Constrution of Concrete Road At Pingali Bk To Satrewadi V.R 76 Ch 0/00 To 2/000 KM.Tal Man Dist Satara

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. By Mechanical Means. Item / Page No : 11 / 23 Specification No : MORTH-301 Spec. Page No : 45-53

Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at optimum moisture content, carraige of mixed material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401. - Plant Mix Method and grading - I material. Item / Page No : 1 / 27 Specification No : MORTH-301, 305, 401, 902, 112 Spec. Page No : 45-53, 63-77, 109-111, 417-421, 19-21

Providing and laying in situ cement concrete M-30 with tremix treatment for 200 milimetre thickness for concrete road including laying plastic sheet of 125 micron thickness with groove cutting of 4 milimetre wide and 20 milimetre deep with necessary refilling with polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (excluding reinforcement) with coarse and fine aggregate using V.S.I. quality artificial sand excetra complete. Item / Page No : 22b / 45 Specification No : MORTH 602 Spec. Page No : --- Additional Specifications : 1. The work shall be carried out as per instructions of Engineer in charge. 2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing in position thermo mechanically treated FE 500, tie bars precoated with anticorrosive epoxy paint, of 12 milimetre diameter 70 centimetre long and at 30.00 centimetre center to center and wherever directed including handling, straightening, wrapping with paper of approved quality for half length, necessary cutting, handling, supported by assembly of thermo mechanically treated FE 500 chairs with proper alignment, excetra complete. Item / Page No : 16 / 43 Specification No : MoRTH 602 Spec. Page No : ---

Supplying hard murum / kankar at the road site, including conveying and stacking, excetra complete. Item / Page No : 29a / 25 Specification No : MORTH-408 Spec. Page No : 139-142

Spreading hard murum / soft murrum / gravel or kankar for side width, excetra complete. Item / Page No : 30 / 25 Specification No : MORTH-408 Spec. Page No : 139-142

Sieve Analysis Test for Metal below 40 milimetre 1 Test per 100.00 Cubic Metre

Flekiness Index / Elongation Index Test for Metal below 40 milimetre 1 Test per Source

Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial and Final), Compressive Strength, Soundness Test for Cement 1 Test per 50.00 Metric Ton

Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Artificial Sand 1 Test per Source

Compressive Strength of Cement Concrete Cube 1 Test for quantity upto 5 cubic metre, 2 Tests for quantity above 5 cubic metre and upto 15 cubic metre, 3 Tests for quantity above 15 cubic metre and upto 30 cubic metre, 4 Tests for quantity above 30 cubic metre and upto 50 cubic metre. For quantity 50 cubic metre and above - 4 Tests + 1 Test for each additional 50 cubic metre

Concrete Mix Design (with all tests on basic materials) for Grade M-30 1 Test per 500.00 Cubic Metre

Sieve Analysis Test for Hard Murrm 1 Test per 100.00 Cubic Metre

Liquid Limit and Plastic Limit for Hard Murum 1 Test per 250.00 Cubic Metre

Providing and fixing Road junction / Information sign board of size 1.20 metre X 0.90 metre prepared on 16 gauge mild steel sheet with angle iron frame of size 35 milimetre X 35 milimetre X 5 milimetre with cross bracing of size 35 milimetre X 35 milimetre X 5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro-reflective sheet Engineering grade, border / letters / numeral /arrows, coated with non pealable crystal clear protective transperent coat retaining 100 percent reflection including two angle iron post of size 65 milimetre X 65 milimetre X 6 milimetre of 3.65 metre long inflated at bottom drilled on top and painted in whiteand black bands of 30 centimetre. with 4 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with M-20 cement concrete of 60 centimetre X 60 centimetre X 75 centimetre size as directed by Engineer-in- charge, excetra complete. Mild Steel sheet with Engineering grade. Item / Page No : 55 / 67 Specification No : MoRTH-801 Spec. Page No : --- Additional Specifications : The work shall be carried out as per instructions of Engineer in charge.