SPECIAL REPAIRS TO BLDG NO. EET-31 AT 536 ASC BN AT SAUGOR UNDER GE SAUGOR

Amount

Dismantling of AC corrugated, semi corrugated sheet including ridges etc. in roof covering, complete all as specified.

Dismantling structural steel work including doors, gates, purlin, rafters but excluding framed truss etc. Note: Weight shall be verified by the GE.

Demolition of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified.

Taking down cement plaster from brick walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets

Demolition of cement concrete un reinforced in ground floors and paving n exc 15cm thickness below or above GL

Taking down chowkhats or frames exc 1.5 sqm but not exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed and removing from site.

Taking down chowkhats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed and removing from site.

Taking down steel tubing 15mm bore and connection, incl cleaning for refixing or removal to store.

Taking down steel tubing 20mm bore and connection, incl cleaning for refixing or removal to store.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Dismantling of trellis work (Jafri) including taking as under of battens in trellis"

S&F Pre-painted profile galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick trapozodial profile with gaurd film of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof ridge covering , fixed with self tapping screws as specified

Material and Labour for steel screw bolts, machine made, dia of neck 11 to 15mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 5 cm and not exceeding 10cm long, complete all as specified and directed.

S&F Mild Steel hollow sections of square, rectangular pipe etc as in purlin , rafter etc including distance pieces, cleats etc.

M&L for complete removal of existing treatment from old steel surfaces and prepering old painted steel suraces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

Material and Labour for two coats of synthetic enamel paint on new steel surfaces over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified.

M&L for brickwork with old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed .

M&L for rendering 15mm thick in two layer first layer 10mm in CM (1:6) and second layer 5mm in CM (1:4) on fair faces of brick masonry wall with WPC @ 2% by weight of cement and rendering is to be finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured & paid Seperately.

Supply only Integral waterproofing compound

M&L 15mm thick cement plaster in CM (1:6) on other than fair faces of brick walls finished even and smooth with out using extra cement.

M&L for two coat of synthetic distemper on walls over 2mm thick of cement putty over internal primer (for levelling the surface) including preparation of newly plastered surface etc all as specified.

M&L for complete removal of existing treatment mechanically and applying birla/J.K wall care white putty 2mm thick for levelling the surface and two coats exterior weather coat ( Apex paint or equivalent) over one coat of exterior primer,including properly making of v shape crakes and filling of all crakes with crakes seal incl. preparation of surfaces of old decorated walls etc complete all as specified and directed. Make: Asian Apex or equivalent as approved by the GE.

M&L for applying birla/J.K wall care white putty 2mm thick for levelling the surface and two coats exterior weather coat over one coat of exterior primer over newly plastered surfaces of walls ,chajjas, complete all as specified and directed . Make: Asian Apex or equivalent as approved by the GE.

S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F white Non Asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (Using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete.

M&L for non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement screed bed or bedding in CM (1:6).

M&L for colour glazed ceramic tiles on vertical surface 450x300x7-8 mm thick such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick backing layer of CM (1:4).

M&L for mirror polished kota stone slab flooring 18-20 mm thick of min size not less than 550 X 550 mm over and including 20mm screed bed CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete .

M&L for mirror polished kota stone slab 12 to 15 mm thick in riser of steps, skirting,dado and pillar,in single piece,with round nosing with three numbers of serration as in treads of steps for staircase laid over and including 10mm CM (1:4) rendering complete as specified.

S&F 600 x 600x 8-10 mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles over 15 mm thick screed bed in CM (1:6) all as specified and directed.

Ditto all as per item no. 32 above but in dado / skirting over 15 mm thick rendering in CM (1:4).

M&L for pressed steel frames for doors 105mmx60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate complete and back side of pressed steel frames filled with PCC 1:3:6 type C0 (Using 12.5mm graded crushed stone aggregate) all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 200 mm size aluminium anodised, barrell tower bolts of extruded section and fixed.

S&F 150 mm aluminium anodised cast type handles and fixed.

S&F 300 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified.

M&L for two coat of synthetic enamel painting to wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer cpmplete all as specified and directed.

S&F MS framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors etc conforming to Fe 410-O or Fe 310-O. Note: weight shall be verified by the GE.

S&F 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms,corners in toilet and like in cement mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of the slabs etcall as specified and directed .

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps, cooking plateform and other similar situations etc all as specified.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation etc or for shafts, man holes etc not exceeding 10 sqm on plan and getting out in soft/loose disintegrated rock complete all as specified and as directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.

M&L for moorum/red bajri filling in floors or pavings, laid in layer nexe 1.5cm thick, spred, leveled and rammed including watering.

M&L for broken stone or boulders hard core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface

Material and labour for 75mm thick, PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection , finished the surface even and fair without using extra cement, laid in alternate bays with filling of joints with bituminious sealing compound, complete all as specified.

M&L for reinforcement cement concrete (1:1.5:3) type A1 Nominal mix as in beams, cantilevers, bressumers lintels over 1.5m span.

Material and labour mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, as in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality.

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Fair finished surfaces of concrete flat.

S&F Factory made Solid PVC prelam Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory Made Solid prelam wood grain PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 4 mm thick Moulded Prelam PVC Sheet on the front face & 4 mm prelam PVC Sheet on back face with centre core PVC battens and frame consisting with MS tube supplying & fixing in frame at site as per specification & drawing .

S&F 100 mm stainless steel butt hinges medium weight, complete all as specified and directed.

S&F in repair vitreous chinaware EWC pedestal type closet with white seat & cover with flat bottom with hinging device all as specified and directed.

S&F in repair half stall vitreous china urinal bowl, with grating and union for discharge pipe, waste pipe (excluding flushing cistern,flush pipe) complete all as specified and directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend etc. complete all as specified and directed.

S&F 500 ltr capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed type) hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified & as directed incl. Dismantling water tanks complete all as specified and directed.

S&F in repair vitreous china WHB white flat back size 550x400mm with suitable full size pedestal including S&F angle iron brackets, CP pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F 15mm dia tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete incl the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/ concrete. After fixing holes shall be made good with CM (1:3) properly

Cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting n exc 10cm girth. pinning in, making good to facings where required and pointing in CM 1:3 on stone walls.

S&F 20mm dia tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete incl the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM (1:3) properly.

S&F PVC connection on pipe 450mm long with brass nut bolt

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair 15mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule.

S&F PVC (SWR) Pipe single socketed in any length with adhesive joints laid in trenches or in floor for 110mm dia

S&F in repair PVC (SWR) Pipe single socketed in any length with adhesive joints laid in trenches or in floor for 75mm dia

S&F in repair PVC (SWR) Pipe single socketed in any length with rubbering joints 110mm dia fixed to walls with clamp

S&F in repair PVC 110mm dia PVC Bends.

S&F in repair PVC 75 mm dia PVC Bends.

S&F in repair PVC vent cowl 110mm dia

S&F in repair for 75 mm dia PVC (SWR) floor traps, with C P grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S&F in repair 15mm bore stop cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions. Note: Weight shall not be less than 400gms.

S&F in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed. Note: Weight shall not be less than 400gms.

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,side and top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 6 mm thick tinted glass with rubber gasket,brush and aluminium beading,aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge Note: Al. section thickness shall not be less than1.50 mm.

S&F fixed type aluminium ventilators powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge. Note: Al. section thickness shall not be less than1.50 mm.

S&F partly glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83 x 44.45x 1.87 mm , & lock rail size is 100 x 44.45x 2mm mm & style of door shutter is 85mmx 44.45 x 2mm mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor door stopper incl. necessary joining cleats , glazing clips and floor springs etc complete. Note: Al. section thickness shall not be less than1.50 mm.

S&F in repair fully glazed Fixed Window 6 mm thick tinted coloured glass with and including aluminum frame powder coated consists of frame size is 83 x 44 mm fixed with rubber gasket & aluminum beading any No of panels with incl. necessary joining cleats , glazing clips etc complete. Note: Al. section thickness shall not be less than1.50 mm.

M&L for reinforcement cement concrete (1:1.5:3) type A1 (Using 20mm graded crushed stone aggregate) Nominal mix as in slabs supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like.

M&L for reinforcement cement concrete (1:1.5:3) type A1 (Using 20mm graded crushed stone aggregate) Nominal mix as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete

M&L for reinforcement cement concrete (1:1.5:3) type A1 (Using 20mm graded crushed stone aggregate) Nominal mix as in columns, pillars, piers, posts and struts.

Form work to side of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffit (if any) of foundation and plinth beams, and similar work, vertical or to batter flat rough finish surface of concrete.

Form work to sides of square, rectangular or polygonal rough finished surface of concrete pillars, posts, struts, piers, columns and stanchions.

Demolition / Taking down existing roof treatment complete of any description and M&L for provn of polymeric water proofing treatment to non approachable RCC roof description as under and all as specified:-

Preparation of RCC roof surfaces and providing 10mm thick cement plaster in CM 1:4 mixed with water proofing compound as per manufactures instruction and applying one coat of bitumen primer @ 0.3Kg/Sqm.

Applying one coat hot air blown bitumen of 85/25 grade at the rate of 1.2 Kg per sqm.

M&L for laying of one layer of polymeric water proofing membrane weighing 3 Kg/Sqm consisting of centre core of minimum 90 micron HM HDPE processes on both sides with a high quality polymeric asphaltic mix with further protected with thermo fusible HM HDPE film with a over lap of 100mm on both sides and ends all as specified.

Applying one coat of hot bitumen 85/25 grade @ 1.2 kg/sqm over polymeric membrane.

Applying aluminum paint in two coat @ 100gms/ Sqm in each coat over finished membrane surface complete all as specified and directed.

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc.

Taking down main switch, DB/change over/ MCCB, AC box of any capacity.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Make for cable– Havells/Finolex/Polycab

For one light/fan point controlled by one switch

For one 3 pin, 5 Amp independent socket point controlled by one switch

For one 3 pin, 5 Amp socket point with other switch on the same board

Ditto all as per item No 89.00 here in before but for power point wiring using with 2.5 sqmm PVC-FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

Ditto all as per item No 89.00 here in before but for power point wiring using with 4 sqmm PVC-FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 4 sqmm PVC insulated , unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green. (Makefor cable- Havells/finolex/Polycab

S&F Modular switch, one way, 6 Amp 230 Volt, 1 module. Make- Havells Athenea / L&T/ plaza

S&F modular socket 6 Amp-2/3 pin combined 2 module Make- Havells Athenea / L&T/ plaza

S&F Modular switch, single pole, one way,16 Amp 230 Volt Make- Havells Athenea / L&T/ plaza

S&F modular socket 6A/16A - 2/3 pin combined 2 module. Make- Havells Athenea / L&T/ plaza

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal. Make- Havells Athenea / L&T/plaza

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting with 9 watt LED bulb. Make- Havells Athenea / L&T/ plaza

S&F modular fan regulator electronic double space rotary step type 5 speed 120W, 2 module. Make- Havells Athenea / L&T/ plaza

M&L for LED TL fitting 20 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness. Make: Havells Cat Part N0 LUMILINEBS20WLED830SPCWH, 4 feet or eqvt in Phillips/CG.

S&F testing and commissioning of MCB SP 6-40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. Make- Legrand/ L&T/Havells

Ditto all as per item no 100.00 herein before but SPN 32- 63 Amps, 240 V. Make- Legrand/ L&T/Havells

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size. Make- Legrand/ L&T/Havells

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar incl TW board of suitable size. Make- Legrand/ L&T/Havells

S&F double door metallic sheet metal enclosure for DB double door(DPX-125 ) VTPN 8 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 09. Make- Legrand/ L&T/ Indoasian

S&F metal clad box enclosure with socket plug top and MCB SPN 20 Amps flush mounting enclosure with 2 pin and earth plug socket complete all as directed by Engineer-in-Charge Make- Legrand/ L&T/Havells

S&F MCCB 63 Amps 4 pole, 415 V 16 KA. Make- Legrand/Indoasian/L&T

S&F MCCB 100 Amps 4 pole, 415 V 16 KA. Make- Legrand/Indoasian/L&T

M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification.

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 10 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 10 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green. Make for cable– HAVELLS/FINOLEX/Polycab

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green. Make for cable– Havells/Finolex/Polycab

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green. Make for cable – Havells/Finolex/Polycab

S&F box type LED mirror optic fitting 1x9 Watt 2 feet box type complete all as specified and directed by Engr -in -Charge. Make: Havellls/ Wipro/ CG

S&F PLANO 2 X 2 ultra modern recess mounted luminaire with high performance LEDs 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/ grid ceiling Make- Havells cat part no PLANO2X2PLR36WLED857S or eqvt make of CG/ Wipro

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

PARAS BROTHERS

Tiwarinassociates

M/S vikas jain