SPL REPAIR TO BLDG. NO 192 (08 X MD ACCN) AND ADDN/ANTN TO BLDG. NO P-130 (OPS ROOM) AND PROVN OF 02 X SPLIT AC AT HQCC UNDER GE (EAST) LUCKNOW

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any position not exc 15 cm thickness below and above ground level, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position as in roofs, floors (other than ground floors) and similar works complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in in CM (1:6) complete all as specified & directed.

M&L for brick work using old size fly ash brick, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

All as item No 6 above but except bricks (Note:- Old brick as obtained from Item No 4 above)

M&L for brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 2% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. (Note : - water proofing compound shall be measured and paid for separately 'Only').

M&L for 40mm thick in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as roof padding finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/ tint over a coat of primer complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified and directed

M&L for 10mm thick rendering in CM 1:3 on concrete surfaces of wall, rough finished complete all as specified and directed.

Supply only integral water proofing compound, ISI Marked complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work of approved shade/tint over a coat of primer by using roller complete all as specified & directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for applying two coats of wall care putty on walls overall thickness 3mm and finished surface even and smooth, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

Complete removal of existing treatment on wall and applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceilling and applying one coat of white washing on ceilling complete all as specified and directed.

M&L for preparation of old previously treated surfaces of wall and applying one coat of white wash on walls complete all as specified and directed.

M&L for applying three coat of white wash including preparation of new plastered surface of wall, complete all as specified and directed.

M&L for complete removal of exiting treatment and applying two coats of oil bound distemper over one coat of wall care putty of wall including preparation complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc complete all as specified and directed.

S&F coloured non skid edge cut (joint free) ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc set and jointed in white or coloured cement to match laid over 15mm thick screed in CM 1:4 complete all as specified and as directed.

M&L for non skid coloured ceramic tiles, joint free 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors with borders, incl over 15mm thick screed bed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 600x300x7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and directed.

Dismantling of stone slabs and tiles laid in bedded cement mortar of any description or thickness in floors, aprons etc, complete all as specified and directed.

M&L for machine cut kota stone slab flooring of 20-25mm thickness over 15mm screed bed (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and including granite polish on Kota slab stone complete all as specified and directed.

All as per item No 32 above but except stone.

All as per item No 32 above but on vertical surface such as dado, skirting etc over 10 mm thick rendering in CM 1:4

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.

Forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade "A." complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like, over 20mm thick screed bed in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform incl making hole for gas pipe and other similar situation complete all as specified and directed.

M&L for supply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/sqm laid on a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm for sunken tratment complete all as specified and directed.

Taking down loose filling of aggregate in any from sunken slab and refiiling after treatment complete all as specified and directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc 20cm girth complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 15mm bore tubes "medium grade " galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.(Note:- Old GI tubes obtained from Item No 41 shall be used)

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 20mm bore tubes "medium grade " galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S&F in repair vitreous vanity cabinet with china table top Wash Hand Basin of size 635 x 430 x 800 mm with bottle trap complete all as specified and directed.

S&F in repair vitreous china wall hung WC, UF seat cover, hinges, accessories set of size 360 x 570 x 360 mm fixed to wall/floor with P/S trap complete all as specified and directed.

S&F single piece slim concealed cistern body with installation kit & S type, drain pipe, connection set for wall hung WC complete including connection with GI pipes or connection pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.

S&F sink made of stainless steel 0.8mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 600mm x 460 mm with bowl size 590mm x 430mm x160 mm including 40mm bore PVC waste fitting suitable for sink with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B-0, complete, including taking down old unserviceable sink complete all as specified and directed.

S&F for stainless steel kitchen plate rack of overall size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.63 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

S&F CP grating 125mm dia with waste hole complete all as specified & directed.

S&F CP grating 125mm dia without waste hole complete all as specified & directed.

S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified & directed.

S&F PVC connection of 15mm bore, 600mm long with brass coupling on both ends of superior quality complete all as specified and ditected.

S&F in repair 15mm bore bib tap long body, fancy type, chromium plated, cast copper alloy, with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F of 15mm dia CP angle valve to control water suitable for jet cleaner complete all as specified & directed.

S&F health faucet (ABS Body) with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed.

S&F in repair CP angle valve, fancy type long body for 15 mm bore pipe with capstan head long screwed shank including CP cover plate complete all as specified & directed.

S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes, complete all as specified and directed.

S&F for 5 mm thick glass corner shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed.

S&F towel ring 200mm dia superior quality complete all as specified and ditected.

S&F CP brass toilet paper holder fixed to wall with chromium plated brass screws of approved quality complete all as specified & directed.

S&F soap dish CP fixed with and including chromium plated brass screws complete all as specified and directed.

S&F 40mm bore PVC low density (LDPE) pipe of pressure 6kg/cm2 fixed to wall or laid in floor, complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified & directed.

Dismantling RCC/PVC water tanks and removing for capacity exc 250 litres & not exc 500 litres etc complete all as specified and directed.

S&F 500 Litre capacity rotational moulded polyethylene water storage tanks, white colour, Triple layered (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, complete all as specified and directed.

S&F PVC coated 25mm dia Mild steel pipe as in curtain rods includin brackets and fancy type end knobs, complete all as specified and directed.

Demolition and breaking up or taking down PVC/AC/CI/SSW 110mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor wall PVC holding clamps including demolition and breaking up old pipes , complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor wall PVC holding clamps including demolition and breaking up old pipes, complete all as specified and directed.

S&F PVC (SWR) floor trap of size 110mm, complete all as specified and directed.

S&F for 110mm PVC (SWR) WC connector bent type, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc 4 sqm each, complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutter from the frame) and area not exc 1.5 sqm each, including iron mongry and cutting holes for hold fasts and making good complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed.

Taking down shutters of any description not exc 1 sqm each complete all as specified and directed.

M&L in repair framed work as in cupboards, gates angle, sheet ot other section etc complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L plain cement concrete cast in situ 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in copings, hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as spcefied and directed

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. complete all as spcefied and directed

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast, etc.complete all as specified and directed

S&F for 30mm thick factory made flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as specified and directed

S&F for 35mm thick factory made glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkhat, complete all as specified & directed.

S&F of 12mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face complete all as specified & directed.

M&L for wooden boarding first class hard wood 25mm thick as in floors plained one side with butt joints and fixed with secret nails for repair to existing floors in patches, including cutting cutting out, piecing , heading joints etc. complete all as specified and directed.

M&L for in repair block board, 19/20mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work as in cup board shutter/shelves/cabinet etc, complete, all as specified and directed.

M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per manufacture's instructions complete all as specified and directed.

S&F in repair kitchen cabinet shutter with frame including shelves, drawer made of solid PVC Block board18/ 19 mm thick one sides decorative face and balance side white having smooth outlet integral skin are made and shall be fixed to walls using required size sheet metal screw and solvent adhesive vertical and horizontal profile made of PVC 18/19mm solid board profile complete all as specified and directed.

M&L for external teak wood lipping, 6mm thick fixed with nail, complete all as specified and directed.

M&L magnet ball catcher for cup board shutters, complete all as spcefied and directed.

S&F for clip type stainless steel self closing hinges for cabinets fitted with cadmium coated screws complete all as specified and directed.

M&L for 100mm size stainless steel fancy type handle, complete all as specified and directed.

S&F for 100 mm long Hasp & staple, safety type, stainless steel with mild steel hinges pin including bolt to hinges plate & fixed with screw, complete all as specified and directed.

S&F PVC solid door frame of size 50x47mm made out of 5m plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and directed.

S&F for factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per pecifications & drawing complete all as specified and directed.

S&F in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and directed.

S&F butt hinges of size 75 mm medium weight, stainless steel ISI marked complete all as specified and directed.

S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the lik, articles of 2nd class hardwood, articles not exc 200 cum each complete all as specified and directed.

Dismantling of steel windows/ventilators without taking off shutters, complete all as specified and directed.

S&F for powder coated alumium glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rails 100x44mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and including glazing by using 5mm thick plain sheet glass and stainless steel wire mess of dia 0.36mm and aperture 1.4mm, complete all as specified and directed. (Note-glazed shutters glass thickness shall not be less than 5.00 mm and wiremesh shutter with SS wiremesh as approved by GE is also included in the item. No extra payment will be paid separately)

S&F for power coated aluminium frame for doors, window, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

S&F of powder coated of any colour aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified and directed.

S&F for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F for powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 No.) complete all as specified and directed.

S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing/ paneling, C P brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.

S&F of prelaminated particle board of 12mm thick, exterior grade, prelaminated both side with decorative choice lamination ,fixed with beading to aluminiume frame work etc complete all as specified & directed.

S&F of 4.80mm thick sheet glass,ordinary quality with frosted on one sideand glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the new surfaces, complete all as specified & directed.

S&F 4.80mm thick black reflactive glass with ordinary quality and glazing with oil putty in square exc 0.5 sqm in each panecomplete all as specified & directed.

S&F of aluminium body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. complete all as specified and directed.

S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty complete all as specified and directed.

S&F mild steel framed work such as grills, guard bars, barrel iron doors, cooler stand, framework of water tanks and similar works, conforming to Grade E-165 (Fe 290), including welding etc. complete all as specified & directed.

S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified and direced.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains, coping and benching including necessary formwork wherever required complete all as specified and directed. (Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately Only).

M&L for 60mm thick pressed precast concrete interlocking paver block reflective type, rubber moulded coloured of M-35 mm grade over 25 mm thick sand cushion as in floors complete all as specified and directed.

All as per item No 141 but except paver block.

M&L for sand filling in floors or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed

S&F for woodlot FR Grades of size 2430x131x16mm made of exterior grade HDF backed with acoustical having excellent noise absorption 0.88 NRC as per ISO 354. 15mm Aluminum profile conforms to Aluminum Alloy 6063-T 6.Temper as per BS: 1474-1987 and GI Lock in clips on the back of tongue and Groove system. Density per panel is 750-800 kg/m3. The panels come with tongue & groove for seamless patterns, 4-28mm Groove and visible panel. The perpendicular holes are available on the back of panel which are covered by black acoustical fleece.Installed on G.I studs 600x600mm center to center 2400mm X50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified & directed.

M&L for precast RCC 1:2:4 type B-0 (using 20mm graded stone aggregate) as in Chhajjas, cover slab, shelves and similar articles set in CM 1:4 complete all as specified and directed. (Note:- RCC shall be measured & paid separately Only)

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer of roofs complete all as specified and directed.

M&L for striping out old roof treatment (tarfelt) from roof top and removing from site, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges, complete all as specified and directed.

M&L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) 10 mm thick plastering in CM (1:4) using 100 % coarse sand on roof / parapet walls with WPC @ 2 % by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 Kgs/Sqm on prepared surfaces and allow to dry. (c ) Applying a coat of hot blown bitumen 85/25 grade @ 1.20 Kgs/Sqm over primer. (d) Supply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm. (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kgs/Sqm . (f) Blinding with dry coarse sand @ 0.50 to 1.0 Kg /Sqm dusted over bitumen. (g) Supply and laying Sub class B Bricks tiles 40 mm thick over and including 15 mm thick screed bed in CM(1:4) and jointing and pointing in CM (1:4) by mixing linsead oil @ 5 % weight of cement. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.

All as per item No 151 but except (g) on vertical surfaces.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, includingcover fillets complete all as specified and directed.

S&F in repair 12mm thick plain Gypsum board false ceiling with GI frame work including all necessary drilling , cutting to fix electrical items as under:- (a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450mm centre to center alongwith perimeter of walls. (b) GI sheet channel made to shape 50x40x40mm of 24 gauge placed @ 600mm centre to centre from perimeter of wall except long wall (in one span) (c) GI sheet intermediate runners of size 45x10x10mm of 24 gauge fixed @ 1200mm centre to centre leaving frame of one side wall (in other span) (d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200mm centre to centre incl plugging in RCC slab. (e) Fixing of 12mm thick gypsum boards, filling joints with POP and finishing complete with two coats of oil of plastic emulsion paint over one coat of primer on ceiling complete all as specified and directed.

Provinding & fixing with fully perforated 12mm thick micro tegular edge false ceiling at all heights with GRC (Glass Fibre Reinforcement Gypsum) false ceiling tiles of size 595x595mm of approved texture,design and patterns having moisture content less than 2%,humidity resistance of 99%,NRCO0.50 to 0.75 as per IS 8225:1987 Noncombustible as per bs 476 (part)-1970 and light reflectance of 85%(min to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33 thick (galvanized@120 grams per sqm incl both sides ) comprising of main T runners of size 15x32mm of length 3000mm,cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to form grid moudle of size 600x600mm suspended from ceiling using galvanized mild steel items9galvanizing@80gms per sqm) i.e.50mm long,8mm outer diameter M-6 dash fasteners,6mm dia fully threated hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.4mm of length 3000mm to be fixe on periphery wall/partition with help of plastic rowl plugs at 450mm center to center and 40mm long dry wall srews the work shall be carried out as per specification complete all as specified and directed.

S&F of elegant fabric tile made of perforated cement fiber composite 600X600/600X1200X5mm with square edge density 1050kg/m3 covered with fabric on the front side and Acoustics fiber on the back side,water resistance, and fire resistant absorptioncoefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and are installed with Aluminum H Profile on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm 1000 GSM thick absorbwool tested as per Fire Retardant IS 15061-2002 for excellent results etc complete all as specified

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per item No 158 here-in-before but one bell point controlled by one bell push, 06 Amp.

All as per item No 158 here-in-before but one, two way light point controlled by two, two way switches, 06 Amp.

All as per item No 158 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per item No 158 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Item No 158 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix switch piano flush type, 06 Amp, single pole, two way, 230 volt complete all as specified & directed.

Supply and fix bell push, flush type, 06 Amp, 230 volt complete all as specified & directed.

Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.

Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix ding dong bell, AC, 230 volt, single pole complete all as specified & directed.

Supply and fix electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed

S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed

S&F Modular White cover plate with frame,12 module complete all as specified and as directed

S&F Modular White cover plate with frame,8 module complete all as specified and as directed

S&F Modular White cover plate with frame,3 module complete all as specified and as directed

S&F Modular White cover plate with frame,6 module complete all as specified and as directed

S&F Modular Metal flush box 12 module complete all as specified and as directed

S&F Modular Metal flush box 8 module complete all as specified and as directed

S&F Modular Metal flush box 3 module complete all as specified and as directed

S&F Modular Metal flush box 6 module complete all as specified and as directed

Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

Supply and fix in replacement of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9/10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed.Make :Philips, Cat No : 30575 (Comet) or equivalent in Havells, Cat No : LHDL06160099 (CITY 3).

Supply and fix in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed. Make : Crompton, Cat No : LBHE-10-CDL or equivalent in Havells, Cat No : RUGBYNEONFT10WLED760SSYMBOPC, PHILIPS Cat no WT202WLED6SCWPSUS2PC

Supply and fix in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,Philips cat no TMC 501P1XT-LED22W P 3241

Supply and fix in replacement of single side connection LED T8 tube light rod 8 Watt, 6500K of two feet long into and including LED tube light fixture of two feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed.Make : Crompton, Cat No : DMLN1LT8-8& LT8-8-865-2 or equivalent in havells / Philips

Supply & fix LED wall/surface mounted down lighter, 12 W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified.Make:- Crompton Model-LCDSPLN-R12-CDL or equivalent in Havells/Philips/Bajaj

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard-II for BER procedure complete all as specified & directed.

Material and labour for sub main wiring with 16 Sq mm nominal cross sectional area, four single core, (4 run)1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 16 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Supply and fix in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.

Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :-Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No : NCN106N to NCN132N or Schneider, Cat No : A9N1P06C to A9N1P32C.

Supply and fix in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :-Legrand, Cat No. 4086 36 or equivalent in Hager, Cat No : NCN232N or Schneider, Cat No : A9N2P32C

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed.

S&F exhaust fans, plastic body, AC, single phase, 230/240 v of size 200 mm sweep with louver and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed

Supply and fix wall fan 400 mm sweep , PVC body, 230V, single phase complete all as specified & directed.

Cutting walls any type, making holes for fixing of exhaust fan of any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed

Taking down electric meter and refixing on same board after rewiring complete all as specified and directed

Supply only LED bulb 9/10 Watts suitable for B22 white in colour complete all as specified and directed

Supply and fix PVC cable tray light weight of min thikness of 1 mm and width 150mm complete all as specified and directed

Supply and laying synthetic rubber insulated mats 2 mm thick for voltage upto 3,3 KV for eletrical purpose as per IS15652-2006, suitable for electrical shock safety of sizes 2mx1m complete all as specified and directed.

Supply and fix LED ceiling ressed mounted ceiling lights fittings 15W higher energy saving decorative ultra slim square/ round profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed

Supply and fixing MCCB, 4 pole 415 V , 160 Amp , 25 kA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply, fixing and testing ON- LOAD changeover switch 4 pole, 160 Amp working in 3 phase supply , 430 v complete all as specified & directed.

Supply, install & testing hi wall (hot & cold) split air conditioner units indoor/outdoor complete with cordless remote control unit and with in built air ionizer, auto clean filter indoor sound level 32 db, front panel display, wireless LED remote and plasma filter for better indoor air quality with minimium 3 star rating and EER 3,2 of capacity 2,0 Ton complete all as specified & directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified & directed.

QUALITY CONSTRUCTIONS CO

Rakesh Traders

M/s Sudhir Enterprises

M/S RAJ INTERIORS

B.S.S.ENTERPRISES

abhinish traders

KUMAR ENTERPRISES

M/S KAUSHIK CONSTRUCTION

ANIL CONSTRUCTION

R P construction company