REPAIRS SUNKEN FLOOR GUNITING ROOF TREATMENT TOILET ETC TO MISC BUILDINGS IN AOR OF AGE BR II AND REPAIR TO CEILING TOILETS STORAGE ACCN AND MT AREA AT HIRANKUDNA UNDER AGE BR II OF GE NORTH DELHI

Amount

M&L for preparation of old surfaces of wall with the help of mechaniser sander of Make Berger Paints express painting sanding machine or equivalent make as approved by GE (having mechanical vaccum machine with bag for dust collection) to make surface smoth and even complete all as specified and directed.

M&L for providing and applying waterproof cement based putty @ 1kg (undiluted) per sqm of average thickness 1mm, of Asian paints or its equivalent as approved by GE over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all as specified and directed. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2 : Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230DI) or equivalent having a DC electric motor of 3.3kW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041". Step 3 : Allow 6-8 hrs time to dry the putty surface. Step 4 : Sanding of the putty surface with Asian TruCare Wall Sander: L-01/H-01(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour complete all as specified and as directed

M&L providing and applying two coats of smooth acrylic emulsion on old surface with rich matt finish having voc less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Garco or equivalent having an electric motor of minimum 1HP with a flow speed of minimum 1ltr per minute having a pressure of 3300psi. Allow 6-8hrs to dry the surface for painting of subsequent coat.

M&L for applying two coats of oil bound distemper on old surface using Airless spray technology with max working pressure of 3300PPSI and capable of operating single spray gun with a max material hose length of 30mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coat of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, filling gaps wth wall care putty, complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying one coat of cement base paint on external wall surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying two coats of cement base paint on external wall surface complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or grith complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise described over 10cm width or grith complete all as specified and directed.

Taking down cement plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water all as specified and directed

M&L for rendering 15mm thick Ready Mix Plaster on internal surface mixed with PD proof 101 LW(+) of Dr fixit or equivalent integral WP admixture @ 200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equivalent as approved by GE in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. Note:- PD proof 101 LW(+) and super latex 302 or equivalent make of WP admixture shall be measured and paid seperately

M&L for rendering 15mm thick Ready Mix Plaster on external surface mixed with PD proof 101 LW(+) of Dr fixit or equivalent integral WP admixture @ 200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equivalent as approved by GE in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. Note:- PD proof 101 LW(+) and super latex 302 or equivalent make of WP admixture shall be measured and paid seperately

M&L for rendering 5mm thick Polymer Modified mortar Plaster on ceiling concrete surface in cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and directed.

Supply only PD proof 101 LW (+) of Dr Fixit or equivalent make as approved by GE.

Supply only super latex 302 of Dr fixit or equivalent make as approved by GE.

M&L preparation of newly plastered surface on walls and applying two coats of Oil Bound Distemper over a coat of primer and Putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured digital light coloured vitrified tiles 10mm thick in floor not exc 0.36sqm each tile area set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including screed bedding 15mm in CM 1:6 complete all as specified and directed.

All as per the description of srl No 22 above but on vertical surface as in dados/skirting over 10mm thick plaster as backing coat in CM 1:4 all as specified

M&L non skid ceramic tiles coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 complete all as specified and directed.

M&L glazed ceramic coloured tiles size 450mm x 300mm x 7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adehessive on complete exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2mm dia of wire and total aperture 75mm, thickness of gunite n.exc 25mm thick (average thickness) using cement mortar 1 :3 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by weight of cement or as per manufacturer's instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper Geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding, shuttering necessary chased to brick work or RCC members at any height upto four storey buildings including removing of small trees shrubs etc complete all as specified and directed. Note: Steel welded mesh to be welded with the existing reinforcement. The cost of welded meshis to be welded with the existing re-inforcement is deemed to be included in the quoted rate.

Taking up or down steel tubing and connection, 15mm borecleanning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing and connection, 20mm bore cleanning for refixing or removal to store, complete all as specified and directed.

Supply and Laying of CPVC pipes 20mm outer diameter SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply and Laying of CPVC pipes 25mm outer diameter SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F of 15mm bore tubes medium grade galvanised with and including all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

S&F of 20mm bore tubes medium grade galvanised with and including all GI fittings (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed.

M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F in repairs curtain rods stainless steel powder coated polished 20mm dia including brackets, side stop complete all as specified and directed.

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) complete all as specified and directed.

All as per the description of srl item No 35 above but exc 1.5 sqm but n.exc 4sqm each

Taking down shutters of any description exc 1sqm but not exc 2 sqm each complete all as specified and directed.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each easing, and adjusting as required and re-fixing in same opening including renewal of screws complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc, all as specified and directed.

S&F 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as directed and specified.

S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S&F solid door frame 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete.all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash xtruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F aluminium powder coated three track window as per Make: Jindal Series "C" of thickness 1.5mm ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified. Note:- Make Jindal or equivalent from other makes mentioned in Appx C.

S&F for aluminium anodised powder coated Deco grill (DG-104), 10mm wide with U shape snap beading complete all as specified and directed.

S&F aluminium powder coated (50 micron thick) door shutter area n.exc 1.50sqm each fixed to wall with min four number steel fastners, partly glazed with 5mm thick tinted glass and partly panelled with 8mm thick colouered aluminium composit panels incl rubber beading, joining cleat for fixing in position, with aluminium fixtures; 2 numbers door handle 250mm long, 1 number barrel tower bolt 200mm long ,1 number floor door spring & one No 4 liver mortice lock of Godrej of size 100mm in each shutter all as specified and directed as per following specifications -- (a) Style Section shall be of size 85.00 x 44.45 x 1.50mm (Section No 19560) (b) Top rail Section shall be of size 85.00 x 44.45 x 1.50mm (Section No 19581) (c) Lock rail Section shall be of size 150.00 x 44.45 x 1.50mm (Section No 19596) (d) Bottom rail Section shall be of size 150.00 x 44.45 x 1.50mm (Section No 19584) (e) Glazing clip 0.80 mm thick (Section No 19370). (f) Top, Bottom and verticle member of shutters will be tightened with hexagonal nut and purpusly made bolt of 10mm dia MS round bar threaded on both the end . Note:- Section make Jindal or equivalent from other makes mentioned in Appx C.

S&F 100mm medium weight stainless steel butt hinges complete all as specified

S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified.

S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete.

S&F aluminium handles cast type, anodised, 125mm size and fixed as directed and specifed

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified.

Complete removal of old roof treatment incuding cement mortar (except mudfushka, brick tile) and removal of grass, small trees by picking sweeping, cleaning and washing down with water to remove dust etc incuding removing debries out side MOD land, complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water brushing neat cement slurry with 3.0 kg/sqm and M&L for 15mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately.

M&L for Cleaning all the dust and loose material by brush/blower/Grinder including removing of vegetation/plantation from the surface. M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system.Make: STP/Sika/Asian paint or equivalent as approved by GE. Note:- Application of water proofing treatment will be done by Authorised Applicator only. (i) The water proofing treatment shall be carried out by the manufacturer or their authorized applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

Disconnecting existing overhead tanks, setting aside or lowered if required for repairing, cleaning etc and hoisting if required reconnecting and refixing in position of capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed.

Disconnecting existing overhead tanks, setting aside or lowered if required for repairing, cleaning etc and hoisting if required reconnecting and refixing in position of capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

M&L for PCC1:2:4 type B-0 (12.5mm graded crushed stone aggregate) cement concrete in roof padding, roof kerbs of mud stops, rounded or chamfered on edges complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheetinclusive of site on PVC frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed work complete all as specified and directed

M&L exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid 6mm thick complete all as specified and directed . Note : The frame work for ceiling shall be measured and paid separately

M&L anodised aluminum snap grid frame work of size 605mm x 605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long with complete hanging arrangement and making good at surface all as specified and directed

S&F GI powder coated frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I.(up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

M&L 12mm thick size glass fibre reinforced building board ceiling fixed or laid / inserted to timber/ GI / Aluminium frame work with screws complete all as per manufacturers instructions and as directed.

S&F in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs vitreous china urinal half stall with ceramic partition white including waste pipe & sprader complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in any position not otherwise specified for including removal of surplus soils/demolished materials not exc 50m and depositing all as specified and as directed.

M&L for rendering 10mm thick on brick and concrete surface as wall and floor in cement mortar 1:3 finished even and smooth without using extra cement,complete all as specified.

M&L for rendering 15mm thick on brick and concrete surface as wall and floor in cement mortar 1:3 finished even and smooth without using extra cement,complete all as specified.

Supply only liquid water proofing compound complete all as specified.

M&L bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg/sqm per coat on walls, beams & floors of sunken portion complete all as specified and directed.

M&L for 32mm dia GI Pipe medium grade as in spout of sunken floor 450mm long complete all as specified and directed.

M&L for Lime concrete cement ratio 1:2 (using 40mm graded curshed stone aggregate) as in sunken floor complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded curshed stone aggregate) as in flooring finished even and rough to receive tiles complete all as specified and directed.

Demolition and breaking up old broken, PVC (SWR), AC, SWG soil waste and vent pipe of 100mm bore including accessories set in cement mortar as directed complete all as specified and directed.

Demolition and breaking up old broken, Cast Iron, RCC Pipe pipe of 100mm bore including accessories set in cement mortar as directed complete all as specified and directed.

S&F 110mm bore PVC rain water pipe single socketed in any length with rubber ring fixed to wall with clamp complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring fixed to wall and floor complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece single with access door rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece single with access door rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap with gratings including jointing with solvent cement and as directed.

S&F 110mm dia PVC (SWR) P trap including jointing with solvent cement and as directed.

S&F of 75mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

M&L welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length all as specified and directed..

friends associeates

SARTHEE CONSTRUCTION CO.

M/S AADI ENTERPRISES

QUALITY CONSTRUCTIONS CO

VDM GROUPS

S D Constructions

MOHIT ENTERPRISES