16/EDC(H)/2025-26

Amount

Safe loading Carriage & unloading of following material from store centre to pit site/JE dump store.

PCC Pole of size 8.5 mtr long

ST pole 11 mtr. Long.

Stay Set Complete

33 KV Pin with Net

Disc insulator With fitting (B&S) 70KN

MS Earthing Rod (2540x20 mm) With Fitting

ACSR Weasel Conductor

GI Wire

11 KV XLPE cable of size 3×185, 3×170, 3×120 sq. mm.

Cable box 3×185, 3×70, 3×120 Indoor & Outdoor

ABC of size (3×120+1×70+1×35) sq. mm.

ABC of size (3×95+1×70+1×35) sq. mm.

ABC of size (3×50+1×35+1×16) sq. mm.

ABC Single Phase of size 1×16+1×25 sq. mm. cable

Replacement of Broken PCC single Pole and Erection of PCC Pole 8.5 mtr long with Grouting & with all accessories

Replacement of Broken PCC double Pole and Erection of PCC Pole 8.5 mtr long with Grouting & with all accessories

Replacement of Broken ST single Pole and Erection of ST Pole 11 mtr long with Grouting & with all accessories

Replacement of Broken ST double Pole and Erection of ST Pole 11 mtr long with Grouting & with all accessories

Re-Stringing of three phase ACSR Weasel Conductor for 11 KV line.

Tilted of PCC/ ST Pole.

replacement of Broken PCC Pole and Erection of PCC Pole 9 mtr long with Grouting & with all accessories

Rebinding of Stay Set Complete.

Laying of 11 KV 3×70/3×120/3×185 sq. mm. XLPE cable by digging of trench size 500 mm wide 900 mm after laying of cable boxing with brick, sand and stone slab.

Erection/Stringing/Sagging and Commissioning of 4×16/4×25 mm cable for ne connection. Cable shall be provided by the contractor at his OWN cast.

Cable hoisting of 11 XLPE Cable on double pole (3×70/3×120/3×185) sq. mm. including jumpering etc. Complete with help of GI Pipe as per RESPO Norms GI Pipe Shall be provided by Contractor

Proper laying & commissioning of 1×16+1×25 sq. mm single phase ABC. Only ABC shall be provided by the department.

Installation of cable box 11 KV Indoor & Outdoor

Proper Laying and Commissioning of (3×120+1×70+1×35) sq. mm. ABC. Only ABC shall be provided by the department.

Proper Laying and Commissioning of (3×95+1×70+1×35) sq. mm. ABC. Only ABC shall be provided by the department.

Repairing of Damage T/F Plinth and including jumpering with the system (All the required martial for above work shall be provided by contractor except T/Fs)Placement of 11/0.4 KV T/Fs with the help of crane sleepers and man power etc. from dump place to newly constructed T/Fs plinth & erection & commissioning of 250/400 KVA T/Fs of

Fabrication erection and commissioning of 25/16/10 KVA T/F on double/single pole with all accessories. All material except 25/16/10 KVA T/F shall be supplied by the contractor.

Construction of retaining wall, fabrication & erection of Wire mesh fencing of size 3 + 3 & 2.0 M height around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm. Wire mesh of size 10 SWG rectangle type, as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost).

Construction of T/F plinth of size 2x2x1.5 m on a padding0.25M deep in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick. Brick work in ratio1:4cement & cores Sand in the hollow portion the sand should be filled from the ground level upto15 centi meter below from the top of wall, Cement, sand & brick Ballasts should be filled up to 15centimeter. Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of1:2:4.The T/Fs plinth should be plastered on all sides12mm thick in ratio 1:6 by cement and cores sand.(All the material to be arranged by the contractor)

Grouting and Nozzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (sand, brick blast & cement). All material except stay wire shall be supplied by the contractor.

Fixing of Ordinary earthing by 11 KV MS earth Rod 2500 mm long as per RESPO schedule.

Stringing of three phase ACSR Weasel Conductor for 11 KV line

Guarding of 33 KV Line

Looping & chopping of tree branches for clearance of HT/LT line after clearance of line throughout pieces of tree branches of site (Approx. 3 Km).

M/S RUDRA CONTRACTOR AND SUPPLIER BAREPUR ANDHARRA HARDOI (BID ID -5176476)

Neeraj Electricals (BID ID -5176034)