REPAIR TO JOINERY, FLOORING, PLUMBING, SANITARY FITTINGS, FIXTURES AND OTHER MISC WORKS IN THIMMAYA MARG, KASTURBA ROAD, RAK SF, MGSF, GAUR ENCLAVE, DILKUSHA, RAK MARG AND OTHER OFFRS MD ACCN OF AGE B/R-I UNDER GE (WEST) LUCKNOW

Amount

M & L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius in CM 1:6 including demolition of old brick work complete all as specified and directed.

M & L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall in CM 1:4 including demolition of old brick work complete all as specified and directed.

Dismantling Asbestos cement (corrugated or semi corrugated sheets etc) in roof covering complete all as specified and directed.

S & F Prepainted Galvalume aluminium zinc coating GI Based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Prepainted Galvalume aluminium zinc coating GI Based plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section as frame work complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 graded Strength 240 incl cutting, grinding, welding etc as required complete all as specified and directed

Dismantling wall and ceiling boards (fiber, pulp and insulation etc) or insulation boards, slabs, blankets any thickness including cover fillets complete all as specified and directed.

S & F pre-laminated Solid PVC Wall panelling consisting of 5mm any colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on brick work or concrete surface and finishing the surface even and fair without using extra cement complete all as specified and directed.

S & F for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing & connection 15 mm bore complete all as specified and directed.

S & F for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing & connection 20 mm bore complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick area of Each tiles exceeding 0.06Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of mortar 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for (1st quality) glazed ceramic tiles(coloured) 300x450x7mm/300x600x7mm thick as on vertical surfaces such as skirting/dados etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed.

M & L for (1st quality) vitrified tiles 8 to10mm thick light shade square polished, area of Each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for vitrified tiles 8 to10mm thick light shade square polished, area of Each tiles not exc 0.36 Sqm on vertical surfaces such as skirting/dados etc over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for 18-20mm thick granite work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing complete over and including 20mm thick screed bed and bedding layer of mortar for laying floor finishes with (1:6) cement mortar including dismantling old stone slab complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and directed.

S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance not exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

All as per Item No 23 above but excluding snap grid complete all as specified and directed.

18. S&F in repairs long body 15mm bore bib tap, quarter turn, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed. Make :- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35037PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair for CP Pillar taps fancy type15mm brass with capsten head chromium plated, screwed down high pressure with or without lettered "hot or cold" water long screwed both ends for iron pipe complete all as specified and directed. Make:- Jaquar CAT PART NO KUP 35001PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair for CP stop/angle valves fancy type chromium plated 15mm bore brass, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.

S & F in repair CP brass stop/angle valves 15mm bore fancy type chromium plated with quarter turn handle and wall flange complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35053PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repairs two way cock/ two way angle cock with wall flange matt chrome finish complete all as specified and directed. Make:- Jaquar CAT PART NO KUP35041PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair for 15mm bore CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- Jaquar CAT PART NO KUP35051BPM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair 15mm bore for CP wall mixer for mixing hot or cold water screwed down iron pipes complete all as specified and directed.

S & F in repair Single lever Wall mixer 3 in 1 system with provision of both hand shower and over head shower complete with 115mm long bend pipe on upper side connecting legs and wall flanges (without hand and over head shower) including all fittings and fixed complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35117PM or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair 15mm bore concealed stop valves brass, chromium plated long shank, with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 20mm bore gate valves with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed of 32mm complete all as specified and directed.

S & F in repair Brass spindle for Bib cock/stop cock complete all as specified and directed.

S & F in repair Brass spindle for concealed stop cock complete all as specified and directed.

S & F in repair Brass spindle for Bib cock/stop cock fancy type bib taps/stop cock Make- Jaguar/Parryware complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polyethylene of low or high density complete all as specified and directed.

S & F in repair PVC Syphon Kit with complete fittings for low level flushing cistern complete all as specified and directed.

S & F in repair PVC Syphon Kit with complete fittings for cascade type flushing cistern complete all as specified and directed.

S & F in repair Bib taps15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs swivel CP shower rose with long arm 125 mm dia complete all as specified and directed.

S & F in repair fancy type brass chromium plated towel rack 600mm long with lower hangers complete all as specified and directed. Make:- JAQUAR CAT PART No. AQN 7781 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repairs CP tubular towel rail 20mm dia D type 60cm long between flange complete all as specified directed.

S & F in repair fancy type brass chromium plated towel ring round with round flange including necessary fittings complete all as specified and directed. Make:- JAQUAR CAT PART No. AQN-7721 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair for fancy type brass chromium plated toilet paper holder with flap including all fittings and fixed complete all as specified and directed. Make:- JAQUAR CAT PART No. AKP-35773PS or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair Overhead shower 200 x 200mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 450mm long including all fittings and fixed complete all as specified and directed. Make:- JAQUAR CAT PART No. OHS-35497 & SHA 49483 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair hand shower 95mm dia round shape single flow ( face plate stainless steel and ABS body) with rubit cleaning system including 1.5m long easy flex tube in chrome finish with nuts shower arm 450mm long including all fittings and fixed complete all as specified and directed. Make:- JAQUAR CAT PART No. HSH 1653 & SHA 571 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair health faucet (hand shower) with 1 mtr flexible tube with hot and cold water supply wall hook, bracket etc complete set of superior quality complete all as specified and directed. Make: JAQUAR CAT PART No. ALD-565 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair double arm wall mounted reversible plain/magnifying (x3) pivotal looking mirror complete all as specified and directed. Make :- JAQUAR CAT PART No. CAN 1193N or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair Glass corner self, fancy type, 250x250 and 10mm thick fixed with brass bracket and screwed complete all as specified and directed. Make: JAQUAR CAT PART No. CAN 1173 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete all as specified and directed. Make: JAQUAR CAT PART No. CAN 1171N or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair PVC connection pipe 15mm bore with PTMT nuts of 450mm long complete all as specified and directed.

S & F in repair WHB vitreous china white flat back size 550x400mm including brackets, Brass CP waste coupling and PVC waste pipe complete all as specified and directed. Make :- JAQUAR/Kajaria Bathware Pvt Ltd/Cera Sanitaryware Ltd.

S & F in repair Vitreous china under counter type wash basin oval size 555 x 425 x 195mm including all fittings complete all as specified and directed. Make:- JAQUAR (FLORENTINE) CAT PART No. FLS-WHT-5701 or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair vitreous china Water closet pedestal pattern with seat cover white including Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc complete all as specified and directed. Make :- JAQUAR/Kajaria Bathware Pvt Ltd/Cera Sanitaryware Ltd.

S & F in repair Vitreous china Water closet pedestal pattern cascade type with in built flushing cistern and seat cover with complete fitting complete all as specified complete all as specified. Make : JAQUAR (LYRIC) CAT PART No. LYS -WHT-38851S300UFSMN or equivalent model of make Kajaria Bathware Pvt Ltd./Cera Sanitaryware Ltd.

S & F in repair vitreous china squatting pan, Orissa pattern, long pan size 580 x 440mm with CI trap, long neck 100mm with integral foot rest & fixing including making good floor to match complete all as specified and directed.

S & F in repair kitchen sink with drainage board made out of 1mm thick stainless steel sheet with plug washer, waste coupling, waste pipe including bedding in cement mortar, connection to union and drain pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack made out of not less than 1mm thick stainless steel sheet of size 750mm x 600mm x 250mm of approved pattern complete all as specified and directed.

S & F in repair PVC coloured bath cabinet, overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed.

S & F in repair waste pipe 32mm for WHB & sink complete all as specified and directed.

S & F in repair plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repair plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device for cascade type WC as per sample complete all as specified and directed.

S & F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

S & F stainless steel peg set of 6 pegs of (size of peg 125 to 175mm) fancy type complete all as specified and directed.

S & F in repair 15mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

S&F 500 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked , hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling old water tanks complete all as specified and directed

S&F 1000 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked , hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling old water tanks complete all as specified and directed

Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area not exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and directed.

Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting from the face of jamb/wall exceeding half brick but not exceeding one brick complete all as specified and directed.

M & L for PCC type B-1 (1:2:4) 20mm graded aggregate as in concrete for fixing hold fasts for bed blocks etc complete all as specified and directed.

S&F Bands, straps, supports or stays for rain water ventilating pipes including bolts if required, hooks for large gates, hook and pintel hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, palin angle cleat for securing purlin to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Second class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.

Supply and fixing for 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 125mm x 63mm double rebated factory made 100% solid WPC (Wood polymer composite) paintable door frame made from 100% lead free (single extruded process) material with density not less than 780 kg / Cum complete all as specified and directed. (a) Door frame shall be water proof, termite proof, fire retardant and having excellent screws holding capacity. (b) Rate for this item includes material and labour for fixing of frame with minimum 06 nos of hold fasts / dash through bolts of suitable size as directed.

S & F 100 x 63mm single rebated factory made, 100% solid WPC (wood polymer composite) Paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cum complete all as specified and directed. (a) Door frame shall be water proof, termite proof, fire retardant and having excellent screws holding capacity. (b) Rate for this item includes material and labour for fixing of frame with minimum 06 nos of hold fasts / dash through bolts of suitable size as directed.

S & F solid PVC door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed.

S & F 28mm thick factory made 100% solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company complete all as specified and directed.

S & F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S & F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S & F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S & F stainless steel hinges 100mm size and fixed complete all as specified and directed.

S & F butt hinges 100mm mild steel hinges medium weight and fixed complete all as specified and directed.

S & F Rubber beading size 65x5mm for doors complete all as specified and directed.

S & F in repair 18/19 mm thick Block Board grade 2 quality, interior grade, commercial type, fixed with screws etc complete all as specified and directed.

S & F in repair 18mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company complete all as specified and directed.

S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S & F 0.9 mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed.

S & F 30 mm width of flaps continuous piano hinges MS bright finish are electroglavanised complete all as specified and directed.

S & F 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F butt hinges 75 mm mild steel hinges medium weight and fixed complete all as specified and directed.

M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F in repair PVC tank cover with locking arrangement for 500 / 1000 ltrs water tank complete all as specified and directed.

S & F in repair Flush Handle for any respective pattern for low level flushing cistern any description complete all as specified.

S & F in repair 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair 40 mm bore Brass chromium plated Waste coupling for kitchen sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including curtain rings, finyl and side brackets/wall to wall complete all as specified and directed.

S & F in repair Soap dish steel CP any size complete all as specified and directed.

S & F in repair stainless steel grating doom 100mm dia complete all as specified and as directed.

M & L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof kerbs, benching, coping, padding, kneelers complete all as specified and directed.

S &F in repair 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) complete all as specified and directed.

S & F in repair 100mm bore CI spun cast soil waste and vent pipe in any length with or without ears with cement joints and fixed to walls complete all as specified and directed.

S & F in repair 75mm bore CI spun cast soil waste and vent pipe in any length with or without ears with cement joints and fixed to walls complete all as specified and directed.

S & F in repair 100mm bore CI spun cast soil waste and vent pipe in any length with or without ears with cement joints and laid in trenches or in floors complete all as specified and directed.

S & F in repair 75mm bore CI spun cast soil waste and vent pipe in any length with or without ears with cement joints and laid in trenches or in floors complete all as specified and directed.

S & F cast iron bends (any radius) diminishing pieces or tapers for 100mm dia complete all as specified and as directed.

S & F cast iron bends (any radius) diminishing pieces or tapers for 75mm dia complete all as specified and as directed.

S & F 75mm dia cast iron cowl complete all as specified and directed.

S&F in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F in repair 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

S&F in repair 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

S&F in repair for aluminium anodized barrel tower bolts 200 mm of extruded section all as specified and directed.

S&F in repair plain Aluminium sheet 0.71mm thick fixed with nails to wooden shutters complete all as specified and directed.

S&F in repair for aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and directed.

S&F in repairs galvanised steel wire cloth 0.47mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repairs Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.

M&L for 3mm thick plain sheet glass ordinary quality incl glazing with putty area not exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.

S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered untreated surface of wall and applying two coats of oil bound distemper over a coat of birla putty complete all as specified and directed.

M & L for preparation of old treated surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation old treated surface of wall and applying one coat of cement base paint complete all as specified and directed.

M & L for preparation old treated surface of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of old treated surface of wall and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparation of old treated surface of wall and applying two coats of oil bound distemper complete all as specified and directed.

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed.

Complete removal of existing treatment and applying two coats of oil bound distemper over a coat of birla putty complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete and applying minimum 1mm thick wall care putty over prepared surface to achieve the surface even and smooth for painting including Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- Primer and emulsion to be carried out through air less spray machine ( Mechanical means)

S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.5 sqm in each pane and fixed to ventilator complete all as specified and directed.

S & F Anodised aluminium door frame powder coated for door, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

S & F anodised aluminium window and ventilator powder coated shutters top hung type without sash, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs stainless steel pipes of 304 grade of square/tubular section and thickness 1.5mm (minimum) as in railing, hand rail, baluster etc and fixed at spacting not more than 1200mm with D button on baluster incl bottom flange including cutting, welding, drilling holes in existing floor or welding ends on existing RCC columns complete all as specified and directed. (Note - Size/pattern of stainless steel sections shall be approved by GE).

M/S Reliance Construction

Spectrum Enterprises

M/s Bipin Construction

ANIL CONSTRUCTION

Divya Jyoti Constructions

rajan construction