts matching flanges with gasket and fasteners with all complete as directed by EIC.
SITC of Diesel Engine driven Fire Pump set, of 1650 LPM @70 mtr head with a) pump with bronze impeller, b) engine, c) base plate, d) coupling with coupling guard, e) foundation bolts, f) automatic air release valve, g) fuel tank with engine exhaust line silencer, h) mating flanges with gasket and fasteners, i) battery with battery charger including 100% standby, j) fuel filters along with fuel tanks as directed by EIC.
SITC of Electric Motor drive Jockey fire pump set of 180 LPM @70 mtrs head with a) pump with bronze impeller, b) motor, c) base plate, d) foundation bolts, e) mating flanges with gasket and fasteners with all complete as directed by EIC.
SITC of Electric Motor Starter Control Panel, Compartmentalised Floor mounted type, as per TAC requirement, for the Auto / Manual Operations of the above 2 Pump sets along with the Power & Control Cabling, from the Pump set Drives to Control Panel (each 8.0 M. length Max) with Earthing & Inter-locking, having, MCCB Switches, Meters, Fuses, Audio / Visual Alarms and Indicating Lamps, with Direct-On-Line Starters for Jokey Pump set & star delta operation for main pump Drives of Hydrant System, with Sequential Operation Circuitries as directed by EIC.
SITC of Diesel Engine Starter Control Panel Solid-State, as per Spec. Wall mounted type for the Auto & Manual Operations of the Pump set, etc, along with the Battery Charger Power & Control Cabling from the Engine to Control Panel with Earthing & Inter-locking, having, Fuses AC / DC type, P.L.C. Based, Switches, Meters, Audio / Visual Alarms and Indicating Lamps, with Analogue Solid State Designs, with 3 Cold Impulses Starter for Diesel Engine of Standby Pump set with Sequential Operation Circuitries as directed by EIC.
INSTRUMENTATION
SITC of Pressure Gauges with Syphon Tube and Cock 150mm Dial Range - 0 to 1kg /cm2 as directed by EIC.
SITC of Pressure Switches with Tubing, Control Cabling up to Panel, complete as directed by EIC.
SUCTION & DELIVERY PIPING, FITTING & VALVES
SITC of MS ERW Piping as per IS: 1239, Part-I, heavy grade up to 150 NB and IS:3589, 6.35 mm thickness, including pipe fittings, flanges, pipe supports such as c clamps, threaded rods, fasteners as directed by EIC.
150 mm NB 6.3 mm thick
100mm NB 'C' Class
80mm NB 'C' Class
50mm NB 'C' Class
25mm NB 'C' Class
SITC of OS&Y Type Gate Valves of 200 psi rating with Matching Flanges, blots, nuts, washers, & gasket as directed by EIC.
SITC of Non Return Valves with Matching Flanges, bronze internal, EPDM seat, 200 psi rating, suitable horizontal & vertical installation as directed by EIC.
SITC of Air Vessel Tank 300 NB x 1.2 mtrs.as directed by EIC.
SITC of Ball Valve as directed by EIC.
SITC of 150 NB Four way Fire Brigade Inlet Connection having inbuilt non.return valve with 04 nos of 63 mm GM instantaneous inlets for Fire Water Tank as directed by EIC.
SITC of 25 NB Air Release Valve
Providing & fixing Structural Steel Support including transporting, fabricating, hoisting, painting with one coat of primer & two coats of Anticorrosive paint etc. Complete as directed by EIC.
Cabling from motor to Starter with copper earthing Strip within the pump house as directed by EIC.
HYDRANT SYSTEM
SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick & IS 1239 / II 'C' Class, with fittings IS 1239/II heavy grade including MS plate fabricated flange to ASA 150 LBS rating with accessories plus consumable for Underground pipes protection with by coating & wrapping with anticorrosive tape complete with required structural support if any as per specification as directed by EIC.
150mm NB 'C' Class
SITC of MS ERW Black Pipe as Per IS: 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suitable pipe Fabricated IS: 3589 / 6.3mm thick / IS: 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS rating & Aboveground Pipe Protection (Painting)and all required 'supports etc. Complete as directed by EIC.
150mm NB 'C' Class
100mm NB 'C' Class
80mm NB 'C' Class
SITC of Butterfly Valves of 200 psi rating with Matching Flanges, blots, nuts, washers, gasket etc. Completed as directed by EIC.
SITC of oblique type stainless steel single headed hydrant valve with 63mm female instantaneous outlet angled towards ground as per IS 5290-Type A, including matching flanges ,bolts ,studs, nuts, washers, gaskets etc. Completed as directed by EIC.
External
Internal
SITC of M. S. Hose Box of size 750 x 600 x 250mm-16swg thick fire red colour from outside & white enamel from inside - front glass painted with " fire " with key, handle and brass hinges -to accommodate 2 nos of 15mtrs long hose and 1 branch pipe as directed by EIC.
External
Internal
SITC of 63mm dia stainless steel universal branch pipe as per IS 2871 as directed by EIC.
SITC of Firefighting hose as per IS 14933 (Type -A). The fire hose shall be 15 mtrs long with 63mm dia stainless steel couplings at both end as directed by EIC.
15m Long
SITC of GM air release valve as directed by EIC.
SITC of swinging type M .S. Hose Reel drum of red powder coated finish with 30 mtrs x 25mm Dia rubber hose as per IS 884 as directed by EIC.
SITC of Ball Valve 25NB as directed by EIC.
SITC of 150NB Four way Siamese Connection for hydant network with 4 nos. of 63 mm instantaneous inlets in glass fronted wall box having inbuilt non return valve and 150mm BFV with fittings, nut, bolts & washers etc. Complete as directed by EIC.
SITC of RCC hume pipe NP3 class (300 mm dia) with class collar & joining material for road crossing as directed by EIC.
Providing & fixing Structural Steel Support including transporting, fabricating, hoisting, painting with one coat of primer & two coats of Anticorrosive paint etc. Complete as directed by EIC.
FIRE EXTINGUISHER QUANTITIES
Providing & fixing DCP TYPE 9.00 kg extinguisher Complete as directed by EIC.
Providing & fixing CO2 TYPE 9.00 kg extinguisher as directed by EIC.
Providing & fixing FOAM TYPE 9.00 kg extinguisher as directed by EIC.
Providing & fixing ABC 6.00 kg extinguisher as directed by EIC.
Providing & fixing CO2 TYPE 4.00 kg extinguisher as directed by EIC.
Providing & fixing Fire Buckets Set (04 Buckets in one set ) as directed by EIC.
Providing & fixing Safety Signage’s for staircase and evacuation as directed by EIC.
ADDRESSABLE FIRE ALARM SYSTEM
SITC of addressable panel 2 Loop as directed by EIC.
SITC of active repeater panel with required battery backup UL /Enlisted.(Security Cabin) as directed by EIC.
Addressable Manual Call Point with mounting base and junction box as directed by EIC.
Addressable Hooter as directed by EIC.
Addressable Control Module as directed by EIC.
Addressable Multicriteria Detectors as directed by EIC.
SITC 2Cx1.5Sq.mm PVC insulated Armoured cable with required mouting accessories like base saddles etc. as directed by EIC.
Total Part A
PART B - ELECTRIC WORK
Design, manufacture, supply, erection, testing and commissioning of machine room less, gearless, traction elevator of capacity 680 kg minimum (10 persons) For (G+4) storeyed Building with the following specifications: Location of Lifts : Inside the building i)Speed:1.0 to 1.25 MPS minimum ii)Floors:5 floors including GF iii)Travel:19.50Mtr iv) Stops & opening: 5 stops & 5 opening a) Car : Stainless steel scratch proof (Honey Combing finish) b) Landing doors : Stainless Steel brushed finish. c) Flooring 18-20mm Granite flooring, etc. as directed by EIC (Detailed technical specifications are provided separately.)
Total Part B
PART C - HVAC WORK
Supply following electric VRF units as directed by EIC.
HI SIDE WORKS
OUT DOOR UNITS-44 HP
INDOOR UNITS Ceiling Mounted High Static Duct able with Corded Remote- 8.2 TR
Four Way Cassette Unit with Cordless Remote
One Way Cassette Unit with Cordless Remote
Refenet
CRC Centralized Remote Controller
Air Curtains
LOW SIDE WORKS
Insulated Refrigerant Copper Piping for VRF SYSTEM. (Make: Copper Pipes- Mandev/ Rajco are Equivalent, Insulation-Arm flex/ Aero flex or equivalent)
Interconnecting Electrical Cabling for VRF System Make: Polycab are equivalent.
Insulated Hard PVC Drain Piping For VRF System (Make: Prince with Superlon/ Arm flex Nitrile Rubber Tubes are equivalent.)
40mm Dia
32mm Dia
25mm Dia
Indoor Hangers (duct able & Cassette Units )
MS Stands (outdoor Unit "L" /Table Type)
Refenet joints (Y)
GI Ducting (24G GI Ducting)
Insulation
13mm Nitrile Rubber Class O, Thermal Insulation
10mm Arm sound Class O, Acoustic Insulation
Air Distribution System
Linear Aluminium Grills
Volume Control/Collar Dampers
Canvas Connection
Supply Air Diffusers with Volume Control Damper
Return Air Diffusers with Volume Control Damper
Jet Nozzle
Disk Valve
Outdoor Cowl Piece with Bird Screen
Refrigerant Gas FOR VRV SYSTEM
Labour Charges For the Installation, Testing & Commissioning of following items
OUT DOOR UNITS-44 HP
INDOOR UNITS ITC DUCT ABLE UNIT-8.2 TR
ITC Four Way Cassette Unit.
ITC One Way Cassette Unit
ITC of CRC
ITC of Air Curtains
Underdeck Insulation
19mm thick Nitrile Rubber Insulation
ODU Cable-44 HP ODU Cable
Kitchen Ventilation Fan
800 CFM, 20mm Static Exhaust Fan
600 CFM, 20mm Static Fresh Air Fan/ IDU Fresh Air Also
Cable Tray
300mm x 50mm
250mm x 50mm
G.I. Earthing
ODU Stater Panel
MCB / ELCB
Total Part C
PART D - MISCELLANEOUS WORKS
Providing and fixing benches made up of composite wood FRP Top, bottom made of M-40 grade reinforce concrete block precast/cast-in-situ having dimensions shown in attached drawing including all tools, tackles, labours, machineries, moulding, fabricating, transporting & installation etc. complete as directed by EIC.
Providing and fixing JNPA’s logo of dimension as shown attached dwg. fabricated of 4mm thick plates Stainless steel of grade SS 316L, all welding shall be argon welding with 3 front fascia to be in 040 acrylics for illumination with Samsung LEDs or equivalent and water proof union drivers. 3M/LG make or equivalent vinyl as appeared shade to be pasted on to the front 040 acrylic to match the colour of the logo with lacquer coat on top surface with lifting arrangement. The signage to be fixed on to the stainless steel SS 316 frame with reverse screws and requested fixtures including, fabricating, moulding, buffing, installing, etc. Complete as directed by EIC.
Providing and fixing JNPA’s Box letters of dimension as shown attached dwg. fabricated of 4mm thick plates Stainless steel of grade SS 316L, all welding shall be argon welding with 3 front fascia to be in 040 acrylics for illumination with Samsung LEDS or equivalent and water proof union drivers. 3M/LG make or equivalent vinyl as appeared shade to be pasted on to the front 040 acrylic to match the colour of the logo with lacquer coat on top surface. with lifting arrangement. The signage to be fixed onto the stainless steel SS 316 frame with reverse screws and requested fixtures including, fabricating, moulding, buffing, installing, etc. Complete as directed by EIC.
Providing and fixing ‘PASSENGER FERRY TERMINAL’s Box letters of dimension as shown attached dwg. fabricated of 4mm thick plates stainless steel of grade SS 316L All welding shall be organ welding with 3 front fascia to be in 040 acrylics for illumination with Samsung are equivalent LEDS and water proof union drivers.3m/LG are equivalent vinyl as appeared shade to be pasted on to the front 040 acrylic to match the colour of the logo with lacquer coat on top surface. with lifting arrangement. The signage to be fixed onto the stainless steel SS 316 frame with reverse screws and requested fixtures including, fabricating, moulding, buffing, installing, etc. Complete as dissected by EIC.
Providing and fixing ‘यात्री नौका टर्मिनल’ Box letters of dimension as shown attached dwg. fabricated of 4mm thick plates stainless steel of grade SS 316L All welding shall be organ welding with 3 front fascia to be in 040 acrylics for illumination with Samsung are equivalent LEDS and water proof union drivers.3m/LG are equivalent vinyl as appeared shade to be pasted on to the front 040 acrylic to match the colour of the logo with lacquer coat on top surface. with lifting arrangement. The signage to be fixed onto the stainless steel SS 316 frame with reverse screws and requested fixtures including, fabricating, moulding, buffing, installing, etc. Complete as dissected by EIC.
Supply, Installation, Testing & Commissioning of all in one integrated LED solar streetlight consists of solar photovoltaic module, battery, battery management system, control electronics, LED driver, PIR sensor, inter-connecting cables and pole mounting piece integrated into the luminaire as a single unit. Solar street light with IP65 ingress protection having a system wattage not more than 26W with minimum 4500 lumen output, 60Wp high efficiency monocrystalline solar panel, highly efficient MPPT based charge controller and 12.8 V, 30 Ah IP68 Lithium Ferro Phosphate(LiFePO4) battery with proper battery management system. LED lumen efficacy shall be at least 180lm/W and LED driver should have >90% efficiency. Typical correlated colour temperature should be 5700K with CRI>70. It should have a PIR sensor to ensure battery optimisation with help of a suitable dimming profile. The luminaire should be housed in IK 08 impact resistance certified aluminium pressure die cast housing with anti-corrosive coating and must have a UV stabilized polycarbonate cover. The luminaire shall have a specially designed pole mounting piece that enables lateral as well as post top mounting and installation at varying tilts from 0 to 15 degrees for optimal light distribution. Company LOGO shall be Embossed. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Fixture should have BIS as per the Govt. rule and the certificate needs to be submitted during the bid submission. It should include 5 meter Octagonal Poles as mentioned in Technical Specifications. Octagonal Poles shall be designed as per ILE TR7 & BSS649 for Structural design & as per IS875 (Part III), 1987 dynamic loading. The Pole shaft shall be made single piece Hot dip galvanized continuously tapered having Octagonal cross section. The welding will be done as per BS5135/IS9595. No circumferential welding shall be allowed in the poles shaft. The structure shall be single hot dip galvanized as per BS729/IS 2629. A structure shall be provided at approximate 700MM height from the pole base. Foundation accessories will be as per IS1367.I/c required.
Total Part D
Total A + B + C + D
M/s Sadanand Engineering Works
Bidder Name
ENTERPRISING ENTERPRISE LLP
stage.html
html • 0.02 MB
finance_795436.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .