Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹4,500
Closing Date
11 Jul 2026, 3:00 pm2d left
Executive Engineer
UPSCIDCO LALITPUR
Vidhan Mandal Kshetra Vikas Nidhi 2025-26 ke antargat Block Bar ke gram Myav me Ruvai ke sidhha Baba Mandir ke pas Sarvjanik Sthan par Teen Shade ka nirman karya
2026_SCIDC_1166195_1
02/EE/Lalitpur/ET/2026-27
Open Tender
Civil Works - Others
120 days
gram Myav Block Bar Lalitpur
Please refer the tender documents
2 documents required · 2 mandatory
₹531
Yes
UPSCIDCO
₹4,500
Yes
4 Jul 2026
4 Jul 2026
11 Jul 2026
4 Jul 2026
11 Jul 2026
4 Jul 2026
4 Jul 2026 - 11 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1TEEN SHED | |||||
| 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge | - | cum | - | - |
| 1.02 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural
sources : 8 graded stone aggregate 40 mm nominal size
derived from natural sources | - | cum | 1 | - |
| 1.03 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size de
rived from natural sources | - | cum | - | - |
| 1.04 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | - | kg | 1 | - |
| 1.05 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | 1 | kg | 1 | ₹1 |
| 1.06 | Providing & fixing at all heights, levels and locations Mill finish
Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. | 1 | sqm | - | - |
| 1.07 | Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade : Two or more coats on new work | 1 | sqm | 1 | ₹1 |
| 1.08 | Providing and fixing Sign board | - | no | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.64 MB
myavnit.pdf
Tender Documents • 3.62 MB
BOQ_2187432.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid