Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹38.2 L+₹3,309.70 (0.09%)Rejected-Finance FLAT NO 02 RUTUPARNA APARTMENT PLOT NO 36 S NO 324 2A NEAR G D SAWANT COLLEGE PATHARDI NASIK 422 010 | NASHIK | MAHARASHTRA | 422010 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹38.6 L+₹40,254.50 (1.05%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹40.4 L+₹2.2 L (5.75%)Rejected-Finance SHOP NO 2 JANKI PLAZA BHAGWAN MAHAVIR PATH KOPARGAON AHMEDNAGAR MAHARASHTRA 423 601 | KOPARGAON | AHMEDNAGAR | MAHARASHTRA | 423601 | L4 | Rejected-Finance Not Lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical WLR (No) of CESC 800020/WLR/S TO D/Mar 2023/25/E8 dt 03 Jul 2023. |
Tender Value
₹40.6 L
EMD Value
₹81,200
Closing Date
5 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP ComplexNear AOP Gate PO Gandhinagar Nasik 422006
As per Tender documents
2023_MES_612129_1
GE/NRC/8996/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹81,200
Yes
13 Oct 2023
8 Aug 2023
7 Sept 2023
8 Aug 2023
5 Sept 2023
22 Aug 2023
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil etc
Excavation in trenches in any type of soil, n. exc. 1.5m wide and n. exc. 1.5m deep and getting out complete.
M&L for PCC(1:4:8) type D-2 using 40mm graded stone aggregate in foundation mass concrete and filling complete.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter etc all as specified and directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for foundations, including rafts, footings, foundation beams,plinth beams, bases for column etc using 20mm graded aggregates all as specified and directed.
Formwork to sides of pillars,posts, struts, piers, columns and stanchions etc all as specified and directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for Columns, pillars, piers, posts and struts etc using 20mm graded aggregates all as specified and directed.
Formwork to sides of concrete in lintels, cantilevers, shelves etc all as specified and directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for beams, cantilevers, bressummers, lintels over 1.5m span etc using 20mm graded aggregates all as specified and directed.
Formwork to chullah hoods, chajjas,troughs and similar items including edges etc all as specified and directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for chajja etc using 20mm graded aggregates all as specified and directed.
Formwork to soffits of suspendedslabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) etc all as specified and directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like etc using 20mm graded aggregates all as specified and directed.
Formwork to staircases with sloping or stepped soffits including risers and stringers etc all as specified and directed.
M&L for providing reinforced cement concrete (in M-25 Design Mix) for stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings etc using 20mm graded aggregates all as specified and directed.
M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc.
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc.
M&L for works with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:6.
M&L for Removal of surplus excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil
M&L for 15 mm thick rendering on brick work or concrete surface in two layer, in cement mortar 1:4 mixed with water proofing compound 200gm per 50Kg weghit of cement, surface finished even and smooth without using extra cement complete.
Supply only integral water proofing compound complete.
M&L for 12 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete.
M&L for 5 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth without using extra cement complete.
M&L for Moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete.
M&L for broken stone hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled / rammed to a true surfaces complete.
M&L for 40mm damp proofing course in cement concrete 1:2:4 Type B-0,horizantal or vertical surface including necessary formwork.
M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base , surface finished even and fair without using extra cement complete.
M&L for 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub base , surface finished even and fair without using extra cement complete.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in alternate ways, surface finished even and smooth using extra cement complete.
M&L for 8 mm to 10mm thick double charge vitrified ceramic tiles as in flooring, skirting or in any position and any shape. Area of each tiles not exc 0.36 sqm set & jointed in neat cement slurry and pointed in white or coloured cement to match. As per manufacturing companies catalogue the size, shade, series of tile shall be approved by GE complete all as specified and directed.
M&L for non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.
M&L for Digital tiles 600x300x 6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for 25mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking/wash basin platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for reparing of newly plastered/concrete surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces
M&L for applying a birla wall care putty on wall as per manufacturer"s instruction complete all as specified and as directed.
M&L for applying two coats of oil bound distemper on wall including preparation of surfaces complete.
M&L for preparing of newly plastered surfaces of ceilingss and applying two coats of white wash complete all as specified and directed by the Engineer-in-charge
M&L for 10 mm thick plaster in one layer in CM (1:3) over concrete roof padding, cement mortar mixed with and including chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD mixed in proportion 200 millilitre per 50 Kg cement or STP No. 1 (Liquid) of STP Ltd. in proportion 200 ml per 50 Kg cement as per manufacturers instructions laid when concrete is still green and finishing the surface fair and even without using extra cement complete.
M&L for Waterproofing on roof including flashing and junctions of parapet,kerb, wall etc.as under :- (a) Cleaning of plasetered roof,parapet,facia surface and applying one coat Oil based cold bituminous primer @ 0.70 kg per sqm. (b) Laying a layer of APP based polymeric membrane,3 mm thick(minimum),weighing not less than 3.60 kg/Sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.40 litre/Sqm of density at 25 degree Centigrade 0.87-0.89 Kg /Litre and viscosity 70-160cps or cold sticker, application of APP modified membrance shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100 mm on the longitudinal direction. (c) Painting the exposed APP membrane surface with bitumastic aluminium paint @ 0.15Kg/Sqm. (d) APP membrance,Primer and bitumastic aluminium paint shall be of same brand as per approved by GE.
Supply and fixing position suspended false ceiling system using T-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24x3600mm, cross tee25x24x600mm/ 25x24x1200mm and wall angle 24x24x2540mm( thickness of the materail of 0.30mm). using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 6mm dia GI bar hanged from the purlins of the roof with butter fly clips complete all as specified and directed by Engr-in-Charg.
M&L for powder coated aluminium window or ventilator with shutters frame made with section 44x44x2mm thick style rails of shutters with section 44x44x2mm thick including 10mm size aluminium butt hinges 02 Nos in each leaf, 5mm thick tinted glass pane as inserted including jointing cleats, glazing clips, rubber packing aluminium anodized beading, screws etc; aluminium tower bolts 100mm size each leaf, hooks and eyes ‘D’ fabricated aluminium handles 100mm size, frame fixed in openings with hold fast of 25x3mm flats, 150mm long 04 Nos in each frames including cutting holes in brick work and embedded in PCC (1:2:4) bed block size 150x150x150mm each and match the existing surfaces complete all as specified and directed.
S&F of aluminium grills, fixed with ‘F’ channel, DG-104 pattern, 5.50 mm thick and fixed to window complete all as specified and directed.
S&F for powder coated aluminium (minimum 50 micron powder coated) door chowkats/frame made with aluminium section of size 100x44x2mm thick, and frames fixed in opening with hold fasts of size 25x3mm flat 150mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm each and match the existing surfaces complete all as specified and directed.
S&F for powder coated aluminium (minimum 50 micron powder coated) shutter, aluminium section of size vertical styles & top rail of shutters with section 84x44x2mm thick and middle & bottom rail of shutters with section 112x44x2mm thick including 5mm thick tinted glass pane at top and 12mm thick both side pre-laminated board at bottom pane inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc; floor hinges, aluminium tower bolt 200mm long-02 Nos., mortice lock 100mm size 4 lever, 100mm dia disc handles etc complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading complete all as specified and directed.
S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates with and including necessary fixing lugs, stainless steel hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer, including taking down with existing one all as specified,incl fixing of holdfast complete.NOTE:- During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.
S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides particle board core including two coat of synthetic enamal paint over one coat of pink primer all as specified and directed by Engr-in-charge. NOTE :- All screws shall be self tapping chrome plated .
S&F 35mm thick 2nd class Hard wood glazed and skelton shutters open rebated and prepared to receive glass gauze (Without sash bar ) etc as specified in SSR Pt- I Sec -8 clause 8.20 (a) complete all as specified and directed.
S&F Galvanised stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.
M&L for preparing of new wooden surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint,over one coat of pink primer complete all as specified and directed by the Engineer-in-charge
S&F butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed for the 100mm sizes complete.
S&F stainless steel handles cast type, anodised complete for the 125mm size complete.
S&F stainless steel tower bolts with plate, staples and bolt of extruded section and fixed for the 450mm sizes.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
S&F 250 mm stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.
S&F in repairs Door closer hydraulically regulated, aluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed.
S&F in repair 25mm dia medium weight, stainless steel as in drapery rod complete all as specified and directed.
S&F stainless steel brackets colour and design as approved suitable for curtain rods of 25mm dia complete all as specified and direcdted.
S&F stainless steel knobs colour and design as approved suitable for curtain rods of 25mm dia complete all as specified and direcdted.
Supplying, fixing, jointing and testing galvanised iron tube, medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid in floors of size 15 mm dia.
All as per Item No. 62.00 as above but 20 mm dia
All as per Item No. 62.00 as above but 25mm dia
Cutting chases, pinning in, making good to facings where required and pointing in cm 1:3 for concealed water tubing etc and making good, cutting n. exc. 10 cm width complete.
S&F 40 mm bore of pipe un-plasticised PVC of pressure rating 10 kgf/Sq cm fixed complete to wall, ceiling, or in floors complete.
S&F PVC (SWR) pipe single socketed in any length with rubber ring, laid in trenches, wall including complete for the 75 mm bore complete all as specified and directed.
S&F cast iron nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe and fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate complete..
S&F rotational moulded polyethlene water storage tank 1000ltrs capacity (cylindrical vertical with closed top) hoisted and fixed including necessary brass float valve in position all as specified and as directed.
S&F Vitreous China EWC (without seat Cover) size 630mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete.
Supply and fixing plastic sheet cover closed pattern with flat bottom and cover including chromium plated hinge device complete all as specified and directed by Engr-in-Charge.
S&F 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC pipe 600 mm long complete.
S&F vitreous china wash bowl type hand basin white, flat back of size 550mmx400mm fixed on and including fixing in garinte platform 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete. Note :- Pillar tap shall be measured as supply only under respective item
Supply only PVC connection 15 mm dia and 450 mm to 600 mm long with brass fly nut at both ends complete.
Supply only pillar tap brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts complete. Make : Plumber Cat Part No. ECV-0105 or equivalent in Marc.
S&F 15 mm bore bib taps, chromium plated cast copper alloy, high pressure screwed down, screwed for iron pipe or for brass ferrule, complete. Make : Plumber Cat part No ECV-0205 or equivalent in Marc
S&F in repairs 32 mm dia of flush pipe for low level cistern as in repair complete all as specified.
Supply and fixing in repairs 32 mm dia bore PVC flexible pipe complete all as specified.
S&F for 125mm chromium plated shower roses with or without swive joints any size including fixing to stell pipe etc
S&F Health facuet (ABS body) mild steel chromum plated suitable for 15mm dia pipe with 1.25mm long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed by Engr-in-Charge.
S&F for 15mm brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed with wall etc
S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in 20mm bore complete all as specified and as directed.
M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregates as in coping /channels complete all as specified and directed.
M&L for pre-cast RCC 1:2:4 type B1 using 20mm graded stone aggregates as in cover slab/MH cover complete all as specified and directed.
M&L for works with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:4.
S&F 75mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors
M&L for reinforced concrete pipe class NP3, laid and joined complete with collars 150mm bore of pipe.
M&L for concrete bed to drain pipes 150mm bore incl. Packing under ,and hunching against the sides of pipe after they are laid and tested in cement concrete 1:36 type C-2 (Using 40mm graqded aggrregate )
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
M&L for rendering 15mm tick in CM 1:4 mixed with integral water proof compund 3% wt of cement as per manufacture instructions on fair faces of wall ,finished even and smooth using extra cemen complete all as specified and directed. Note:-(Water proofing compound will be measured and paid separately)
M&L for 100mm thick PCC 1:4:8 Type D-2(using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and as directed.
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment incl 20 mm thick sand cushioning below paver block complete all as specified and directed
M& L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing caping (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2 mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point / one fan point controlled by one, one way swtich.
All as per Item No.93.00 as above but One ceiling/ exhaust fan point controlled by one, one way swtich.
All as per Item No.93.00 as above but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per Item No.93.00 as above but on independent board.
All as per Item No.93.00 as above but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.
Supply and fixing of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.
Supply and fixing of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
Supply and fixing of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
Supply and fixing of switch socket combination multipurpose flush type universal 2 in 1 type (3 and 3 pin) 5/15 Amps, 230V, AC.
Supply and fixing of ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.
Supply and fixing of connecting up fan regulator electronic on existing phenolic laminated sheet socket type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep.
Supply and fixing lamp holder insulated body with back plate for angle holder including 9 watt LED lamp all as per specified and directed by Engineer in Charge.
Supply and fixing LED tube light fitting 20watt, 4 feet, PVC extruded batten complete with retrofit T8 Polycarbonate tube with connector block, etc. complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size.
Supply and fixing ceiling fan 1200mm sweep, AC, 230 volts with blades, down rods complete with brushless direct current motor (BLDC) motor, five star star rated, value 6.00 BEE and including connecting up with three core twisted flexible copper conductor cable with suitable size.
Supply and fixing Exhaust fan 300mm sweep, Heavy duty, 1400 RPM, AC, 230 volts with louver complete making hole suitable for Exhaust fan 300 mm sweep complete with plastering to disturbed surfaces and making good with plaster and applying distemper paint to matching colour with existing colour complete all as specified and directed.
Supply and fixing LED street light fitting 15 watt complete with powder coated die cast aluminium compact, IP 65 protection complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size.
M&L for Fabrication, supply and fixing of GI pipe bracket up to 32 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm MS flat & fixed with anchor bolt suitable for upto 15 W LED security light fitting.
Supply and fixing of distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.
Supply and fixing of MCB, single pole and neutral, 240 Volts, 40-63 Amps, 10 KA breaking capacity complete all as specified and as directed.
Supply and fixing of MCB, single pole, 240 Volts, 6-32 Amps, 10 KA breaking capacity complete all as specified and as directed.
Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including rigid PVC casing caping including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of cables and one run of continuous earting cable drawn in casing caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.
M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.
Excavation in trenches for laying of cables, poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out.
M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.
M&L for Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
M&L for Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Supply, laying or fixing or passing through pipe commissioning and testing of XLPE insulated, armoured heavy duty, electric power cable with aluminium conductor, 1100 volts grade of cross sectional area 25 sqmm 4 core including suitable size lugs complete all as specified and directed Note:- Excavation & earth work, HDPE pipe where required shall be measured & paid separately under relevant items.
M&L for drilling (Horizontally) without cutting/ damaging existing road (Maximum 10 mtr wide) suitable for passing HDPE pipe of dia 50mm suitable for 0.4mpa working pressure complete all as specified and directed.
Supply and fixing of GI water tubing 32mm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc jointed and laid in trenches complete all as specified and as directed by Engineer in Charge.
Abhiraj Enterprises
M/S MK Nair
sunway associates
Bidder Name
M/S MK Nair
sunway associates
SHILPVED
Abhiraj Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .