Loading
Loading…
Loading…
Tender Value
₹2 L
EMD Value
₹6,000
Closing Date
29 Jul 2026, 3:00 pm3d left
EXECUTIVE ENGINEER REW KUPWARA
EXECUTIVE ENGINEER REW KUPWARA
Constt. Of Selfie point at Ganapora Block qaziabad
2026_RDPR_316243_32
NIT NO 61 OF 2026-27 ADF QAZIABAD
Open Tender
Civil Works
Percentage
EXECUTIVE ENGINEER REW KUPWARA
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
EXECUTIVE ENGINEER REW KUPWARA
₹6,000
16 Jul 2026
16 Jul 2026
29 Jul 2026
16 Jul 2026
29 Jul 2026
16 Jul 2026
16 Jul 2026 - 16 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soils | - | Cum | - | - |
| 2 | pl of dry stone soiling tighetly hand packed | - | cum | - | - |
| 3 | Cost in situ C.conc. M5 Grade using 40mm stone agg. excluding cost of shuttering in… | - | cum | - | - |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) using 20% Plum | - | Cum | - | - |
| 5 | Providing and laying in position (1:2:4) reinforced c.conc. excl. cost of shuttering & reinforcement | - | Cum | - | - |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in 1:6 mix & extra for brick work in superstructure foundation and plinth including curing in : | - | Cum | - | - |
| 7 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels | 1 | sm | 1 | ₹1 |
| 8 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.For Granite Work | 1 | rm | - | - |
| 9 | Providing and fixing stainless steel words of size 20 cm in hight.13 no. Of words of size 8 inch | - | no | - | - |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. | - | sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.59 MB
BOQ_1030273.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].