Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹37.7 L+₹2.2 L (6.21%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹38.0 L+₹2.5 L (7.00%)Rejected-Finance HOUSE NO 87 SHAH FAISAL ABAD DHOBI MOHALLA BATAMALOO SRINAGAR 190009 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190009 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹40.0 L+₹4.5 L (12.7%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹47.4 L+₹11.9 L (33.6%)Rejected-Finance BANPURA BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 864 EWS
Garrison Engineer 864 Enggr Wks Sec, PIN-913864,C/o 56 APO
REPAIRS TO ROOF, CEILING, FLOORING OTHER CONNECTED B/R WORKS AND REPAIR TO PLUMBING / LAGGING, WATER TANK IN CERTAIN, BUNGLOWS, OFFICER INSTITUTES, OFFR ACCN, INCLUDING JCOS / ORS ACCN IN ZONE B AREA UNDER AOR OF AGE B/R II AT BB CANTT, SRINAGA
2023_MES_617891_1
864/WS-532/2023-24
Open Tender
Civil Works
Item Rate
180 days
B B Cantt.
As per tender
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹90,000
Yes
21 Nov 2023
8 Sept 2023
11 Oct 2023
8 Sept 2023
6 Oct 2023
22 Sept 2023
Amount
Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet (any pattern) 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L type or J type or cranked hook bolt, in roof, wall etc with grade of zinc coating 275 complete all as specified and as directed.
S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; false ceiling frame, framework of water tanks staging and similar work conforming to Fe. 290. Gde-E-165 complete all as specified and as directed.
M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe. 290. Gde-E-165 complete all as specified and as directed.
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section, in any position unframed work complete all as specified and as directed.
M&L for clean sawn second class hard-wood in scantlings framed work complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F Khatamband pattern false ceiling, design as approved by GE with ornamental wood work made out of 1st class soft wood (Deodar) including hangers/ fillets/ cornices fixed over and including 12mm thick BWR plywood and finally finished with french polish (two or more coats) complete all as specified and as directed.
S&F 15mm thick 1st class soft wood Australlian wooden panelling fixed with toughened and grouted as wall panelling including fillets/ cornices fixed over and including 9mm thick plywood BWR fixing on walls and two coat of varnishing, polishing and preparation with sneezing complete all as specified and as directed.
S&F Fibre glass reinforced translucent 2mm thick corrugated or plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.
M&L for 4mm thick size 600x600mm HPSC (High pressure steam cured) Pre-laminated self embossed texture designer board E-Board classic to be fixed and including GI Based powder coated snap grid/ section (Make-Armsstrong) size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 4mm dia GI wire hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisons for light fixtures of any size and finally applying two coats of oil bound distemper with preparation of surfaces etc complete all as specified and as directed.
M&L for 9mm thick plywood grade BWR type BB fixed with screws/ nails to timber frame work for wall panelling /flooring/ ceiling complete all as specified and as directed.
M&L for 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed.
S&F 1.5mm thick Decorative laminate type 1 of surface finish, colour and pattern including necessary fillets/ cornices as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.
M&L for 2mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and sealed down with an approved adhesive complete all as specified and as directed.
S&F in repair 2nd class hard wood Plain fillets. square, rectangular or triangular in section, exc 6 & n exc 13 Sqcm, clean sawn, secured with nails complete all as specified and as directed.
S&F in repairs for wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/ cornices, laid over 12mm thick BWR plywood complete all as per manufracturer's instruction and all as specified and as directed.
Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.
M&L for brickwork with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM (1:6) etc complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:4) on brick work or concrete surfaces rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded in any mortar complete all as specified and as directed.
M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and as directed.
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) dark shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed in CM (1:6) complete all specified and as directed.
M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed.
M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and as directed.
Description all as per serial item No 34.00 described here-in-before but 20 mm bore pipe.
S&F Steel water tubing medium grade galvanised with all fitting complete to wall and ceiling or laid in floors of 15mm bore complete all as specified and as directed.
Description all as per serial item No 36.00 described here-in-before but 20 mm bore pipe.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
Description all as per serial item No 39.00 described here-in-before but 75mm bore pipe.
Dismantling water tanks of capacity exc 250 ltrs and not exc 500 ltrs etc complete all as specified and as directed.
Description all as per serial item No 41.00 described here-in-before but capacity exc 500 ltrs and not exc 1000 ltrs.
S&F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position including brass float valve all as specified in SSR Part I complete all as specified and as directed.
Description all as per serial item No 43.00 described here-in-before but capacity 1000 ltrs.
S&F in repair PVC (SWR) floor/ nahani trap plain with CP grating including jointing with solvent cement of 75 mm dia etc complete all as specified and as directed.
S&F in repairs 15mm bore Brass CP mixer fancy type for WHB/ Sink/ Wall and for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor & pavings not exceeding 15 cm thick below or above ground level complete all as specified and as directed.
M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/ levelling course complete all as specified and as directed.
M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed.
M&L for rubber moulded chequered cement concrete tiles with grey cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.
M&L for rubber moulded Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over 30mm thick sand layer complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20 - 25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all specified and as directed.
M&L for preparation of newly plastered or unplastered wall surfaces and applying two costs of cement base paint complete all as specified and as directed.
M&L for preparation of old plastered wall surfaces and appliy one coat of cement base paint complete all as specified and as directed.
M&L for preparation of old plastered wall surfaces and appliy two coats of oil bound distemper complete all as specified and as directed.
M&L for preparation of new wooden surfaces and applying two coat of synthetic enamel paint over one coat of pink primer surface of any description not other wise described over 10 cm width or girth complete all as specified and as directed.
M&L for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F in repairs Harrison rails (curtain rails), mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F in repairs kitchen plate rack, made out of 1mm thick stainless steel of size 600mm x 750mm / 750mm x 900mm and fixed with brass screws and washers complete all as specified and as directed.
M&L for french polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new/old works with two or more coats complete all as specified and as directed.
M&L for special treatment to sunken portions of toilet by demolition of existing treatment of any description and thickness, removal rubbish outside MD land, providing 10mm thick plaster in cement mortar (1:4) with water proofing liquid conplast 421 of make Fosroc or equivalent as specified and applying one coat of each Nittoproof 100 and Nittoproof 120 of M/S Fosroc or equivalent as specified on plastered surface and rendering again 10mm plaster in cement moratr (1:4) mixed with conplast 421 of M/S Fosroc or equivalent as specified in Sunken portion and CI pipe joints shall be filled/ jointed with mixture of cement, fine, sand and Nittoproof 130 of M/S Fosroc or equivalent as specified and provide hole in the wall and fix 600mm long and 40mm dia GI spouts light grade and PCC (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) filling in sunken portions, floor area of WC & Bath upto 1.50 Sqm (floor) complete all as specified and as directed.
Disconnecting existing tanks of capacity exc 250 ltrs & n.exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Cleaning repairing, etc. measured separately) complete all as specified and as directed.
Description all as per serial item No 65.00 described here-in-before but capacity exceeding 500 ltrs & not exceeding 1000 ltrs.
M&L for cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. of capacity exc 250 ltrs & n.exc 500 ltrs including writing of cleaning date and next date of cleaning on tank surface by synthetic enamel paint complete all as specified and as dirceted.
Description all as per serial item No 67.00 described here-in-before but capacity exceeding 500 ltrs & not exceeding 1000 ltrs.
Removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m from the bldgs complete all as specified and as directed.
M&L for lagging to pipes of internal dia 15 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 Kg/cum conforming to IS-9842, reinforced with chicken mesh wire netting 25 gauge, 20 mm mesh and with POP complete all as specified and as directed.
Description all as per serial item No 70.00 described here-in-before but for 20mm internal dia of pipe.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connections to drain pipe and to flushing pipe, antisyphonage pipe, seat cover etc complete all as specified and as directed.
S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including MS brackets, cutting for and pinning in ends of brackets or erecting stand, 32mm dia CP waste coupling in full thread (minimum weight 45gms), waste pipe, waste fittings etc. complete all as specified and as directed.
S&F in repair chromium plated health faucet, telephonic type with CP flexible arms 1.0 mtr long, suitable for fixed to 15mm bore CP angle valves complete all as specified and as directed.
S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and as directed.
S&F in repair 15mm bore centre hole mixer for mixing hot & cold water, suitable for wash Hand Basin, cast copper alloy with dual capastan head chromium plated, fancy type, screwed down, high pressure with lettered Hot & cold with long shanks and fly nuts, complete all as specified and as directed.
S&F in repair Hand Shower (Telephonic type), chromium plated with 900mm long 15mm bore chrome finish flexible pipe, complete all as specified and as directed. (Make : Jaquar Cat Part No ALD-CHR-583, SHA-571 or telephonically equilvalent make in CERA/ HINDWARE)
S&F in repair corner glass shelf 300mm x 300 mm (with brackets), complete all as specified and as directed.
S&F in repair chromium plated glass shelf consisting of 5.5mm thick sheet glass, 600mm long and 120mm wide with CP brackets, guard bar and railing complete all as specified and as directed.
S&F in repair Angle valve 15mm dia (internal) cast copper alloy chromium plated screwed down, high pressure, srewed both ends for iron pipe or for union, complete all as specified and as directed.
S&F in repair PVC connection of PTMT nuts 15x450mm long complete all as specified and as directed.
S&F in repair PVC connection of PTMT nuts 15x600mm long complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar (1:4) as in manhole, wall, Drain etc complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM (1:4), rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for 15 mm thick rendering in CM (1:6) on brick work or concrete surfaces, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.
Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition, wooden flooring etc complete all as specified and as directed.
S&F second class hard wood 20mm thick boarding, with nails in any situation (except flooring and skirting) planed one side with bult joints fixed in shelves, partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and as directed.
S&F in repair 20 mm bore Gun-metal, globe or gate valves, iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
Description all as per serial item No 88.00 described here-in-before but 15 mm bore.
M/S Tajamul Ah Buchh
M/s Lal Enterprises
Concept Engineering & Constructions
M/S SUHEEL CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .