ERODE DT - KODUMUDI TP - 15th FC - Tied grant - First Installment 2022-2023

Amount

Remeving cement plasters on the wall including all cost of materials and labour charges etc., complete complying with standard specification.

Chipping of concrete and roughening the surface including all cost of materials and labour charges etc., complete complying with standard specification.

Dismantling of Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs including all cost of materials and labour charges etc., complete complying with standard specification.

Special Ceiling Plastering with cement mortar 1:3 mix, to 10 mm thick in all floor including all cost of materials & labour charges etc., complete complying with standard specification.

Plastering with cement mortar 1:5 mix, to 12mm thick including all cost of materials and labour charges etc., complete complying with standard specification.

Plastering with cement mortar 1:5 mix, to 20 mm thick including all cost of materials and labour charges etc., complete complying with standard specification.

Paving the floor with Scratch proof ceramic tiles of any colour and size laid in CM 1:2 mix including all charges etc., complete complying with standard specification.

Painting with exterior emulsion paint two coats with best approved brand and colour. The brand and colour should be got approved from the Exe. Engineer before use on works.

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works includingcutting, threading and fixing charges etc.,

Supply and fixing of 7W /9W LED Fitting with LED BULBS ISI Make with Standard specification .(pg.no:13)

Supply and fixing of 18W 4 Feet LED Fitting with LED TUBE ISI Make with Standard specification .(ANNEXURE-VII Sl.No.15 a)

Supply and fixing of 25 w LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) 25W LED Street Light Fitting with LED etc., complete. ISI Make with Standard specification .(ANNEXURE-VII Sl.No.18 a)

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Supply and fixing in position 22" Indian type water closet with foot reset includes "P" (or) "S" trap including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws int

D . CHELLAMUTHU