Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹13.2 LAdmitted-Finance 2193 10 A P W T MANIMAJRA CHANDIGARH | -37.69% | ₹13.2 L | L1 | Admitted-Finance |
| 2 | L2₹13.6 L+₹34,614.13 (2.62%)Admitted-Finance 62 DADUMAJRA CHANDIGARH U T CHANDIGARH | NA | NA | 160001 | -36.06% | ₹13.6 L+₹34,614.13 (2.62%) | L2 | Admitted-Finance |
| 3 | L3₹14.2 L+₹93,224.54 (7.05%)Admitted-Finance 1296 SECTOR 41 B CHANDIGARH 160036 | CHANDIGARH | CHANDIGARH | 160036 | -33.30% | ₹14.2 L+₹93,224.54 (7.05%) | L3 | Admitted-Finance |
| 4 | L4₹14.7 L+₹1.4 L (10.7%)Admitted-Finance 621 SECTOR 52 KAJHERI CHANDIGARH | NA | NA | 160001 | -31.00% | ₹14.7 L+₹1.4 L (10.7%) | L4 | Admitted-Finance |
| 5 | L5₹14.7 L+₹1.4 L (10.8%)Admitted-Finance 55 HEM VIHAR BALTANA ZIRAKPUR | -30.99% | ₹14.7 L+₹1.4 L (10.8%) | L5 | Admitted-Finance |
Tender Value
₹21.2 L
EMD Value
₹42,471
Closing Date
17 Sept 2026, 11:00 amClosed
XEN CP3 SEC 16 CHD
O/o XEN CP3 SEC 16 CHD
Annual Repair AND Special Repair for Type- I,III, IV, X, XI, XII AND XIII Houses in Sector- 7 Chandigarh Under M-1 Sub-Division( 514 No Houses) (F.Y. 2026-27)
2026_CHD_95275_1
CP3/2026/3090784
Open Tender
Civil Works
Percentage
120 days
SECTOR 7 CHANDIGARH
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹42,471
21 Sept 2026
9 Sept 2026
17 Sept 2026
9 Sept 2026
17 Sept 2026
9 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) | 5.94 | Cum | 9,092.05 | ₹54,006.78 |
| 2 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | 2.98 | Sqm | 1,093.46 | ₹3,258.51 |
| 3 | Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (MARBLE). | 6.75 | Sqm | 2,554.95 | ₹17,245.91 |
| 4 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm | 15 | Each | 283.48 | ₹4,252.2 |
| 5 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm | 10 | Each | 295.06 | ₹2,950.6 |
| 6 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | 10 | Each | 253.56 | ₹2,535.6 |
| 7 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm | 10 | Each | 112.04 | ₹1,120.4 |
| 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm | 15 | Each | 80.32 | ₹1,204.8 |
| 9 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm | 10 | Each | 62.95 | ₹629.5 |
| 10 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete : 125 mm | 25 | Each | 64.46 | ₹1,611.5 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.23 MB
BOQ_117014.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .