Urgent nature of electro-mechanical works to be carried out at Water Supply Scheme Chuntwaliwar.

Amount

Supply, Installation, Testing and Commissioning of Link sets along with D-Clamps/Mukhi Clamps, nuts and bolts etc for fitting on substations as per site requirement at WSS Chuntwaliwar 3rd.

Supply, Installation, Testing and commissioning of 11KV end to end cable termination kit for 35mm Sq. XLPE cable (ABC Type) at WSS Chuntwaliwar 2nd and 3rd.

Providing, installation, testing and commissioning of manual type triple spur gear chain pulley block (to replace old chain pully block which has outlived its useful life) having following features: Gears: -The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof box. The lubricant of gears should be of high viscosity and high temperature for longer life of gears. Load Chain: - The load chain shall be made of high tensile alloy steel having high wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in-built factor of safety for safer operation. Load chain wheel: - The load chain wheel should be duly supported and specially designed, perfectly machined for providing correct grip to load chain to make the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below: i. Make--Indeff/ Pull Lift/ Globe (Strictly as per relevant IS Codes) or equivalent make ii Capacity-1.5 MT iii No, of load chain falls =2 or above iv Min. Height of lift = 6 M Note: - Test Certificate of Manufacture to be produced at the time of supply of equipment.

M/S GERMAN MECH ELECTRO ENGG (BID ID -2428981)