PROVN OF INTERLOCKING ROAD FROM BLDG NO T-69 TO P-129 TO T-89 AND 3 UNIRAL AND 01 WC NEAR BLDG NO T-73 IN ASC BN (MT) UNDER GE (EAST) MATHURA

Amount

Excavation in trenches in not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for foundations, laying of cables pipes etc and getting out as in soft/loose soil complete all as specified and as directed.

M&L for spreading and levelling excavated earth in layers n exc. 25 cm thick and well ramming including watering as required complete all as specified and as directed. Note : Excavated earth will be used from serial item No 1.00 here-in-before.

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick complete all as specified and as directed.

Removal of excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for renforced cement concrete 1:1½:3 type A-1 (using 20 mm graded stone aggregates) as in slab supported on walls, Beams, and columns in floor, roof beams, landing balconies, canopies, deck slabs and shelves etc complete all as specified and as directed.

M&L for renforced cement concrete 1:1½:3 type A-1 (using 20 mm graded stone aggregates) as in beams, cantilevers, bressummers, lintel over 1.5 span and similar work complete all as specified and as directed.

M&L for renforced cement concrete 1:1½:3 type A-1 (using 20 mm graded stone aggregates) as in chajjas complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Form work to side and soffits of floor or roof beams haunchings, girders, bressummers, lintels, band, chajjas, contilevers shelves, plinth beam, including supports etc flat for rough finished surface of concrete complete all as specified and as directed.

Form work to soffits of suspended slabs such as roof slabs, floor slab, landing and similar flat work not exceeding 200 mm thick (Horizontal or sloping) for rough finished surface of concrete complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and paving etc. complete all as specified and as directed.

M&L for providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in coping, kerbs, roof padding etc complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 in two layers, first layer 10mm thick and 2nd layer 5mm thick mixed with liquid water proofing compound as per manufacturer instructions surface finished even & smooth without using extra cement complete all as specified and as directed. Note : Liquid WPC shall be measured and paid seperately under relevant item of this BOQ.

M&L for rendering 10mm thick on concrete surface of ceiling in cement mortar 1:3 finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. square complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed.

S&F 150mm long aluminium anodised handles cast type complete all as specified and as directed.

S&F stainless steel Butt hinges 100mm size extruded section complete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed.

M&L for 50 mm thick cement concrete type C-2 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth (without using extra cement) compete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint white or tinted over and including a coat of primer complete all as specified and as directed.

M&L prepration of new plastered surfaces of walls and providing 1mm thick wall care putty to achieve smooth surface and applying two coats of oil bound distember over a coat of alkali resistant primer complete all as specified and as directed.

M&L for prepration of new plastered surface of ceilling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over and including a coat of red oxide primer complete as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 110mm bore bends any radius all as specified and as directed.

S&F PVC (SWR) 75mm bore bends any radius all as specified and as directed.

S&F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal provided with acess door complete as specified and as directed.

S&F PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal provided with acess door complete as specified and as directed.

S&F PVC (SWR) 110 mm bore vent cowl complete as specified and as directed.

S&F PVC (SWR) floor trap plain dia of outlet 75mm with CP grating including jointing with solvent cement complete all as specified and as directed.

S&F bib taps cast copper alloy chromium plated fency type with crutch or butterfly handle, screwed down screwed for 15mm bore dia iron pipe complete all as specified and as directed.

S&F angle stop valves type cast copper alloy chromium plated with crutch or butterfly handle, screwed both ends for 15mm bore dia iron pipe or for unions and fixed complete all as specified and as directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including jointing to socket of flushing rim all as specified and as directed.

S&F PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F vitreous chinaware wash hand basin white flat back size 550x400mm excluding taps, chain but including brackets as erecting stands complete all as specified and as directed.

S&F Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes 20 mm bore dia complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nut of length 450mm complete as specified and as directed.

S&F pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) 750 liters capacity having monkey protection cover hoisted and fixed in position on roof including connections complete all as specified and as directed.

S&F Ball brass valve high pressure with polythene float and fly nuts complete screwed for 20 mm bore dia iron pipes or brass ferrule and fixed complete all as specified and as directed.

S&F waste coupling of 32 mm size chromium plated for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F 20mm bore GI Nipple suitable for HDPE water tank complete all as specified and as directed.

S&F 32mm bore Low density Polyethylene Pipe (LDPE) of pressure rating 6 kgf/cm2 and fittings fixed to WHB, sink complete all as specified and as directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F Vitreous China Urinal, Half stall type of size 375x390x590mm white excluding flushing cistern, flush pipe and waste pipe complete all as specified and as directed.

M&L for Cutting chases pinning in brick walls making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

M&L for 20mm thick granite black (in one single piece) (table rubbed and polished) in steps jambs, pillar, window cills, cooking platform and like laid over and including 10mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and as directed.

M&L for APP based polymeric membrane not less than 3 mm thick, weighing not less then 3.5 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 gm/sqm) and upper side of membrane thermally insulated with white mineral gravel finish, uniformly embeded during manufacturing process, shall be used. It shall be laid by torch application. Side overlaps shall be 75 mm and the ends shall be 100 mm and all overlaps and jointed shall also be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 30cm and then inserted inside the parapet in a grooves.The same shall be finished by a membrane flashing over a coat of cold applied bituminous primer confiming to IS:3384. @ 0.40kg per Sqm complete all as specified and directed.

M&L for cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement and no pigments, machine pressed, set and jointed in neat cement slurry in floor laid over and including 20 mm thick screed bed in cement mortar 1:4 and filling the joints with Tile Max premium cementitious grout material of JK Cement or its equivalent complete all as specified and as directed.

M&L for Brickwork with sub class 'B' old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified.

M&L salt glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed with cement mortar 1:1 complete all as specified and as directed.

M&L Cement concrete 1:4:8 Type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 100 mm internal dia pipe complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping surface channels, benchings, manholes finished even and fair complete all as specified and as directed.

M&L for extra forming fair finished drain or channels 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M&L for pre cast reinforced cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) as in cover slab (for manholes etc) chajja, shelves and similar articles complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately.

M&L 100mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregates) as in sub floors, sub bases, floors and paving etc. complete all as specified and as directed.

M&L for 80mm factory made chamferred edge precast concrete interlocking paver blocks any shape and size of best quality and confirming to IS 15658-2006, M-30 grade with grey cement and pigments with approved colour design & pattern as in footpath, parks, lawn, or light traffic ways of required strength made by table vibratory method using PU mould laid in rquired colour and pattern over and including 50mm thick compacted bed of coarse sand, compacted and proper embedding/laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complete grey cement and pigments complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick wall or concrete surface in cement mortar 1:4 finishing surface even & fair cement complete all as specified and as directed.

M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated (FRLS) cable 1100 volts grade with multi-stranded, copper conductor drawn through and including 20mm dia rigid non-metallic PVC conduit with all acessories such as internal bend end caps etc complete concealed in wall including necessary cutting chases and making good disturbed sufrace to match the existing surface including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistrandered copper conductor cable as earth continuity conductor, including providing fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls with 3mm thick bakelite top cover sheet ISI marked with chrominium plated screws and cup washers for housing the switches, socket outlets, fan regulators etc complete all as specified and as directed for the followings:-

One light/fan/exhaust fan point controlled by one way switch 5 amp complete all as specified and as directed.

S&F ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed.

S&F switch piano type , SP, one way, flush type 5 Amps complete all as specified and as directed.

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F indoor decorative ultra slim surface/Wall mounted LED batten tube light fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired with and including 1 x 20 watt LED tube and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light fitting 1 x 10 watt with LED Tube (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed

Supply and fixing exhaust fan 250mm sweep made of sturdy engineering plastic with built in louvers, AC, 230Volt single phase, 50 Hz, RMP 1400 copper winding complete all as specified and as directed.

S&F sheet metal enclosure MCB distribution board, SPN 4 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F MCB SPN 32 Amps,' C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F MCB SP 6-32 Amps, 'B' series, breacking capacity 10KA, 240V complete all as specified and as directed.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor of size 10 Sqmm 2 core laid in trenches/duct/fixing on walls/poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole/Main Panel Box and testing complete all as specified and as directed. Note:- (i) Quoted rate shall deemed be inclusive of cost of HDPE pipe. (ii) Excavation and earth work shall be measured and paid separately under relevant item(s) of this schedule.

ARCHI ENGINEERS (BID ID -3143420)

M/S ANIL KUMAR (BID ID -3141188)

MAHTAB ALAM (BID ID -3138342)

BHARDWAJ CONSTRUCTIONS (BID ID -3140912)

JWALA ELECTRIC CONTRACTORS (BID ID -3142225)

Ahmed constructions (BID ID -3141684)

Deepak Saxena (BID ID -3142163)

M/S DEV ASSOCIATES (BID ID -3141504)

Karman Infra Projects (BID ID -3142381)