Repair/Renovation and upgradation of Nigeen Club (Balance Work).

KOTA STONE FLOORING Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

40mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 28mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 7 mm to 10mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix :3 marble chips) by volume including cement slurry and curing complete White cement without any pigment.

62mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 liter per 50kg of cement or as per manufacturer’s specifications, including cost of cement slurry and curing complete,

Painting on tile work with terra kota paint two or more coats incl. one coats of primer mixed wityh adhesive material

Refixing of Existing Devri Kerb Stone in 1:3 cement mortar incl. pointing in 1:2 of size 225 x 170mm

Providing and fixing 15cm wide 45 cm overall semi circular plain G.S.sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc.including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level a of 50 m outside the periphery of the area cleared

Supplying and stacking incl spreading and ramming of good earth with all carriages

Repairing of existing man holes of size 24" 24" by way of plastering and man hole cover

P/F of 304 grade stainless steel for main gate as per design incl cost of hinges and locking arrangements

Gazebos

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying of stone soling/boulders (Hand Packed) including ramming, dressing and watering all complete

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level. 1.2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

P/F of 16mm dis MS bolts 18" long with bottom tee of structural steel flat iron 50x5mm 12" long both sides to be embeddsed in C C incl. cost of washiers and bolts

Structural steel work in single section, fixed with or without connecting late, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10mm thick plate

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes 150x150x5mm hollow square tubes

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood

S/F of 12mm thick water proof ply wood

S/F of panch Mraba Khatumbandi ceiling

Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size )

French spirit polishing, Two or more coats on new works including a coat of wood filler

S/F of 40x40mm wooden cornice in budloo wood

Applying primer coat red oxide on steel work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats

S/F of stone coated metal roofing tiles

SITC of Cast iron benches with MS hollow strips duly painted 80 kg by weight

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Carraige aggregate 15k Lead

ELECTRICAL PART

Wiring for light point/heating point/ power plug with 2x4 sq.mm 1x4 sq.mm earth wire FRLS PVC Insulated copper conductor ( Havell/Polycab/Anchor/ equivalent as directed by engineer Incharge) single core cable in surface recessed medium class PVC conduit. (code no.69)

S/F testing and comm .of MCBs 10x of the capacities in sub mains controls Legard C curve/ Schinder make as directed by engineer incharge ( code no 9.1)

Supplying and fixing suitable size Gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 no.s 3 pin 5/6 A modular socket and 2 no.s 5/6 A modular switch, connections etc. Modular Switch & Socket ( Legrands Mylinc/ SSK NV/ ABB Tvisha make) ( code no. 69.1)