Secunderabad Division Electrical Maintenance Department - (i) Bhongir- Construction of 8 Bedded RPF barracks for Male at Bhongiri -Out Post (ii) DLS/KZJ - Upgradation of RPF Out post building at DLS/KZJ (iii) Jamikunta - Construction of CPWI office and shed at JMKT (iv) Provision of 2 Nos. of 8 passenger capacity lifts in place of existing over aged lifts in Sanchalan Bhavan and Provision of 02 Nos of 13 passenger lifts capacity at New Annex Building at RSB (v) CHZ - Construction of new type design RPF post- office building at Cherlapalli (vi) Secunderabad - Additional block for TTE Rest House with 27 Beds (14 Beds for Male TTEs and 13 Beds for Lady TTEs with separate toilets) with AC's, kitchen, Store, RO water and furniture provision (vii) Proposal for construction of new building of 5000 Sqft fri Cyber Cell/SCR for formation of integrated command control Centre - Electrical arrangements.

A-(i) Bhongir- Construction of 8 Bedded RPF barracks for Male at

Concrete for foundations and plinth in other than hard soil and rock

Concrete for foundations and plinth in hard soil.

Horizontal drilling of bores for LT cables

Excavation of cable trench in all types of soils for LT cable as per the directions of engineer at site making good after laying the cable

Excavation of cable trench in Tar road surface as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I

Excavation of cable trench incement concrete bed flooring as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I

Excavation of cable trench across the track as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I

Provision of Earthing arrangements.

Supply and Erection Provision of RCC earth pit hollow box of size 300 mm x 300 mm 9 x 300mm with 50 mm wall thickness by using M20 Grade precast RCC. It includes fixing of earth pits at various locations (All the required men, material and transportation are to be arranged by contractor) Drawings to be collected from Sr.DEE/M/SC office

Supply and Erection of RCC precast slabs with hook to cover Earth pits of dimensions. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.) Drawings to be collected from Sr.DEE/M/SC office.

Supply and erection of earth electrodes for maintenance free earthing i.e., copper bonded high tensile low carbon steel electrode of with minimum 3mtrs. Long, 17 mm dia with copper coating thickness of min 250 microns and current carrying capacity of min 15 KA for 1 sec.

Supply and filling of Earth enhancing materials for maintenance free earthing.

Supply and fixing of copper bus bar 50x 6mm.

Supply and fixing of 25x3 mm EC grade copper strip for connecting earth terminal to the bus bar in equipment room.

Earth chamber with LID 100x250x250 mm.

Supply & laying of 1Cx35mm cable from pit to main equipment bus bar including bolts, nuts & HDPE pipes

Supply & providing of exothermic weld connection

Supply of TPN DB-7 segment 12 way DB comprising of 100A MCCB and outgoings by 2 Nos. of 63A FP MCBs, 2 Nos. of 20A DP MCBs, 2 Nos. of 63A FP RCCBs with 100ma sensitivity complete with copper busbar etc.

Erection, Testing and commissioning of TPN DB-7 segment 12 way DB comprising of 100A MCCB and outgoings by 2 Nos. of 63A FP MCBs, 2 Nos. of 20A DP MCBs, 2 Nos. of 63A FP RCCBs with 100ma sensitivity complete with copper busbar etc.

Supply of bulk head fitting IP43 with aluminium body, heat resistant glass cover and powder coated wire gurad including 10mm thick hylam sheet

Erection of bulk head fitting IP43 with aluminium body, heat resistant glass cover and powder coated wire gurad including 10mm thick hylam sheet

Supply of 100 mm 'B' class GI pipes as perIS:1239 along with accessories.

Erection of 100 mm 'B' class GI pipes as perIS:1239 along with accessories.

Supply of 50mm 'B' class GI pipes as per IS:1239 along with accessories.

Erection of 50mm 'B' class GI pipes as per IS:1239 along with accessories.

Supply of 50 mm of HDPE pipes of Grade PE-100, PN 6(6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995

Erection of 50 mm of HDPE pipes of Grade PE-100, PN 6(6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995

Supply of 63 mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995

Erection of 63 mm of HDPE pipes of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995

Supply of 110 mm size of HDPE pipe of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (SDR - 21)

Erection of 110 mm size of HDPE pipe of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (SDR - 21)

Supply of 4 core 50 Sqmm LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations.

Erection of 4 core 50 Sqmm LTUG XLPE aluminium armoured cable as per IS 7098 Part I alongwith end terminations.

Supply of 4 core x25 Sqmm LTU G XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Erection of 4 core x25 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Supply of 4 core x16 Sqmm LTU G XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Erection of 4 core x16 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Supply of 4 core x120 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Erection of 4 core x120 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Supply of 4 core x95 Sqmm LTU G XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Erection of 4 core x95 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Supply of 4 core x70 Sqmm LTU G XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Erection of 4 core x70 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations

Supply of 8 SWG GI wire.

Erection of 8 SWG GI wire.

Supply of 25mm PVC rigid conduit pipes of 2mm thickness as per BIS-9537 (latest) along with accessories.

Erection of 25mm PVC rigid conduit pipes of 2mm thickness as per BIS-9537 (latest) along with accessories.

Supply of 32mm PVC rigid conduit pipes of 2mm thickness as per BIS-9537 (latest) along with accessories.

Erection of 32mm PVC rigid conduit pipes of 2mm thickness as per BIS-9537 (latest) along with accessories.

Supply of 25mm PVC casing and capping on wall along with accessories.

Erection of 25mm PVC casing and capping on wall along with accessories.

Supply of 32mm PVC casing and capping on wall along with accessories.

Erection of 32mm PVC casing and capping on wall along with accessories.

Supply & erection of 25mm Flexible pipes as per BIS-9537 (latest) along with accessories.

Cutting and chipping the wall for laying the PVC conduit pipe and plastering after laying the PVC conduit pipe with cement and sand mortar mixed with 1:8 ratio, but without laying PVC conduit pipe.

Supply of 2Nos. of 1.5 Sq.mm, o f FRLSH PVC insulated flexible multistrand copper wire

Erection of 2Nos. of 1.5 Sq.mm, of FRLSH PVC insulated flexible multistrand copper wire

Supply of 3Nos. of 1.5 Sq.mm, o f FRLSH PVC insulated flexible multistrand copper wire including earth continuity wire .

Erection of 3Nos. of 1.5 Sq.mm, of FRLSH PVC insulated flexible multistrand copper wire including earth continuity wire .

Supply of 2 Nos.. of 2.5 Sq.mm, 1No. 1.5 sq.mm of FRLSH PVC insulated flexible multistrand copper wire including earth continuity wire.

Erection of 2 Nos.. of 2.5 Sq.mm, 1No. 1.5 sq.mm of FRLSH PVC insulated flexible multistrand copper wire including earth continuity wire.

Supply of 2Nos.. of 4.0 Sq.mm, 1No. 2.5 sq.mm of FRLSH PVC insulated flexible multistrand copper wire including earth continuity wire.

Erection of 2Nos.. of 4.0 Sq.mm, 1No. 2.5 sq.mm of FRLSH PVC insulated flexible multistrand copper wire including earth continuity wire.

Supply of single core multi strand 4 sq. mm FRLSH copper flexible cable

Laying , connecting & commissioning of single core multi strand 4 sq. mm FRLSH copper flexible cable

Supply of single core multi strand 6 sq. mm FRLSH copper flexible cable

Laying , connecting & commissioning of single core multi strand 6 sq. mm FRLSH copper flexible cable

Supply of single core multi strand 10 sq. mm FRLSH copper flexible cable

Laying , connecting & commissioning of single core multi strand 10 sq. mm FRLSH copper flexible cable

Supply of 1 or 2 module GI concealed sheet metal boxes

Erection of 1 or 2 module GI concealed sheet metal boxes

Supply of 3 module GI concealed sheet metal boxes

Erection of 3 module GI concealed sheet metal boxes

Supply of 4 module GI concealed sheet metal boxes

Erection of 4 module GI concealed sheet metal boxes

Supply of 6 module GI concealed sheet metal boxes

Erection of 6 module GI concealed sheet metal boxes

Supply of 8 or 9 module GI concealed sheet metal boxes

Erection of 8 or 9 module GI concealed sheet metal boxes

Supply of 12 module GI concealed sheet metal boxes

Erection of 12 module GI concealed sheet metal boxes

Supply of 1 or 2 modular plates with frame

Erection of 1 or 2 modular plates with frame

Supply of 3 modular plates with frame

Erection of 3 modular plates with frame

Supply of 4 modular plates with frame

Erection of 4 modular plates with frame

Supply of 6 modular plates with frame

Erection of 6 modular plates with frame

Supply of 8 or 9 modular plates with frame

Erection of 8 or 9 modular plates with frame

Supply of 12 modular plates with frame

Erection of 12 modular plates with frame

Supply of 3 way module size GI sheet metal/PVC box inconcealed/surface similar to GM makeor equivalent asper the directions of Engineer at site with accessories

Erection of 3 way module size GI sheet metal/PVC box inconcealed/surface similar to GM makeor equivalent asper the directions of Engineer at site with accessories

Supply of 6 way module size GI sheet metal/PVC box inconcealed/surfacesimilar to GM makeor equivalent asper the directions of Engineer at site with accessories

Erection of 6 way module size GI sheet metal/PVC box inconcealed/surfacesimilar to GM makeor equivalent asper the directions of Engineer at site with accessories

Supply of 8 way module size GI sheet metal/PVC box inconcealed/surfacesimilar to GM makeor equivalent asper the directions of Engineer at site with accessories

Erection of 8 way module size GI sheet metal/PVC box inconcealed/surfacesimilar to GM makeor equivalent asper the directions of Engineer at site with accessories

Supply of 12 way module size GI sheetmetal/PVC box inconcealed/surfacesimilar to GM make or equivalent asper the directions of Engineer at site with accessories

Erection of 12 way module size GI sheetmetal/PVC box inconcealed/surfacesimilar to GM make or equivalent asper the directions of Engineer at site with accessories

Supply of 6/10A 1-way modular switch

Erection of 6/10A 1-way modular switch

Supply of 6/10A multi socket for cell phone pin or 2pin +3 pin with safety shutter

Erection of 6/10A multi socket for cell phone pin or 2pin +3 pin with safety shutter

Supply of 16/20A one way modular switch

Erection of 16/20A one way modular switch

Supply of 6&16/20A twin socket heavy duty socket with safety shutter

Erection of 6&16/20A twin socket heavy duty socket with safety shutter

Supply of modular MCB 32A DP 1-Way switch with LED indicator 2 module

Erection of modular MCB 32A DP 1-Way switch with LED indicator 2 module

Supply of modular MCB DP 20/25 A capacity similar to GM make as per the directions of engineer at site (for ac units)

Fixing of modular MCB DP 20/25 A capacity similar to GM make as per the directions of engineer at site (for ac units)

Supply of 10 A sp modular MCB

Erection of 10 A sp modular MCB

Supply of Ceiling rose (3-terminal).

Erection of Ceiling rose (3-terminal).

Supply of Angle holders

Erection of Angle holders

Supply of BLDC fans 1200mm sweep with remote

Erection of BLDC fans 1200mm sweep with remote

Supply of Modular type exhaust fan 300mm/380mm

Erection of Modular type exhaust fan 300mm/380mm

Supply of window mount 12"" sweep heavy duty exhaust fan made of alloy steel of 50-55 w with complete with all accessories

Fixing and connecting of window mount 12"" sweep heavy duty exhaust fan made of alloy steel of 50-55 w with complete with all accessories

Supply & fixing of Ding dong call bell

Supply & erection of modular type bell push switch as per the directions of Engineer at site

Supply of Foot Lamp light(4module) with support frame &plate (3Nos of 0.5W LEDs

Erection of Foot Lamp light(4module) with support frame &plate (3Nos of 0.5W LEDs

Supply of LED based reading light fitting 360 degree tiltable type based reading light fitting

Erection of LED based reading light fitting 360 degree tiltable type based reading light fitting

Supply of 200 W LED Flood light fixture complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed.

Erection, connecting, testing and commissioning of 200 W LED Flood light fixture complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed.

Supply of integrated T8 20W LED (indoor type) tube light fixture complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed.

Erection,connecting, testing and commissioning of integrated T8 20W LED (indoor type) tube light fixture complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed.

Supply of surface mounted LED 40W luminaire batten type fitting complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed.

Erection, connecting, testing and commissioning of surface mounted LED 40W luminaire batten type fitting complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed.

Supply of recess 15 W LED Round Down lighters with diffuser and electronic driver complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed.

Erection, connecting, testing and commissioning of recess 15 W LED Round Down lighters with diffuser and electronic driver complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed.

Supply of 1' x 1' 18 W LED celling surface light fitting including power LEDs complete with all accessories as per specification enclosed

Erection of 1' x 1' 18 W LED celling surface light fitting including power LEDs complete with all accessories as per specification enclosed

Supply of 2'X2', 43W LED luminaire complete with necessary mounting accessories, clamps and Hardware etc, as per specification enclosed.

Erection, connecting testing and commissioning of 2'X2', 43W LED luminaire complete with necessary mounting accessories, clamps and Hardware etc, as per specification enclosed.

Supply of 10 W LED Indoor type tube light fitting as per specification enclosed.

Erection of 10 W LED Indoor type tube light fitting as per specification enclosed.

Supply of following sizes of 5 mtr hot dip galvanised double arm Conicle poles with foundation bolts, base plate, MCB & brackets.

Erection of following sizes of 5 mtr hot dip galvanised double arm Conicle poles with foundation bolts, base plate, MCB & brackets.

Supply of 40W LED Street light luminarie made up of pressure die cast aluminum 148 housing with high efficiency LED as lighting source and lens with toughened glass having bottom opening separate driver compartment with IP 66 protection suitable to operate with necessary mounting accessories, clamps and hardware etc as per specification enclosed.

Erection, connecting, testing and commissioning of 40W LED Street light luminarie 149 made up of pressure die cast aluminum housing with high efficiency LED as lighting source and lens with toughened glass having bottom opening separate driver compartment with IP 66 protection suitable to operate with necessary mounting accessories, clamps and hardware etc as per specification enclosed.

"Supply of 12 way Vertical TPN IP 54 distribution board similar to Legrand model No.507753 as per IEC 61439/3 or latest fixed on wall with the following switches 1X160A 25KA4pole 150 Electronic release with inbuilt earth leakage module of adjustable sensitivity maximumoperative voltage 690V compatibility MCCB I/C and 4 x 63 A 10KA 'C' Curve TPMCB out going,4 x 32 A 10KA 'C' Curve TPMCB out going, 4 x 20 A 10KA DP 'C' Curve MCB out going, 4x10A'C' Curve SPMCB out going with all other connected accessories etc. Note: MCCBs: ICs=100%ICu "

Fixing of 12 way Vertical TPN IP 54 distribution board similar to Legrand model No.507753 as per IEC 61439/3 or latest fixed on wall with the following switches 1X160A 25KA4pole 151 Electronic release with inbuilt earth leakage module of adjustable sensitivity maximumoperative voltage 690V compatibility MCCB I/C and 4 x 63 A 10KA 'C' Curve TPMCB out going,4 x 32 A 10KA 'C' Curve TPMCB out going, 4 x 20 A 10KA DP 'C' Curve MCB out going, 4x10A'C' Curve SPMCB out going with all other connected accessories etc. Note: MCCBs: ICs=100%ICu "

Design, fabrication, supply, erection, testing, Commissioning of Outdoor LT panel board with 14SWG ( with powder coated RAL 7032 ) with suitable Bus bar 300A capacity , Digital 152 MFM ,digital voltmeter, digital ammeter with CTs, indication lamps etc, for housing of following switchgear 250A 4P MCCB for I/C-01 No's, 4x100A 4 pole MCCB ,4x63A MCCBS , 2x32A MCCBS complete with accessories, etc Note: Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-3) (1) All cables terminations to be done along with double compression glands and required lugs. as per the direction of Engineer at site.

Design, fabrication, supply, erection, testing, Commissioning of Indoor LT panel board with 14SWG ( with powder coated RAL 7032 ) with suitable Bus bar 600A capacity , Digital MFM ,digital voltmeter, digital ammeter with CTs, indication lamps etc, for housing of following switchgear 250A 4P MCCB for I/C-01 No's, 2x100A 4 pole MCCB ,4x63A MCCBS , 4x32A MCCBS ,250 A COS complete with accessories, etc Note: Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-3) (1) All cables terminations to be done along with double compression glands and required lugs. as per the direction of Engineer at site.

Supply and Erection of Digital multi function panel meter with RS485 communication port.

Supply of 8-way Double door (SPN) distribution boards (Sleek type)

Erection of 8-way Double door (SPN) distribution boards (Sleek type)

Supply of 12 way SPN double door distribution board

Erection of 12 way SPN double door distribution board

Supply of 25A DP RCCB with 30mA sensitivity

Erection of 25A DP RCCB with 30mA sensitivity

Supply of 40 amp 4pole 30mA RCCB as per the direction of the engineer at site.

Fixing of 40 amp 4pole 30mA RCCB as per the direction of the engineer at site.

Supply of 6/10/16/20/25/32A, C-curve DP MCBs with 10KA breaking capacity

Erection of 6/10/16/20/25/32A, C-curve DP MCBs with 10KA breaking capacity

Supply of 6/10/16/20/25/32A, C-curve SP MCBs with 10KA breaking capacity

Erection of 6/10/16/20/25/32A, C-curve SP MCBs with 10KA breaking capacity

Supply of 40A, C-curve FP MCB with 10KA breaking capacity

Erection of 40A, C-curve FP MCB with 10KA breaking capacity

Supply of 50/63A, C-curve DP MCB with 10KA breaking capacity

Erection of 50/63A, C-curve DP MCB with 10KA breaking capacity

Supply of 40 Ltr Water Coolers

Erection of 40 Ltr Water Coolers

Supply and erection ,testing and commissioning of ( desert coolers) Air coolers

Supply of 150 Ltr Water Coolers

Erection of 150 Ltr Water Coolers

Supply and erection of Time switch daily operating type

Supply and erection of Power contactor 25A capacity 2 NO type

Design, Supply, erection, fixing and commissioning of 10 KWp rooftop on-grid solar plant with MPPTtechnology with Mono PERC Bifacial solar modules of 535wp or above,ModuleMounting Structure, Power Conditioning Unit (PCU) consisting of Maximum Power Point Tracker (MPPT),Inverter (10KW output puresine wave inverterwith RMS), and Controls and Protections, interconnect cables and switches ,all complete as per the standard specifications as per the direction of site Engineer,

Supply, erection, connecting, testing and commissioning of 5.0 HP 43 stage Energy efficient Vertical submersible pump set , Three Phase ,415 Vol, suitable for 100mm dia bore well pump set Delivery size : 32mm, Head 284 Mtr ,LPM @58"44@ RPM :2880

Supply & fixing of control panel consisting of DOL starter, single phase preventer with 180 power automatic ON & OFF system, with dry run, pilot lamps, selector switch, Voltmeter, Ammeter in suitable sheet steel box of 16 SWG upto 7.5HP pumps including all connected accessories as per the directions of engineer at site.

Supply of 3 core 4Sq.mm copper flat cable as per the direction of site Engineer.

"Laying, connecting and commissioning of 3 core 4Sq.mm copper flat cable as per the direction of site Engineer."

Supply of 40mm of HDPE pipes of Grade PE-100, PN 16 (16Kg/Cm2 Capacity) with accessories as per IS 4984 - 2016 (SDR-21)

Erection of 40mm of HDPE pipes of Grade PE-100, PN 16 (16Kg/Cm2 Capacity) with accessories as per IS 4984 - 2016 (SDR-21)

Supply, fixing, connecting, testing & commissioning of Power Analyzer for monitoring frequency

Supply and fixing of Occupancy Infrared motion sensor 2 module similar to Model no.6772 51 of Legrand make or equavalant Havells/GM/L&T/Havells make with all necessary accessories complete.

Supply and fixing, Transportation of 14 SWG MS Sheet iron Junction Box for 4Core 120sqmm Cable termination with 250A suitable copper busbar capacity JB of size 18''x18"X12"

Supply and Erection of cable Termination Jn.box made-up of thermoplastic suitable for termination of 25 / 35 / 50sq.mm cables with IP 55 / IP 65 protection the suitable clamping arrangements for fixing to pole or wall.

Supply of SMC 4 terminal junction Box with Accessories

Erection of SMC 4 terminal junction Box with Accessories

Supply, installation,testing, gas charging & commissioning of 2TR capacity, Inverter type, copper coil, BEE star cassette AC unit with all connected accessories.

Supply, installation,testing, gas charging & commissioning of 3TR capacity Inverter type,copper coil, BEE star cassette AC unit with all connected accessories.

Supply, installation of Hard/Soft Copper Refrigerant Piping complete with fittings,elbow, bends, supporting arrangements on wall for 2/3TR Cassette as per the direction of Engineer at site.

Supply, fabrication and fixing of suitable size out door wall mounted chair type MS base frame stand for outdoor unit2/ 3.0TR cassette unit including all connected accessories etc.

Supply, installation, testing and comissioning of 5 star inverter type 1.5 Ton capacity 195 split type Air conditioning unit complete, conforming to IS: 1391(Part-2)-1992 with amdts No.1 to 4 fitted with rotary compressor suitable for using HCFC refrigerant or latest for wall mounting as per specification enclosed.

Supply of copper pipe 1/4" & 1/2" of 20 SWG along with 9 mm thickness insulation

Supply of 1" CPVC Drain pipe with all connected accessories as per site requirement.

Supply and fixing of ISI 38/40mm width and 12.5mm height PVC pipe/Casing and Caping, with necessary screws including joints bends and all necessary accessories complete.

Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit/Casing and capping pipe.

Supply of 63A 4 pole MCCB with 16KA breaking capacity with Adjustable thermal magnetic release with extended rotor handle, spereder links(4 nos-02 sets), phase barriers

Erection of 63A 4 pole MCCB with 16KA breaking capacity with Adjustable thermal magnetic release with extended rotor handle, spereder links(4 nos-02 sets), phase barriers

Supply of 32A 4 pole MCCBs with 16 KA breaking capacity with Adjustable thermal magnetic release with extended rotor handle, spereder links(4 nos-02 sets), phase barriers

Erection of 32A 4 pole MCCBs with 16 KA breaking capacity with Adjustable thermal magnetic release with extended rotor handle, spereder links(4 nos-02 sets), phase barriers

Supply of 250A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release with extended rotor handle, spereder links(4 nos-02 sets), phase barriers

Erection of 250A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release with extended rotor handle, spereder links(4 nos-02 sets), phase barriers

Supply and erection of 250 A 4P On-load Change over switch in open execution with complete with accessories etc.

Supply of 100A 4 pole MCCB with 25KA breaking capacity with Adjustable thermal magnetic release with extended rotor handle, spereder links(4 nos-02 sets), phase barriers

Erection of 100A 4 pole MCCB with 25KA breaking capacity with Adjustable thermal magnetic release with extended rotor handle, spereder links(4 nos-02 sets), phase barriers

Supply and erection encloser for MCCBs

Supply of 25 Lt Geyser(5 star rated)

Erection of 25 Lt Geyser(5 star rated)

Supply and erection of fabricated small parts steel (Galavanised).

Dismantlement of old lifts at RSB Building