Providing LED Street Security Lights in Campus of 174 Nos BOPs along Indo Pakistan Border (IPB) and Indo Bangladesh Border (IBB) SH Providing LED Street Light Security Light in Campus of BOPs under Meghalaya Frontier

Cat (A) -Items to be supply and installation

Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 4 x16 Sqmm armoured cable direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 4x16 Sqmmarmoured cable in the existing RCC/ HUME/ METAL pipe as required.

Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 4x16 Sqmm armoured cable in the existing masonry open duct as required.

LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powdercoated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 Hz,Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen aintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (A) 100watt

Supplying and fixing of 30Watt all in one LED solar light having technical specification .Power output of PV Module ≥ 75 Wp at16.4 ±0.2 Volt at STC ,Type of PV Module -Only indigenous modules of IEC Tested used.Crystalline high power/effi ciency cells used in the solar photovoltaic module with Certification / Report-Certifi ed by MNRE/NABL authorized test centeras per latest edition of IEC 61215 edition II / IS14286 with Minimum warranty period for PV Modules (in Years)- PV module warranted for output wattage ≥ 90%at the end of 10 years and 80% at the end of 25years,Battery capacity ≥ 12.8 V(nominal), 30Ah at STC (1dayautonomy),Type of Battery-Lithium Ferro Phosphate battery (LiFePo4).Operating from dusk to dawn first four hour full brightness, rest of the time at lower level, with motion sensor,battery cycle-Battery cycle life 2000 cycle at 80 % discharge,Type of LED (Light source) 30 WattWhite LED type,LED chip Effi cacy (Lumen/watt) ≥135,Luminaire System Effi cacy - Lumen output -≥120 (Lumen/watt),Ingress protection IP65 or better.Make- Crompton/Havells/ Axxontech or MNRE approved make