Providing Basic Facilities and Thirupani works at Arulmigu Karapatra Sivapragasa Swamigal Madalayam

Amount

Dismantling of plain cement concrete. Complete and complying with standard specification and as directed by the departmental officers.

Dismantling of RCC using deploying machineries and clearing away and carefully stacking materials useful for re-use get Executive Engineer approval Before using for site filling or Dispatch to Dump Yard

Dismantling of Brick Masonry in cement mortar walls under 3m high and carefully stacking materials useful for re-use get Executive Engineer approval Before using for site filling or Dispatch to Dump Yard

Clean removal plaster from walls and Replastering with lime Mortar 1:1.5 , 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.complete complying with standard specification .complete complying with standard specification

Dismantling, clearing away and carefully stacking materials useful for re-use for any Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Cleaning cut stones using Mild hydrochloric acid and powder and water pressure etc., Complete

White washing in old wall surface through scrapping of old plastered surface. complete complying with standard specifications.

Dismantling, clearing away and carefully stacking materials useful for re-use Old Stone Removing granite, Flooring.

Dismantling of Pressed tile with Weathering coarse using deploying machineries and clearing away and carefully stacking materials useful for re-use Complete complying with standard specification.

Removing old paint from iron surface with sand paper complete complying with standard specifications.

Removal of Doors and Windows including removal of frames, hinges and fastenings By Manual and clearing away and carefully stacking materials useful for re-use Complete complying with standard specification .

Dismantling Ac sheet Roofing Including Tublaar Section clearing away and carefully stacking materials useful for re-use. complete complying with standard specification.

Removal of Pan Tiles or Manglore Tiles without roof timbers By Manual and clearing away and carefully stacking materials useful for re-use Complete complying with standard specification .

Clean Removal of Rubber moulded Paver block and stacking for re use and Clear the existing gravel bed complete complying with standard specification and as directed by the departmental officers.

Dismantling corrugated iron sheet roofing without roof timbers Including clearing away and carefully stacking materials useful for re-use. complete complying with standard specification.

Dismantling the Old Cuddappah stone clearing away and stacking for and Paving with New fine polished cuddapah stone slab of 20/30 mm thickness over Cement Mortar 1:3 (One Cement and Three crushed stone Sand) 20mm thick over the existing bed of Cement Concrete 1:5:10, (One Cement, Five crushed stone sandand Ten aggregate) and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing, etc., The cuddapah stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete complying with standard specification.

Installation of vertical Bored cast in situ piles of 500mm dia in all types of soils, using Ready Mix Concrete of M 30 grade, with sulphate resistant Cement, fine aggregate, 20mm and down graded HBGS jelly coarse aggregate. The rate excludes cost of reinforcing steel, binding wire, fabrication, welding charges, placing of reinforcement cage in bore hole in correct position and including cost of boring to the required depth with Bentonite solution with temerory casing of required length, conveyance of RMC to site and pouring concrete using Tremine pipes, conveyance of all materials to the site including all tools and plants, shifting the plants and equipments from one point to another, excavation of mud pits for circulation of Bentonite solution, closing the mud pits to original level and mud removal with initial lead and lift etc complete as directed by the departmental officers including socketing. The reinforcement cage should be welded properly for lifting. The concrete cubes to be tested as per IS 456-2000. Acceptance criteria by clause 16.1. Frequency of testing should be as per clause 15.2.2. The length of pile for payment shall be measured up to natural ground level. The work should be carried out as per IS 2911. Pile depth should be decided by the departmental office at site.

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Earth work excavation for desilting the existing rivers/ canals / channels/odai/ nullas / drains/flood bowls/tanks/ reservoirs etc., consisting of very loose soil, silt,oily silt, slushy, marshy, loany, organic soil, sea shelland flat mica particles with zero present air void inunhygienic & insanitary conditions in under water and not under water deploying earth moving machinery withsuitable floats buoys barge/ hydraulic excavator & othermechanical devices including the cost of hire chargesfor machinery, with cost of skilled operators with helper& cleaners for the entire operations to reach the banksin which the removed silt & sludge has to be dumpedover either one of the rivers / canals / channels/odai/nullas / drains/floods bowls / tanks / reservoirs etc,bank whichever is convenient as per the prevailing siteconditions for easy conveyance and including jungle clearance etc..

Providing and laying Wet Mix Macadam of good grade of material for 150mm thickincluding cost and conveyance of materials, labour charges for spreading and consolided by power roller to the requirement of departmental officers. complete and complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Supplying and filling basement with conveyed earth from yard with initial 10 km lead . stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders . depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling of well gravel in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Providing and laying Granular Sub Base as per table Nos. 400-1/400-2 - for 300 cum to consolidated 1hide of 150mm designed to attain a CBR value of not less than 20 including cost and conveyance of crushed stone sandgravel from approved sources to work site and stacking them to the departmental gauge for premeasurement including labour charges labour charges for power roller watering and all other tools and plants employed including all other incidental charges etc., complete

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and Basement

Ground Floor

First Floor

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and Basement

Supplying and erecting steel shuttering including necessary supports for plain surfaces for reinforced cement concrete works such as grade beams, column footing, plinth beam, staircase steps, pedestals bed blocks cover slab etc., using mild steel B.G 10 sheets of size 90cm X 60cm Stiffened with mild steel angles of size 32mm X 32mm X 3mm for boarding laid over silver oak ( Country wood) joists of size 10cm X 6.5cm spaced at about 90cm centre to centre, supported by casurina props 10cm to 13cm diameter spaced at 75cm centre to centre etc., complete complying with standard specification.

Providing form work for foundation etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

For plane surfaces such as vertical slab, side slab of boxing, vertical drops, facia, vertical wall, etc.

Centering for curved surfaces of all RCC items of work

Providing form work IN COLUMN QUANTITY etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

For Column 0.00 - 3.30m

For Column 3.30 - 4.30m

For Column 4.30 - 5.00m

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.

Brick work using ground moulded Bricks of size 9" x4 1/2"x 3"in Cement Mortar 1:5 in basement (One cement and Five sand) including curing neat finishing, etc., complete complying with standard specifiction.

Foundation and Basement

R.R Masonary in cement mortar 1:5 (one cement,and five crushed stone sand) for foundation and basement including simultaneously pointing above ground level with the same mortar etc.,complete complete complying with standard specification and as directed by the departmental officers

Supply of cut stone blocks of length upto 5 feet for Temple pattern Stone work

Supply of cut stone blocks of length above 5 feet and upto 10 feet (1^1/2’x 1^1/2’x10’) for Temple pattern Stone work

Brick work using best quality II Class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3" in cement mortar 1:6 (One cement and Six sand) for including curing neat finishing, etc., complete complying with standard specifiction.

Ground Floor

First Floor

Brick partition walls of 11.50cm thickness using best quality Ground moulded chamber bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Ground Floor

Ornamental Brick work in Cement MORTAR 1:4 mix using II Class Ground Moulded Chamber Burnt Bricks of size 9" x 43/8" x 23/4" all vari vargams, moulds, sthambas, mukapatram, koodu, nasi, and all ornamental brick work complete panchavarnam agaraies, karnakoodus etc forming core walls rajagopuram/vimanams complete in cluding cement al labour chages

Upto 15' Feet

Upto 25' Feet

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.., complete complying with standard specification.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

Clean removal of cement plaster from walls and racking out joints 20mm deep and Re Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting the new walls two coats with best approved quality weather shield exterior emulsion paint over one coat of primer including cost of brushes, emulsion paints scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. (The quality and shade of paint should be got approved by the Executive Engineer before use).

Providing vargapoochu over the corewalls of Vimanams/Gopurams, with Cement martor.1:4 complete including shaping the mukhapathram, mahannasi,koodu all arnamental works to proper shape, by embedding broken bricks or shaped/chiselled bricks, rough - plastering with Cement mortar.1:4 and finishing with final ornamental plastering and nayam theervai including cost and conveyance of all materials labour therefore, lifting of materials, all woeking in heights curing with water etc, complete - including all extra for folding and including clearing the debris from the vimanams/ Gopurams - Upto 15'0" height Excluding Kalkaram

Upto 15'0" height Excluding Kalkaram

Upto 25'0" height Excluding Kalkaram

Providing new sudhai vigrahams in the vimanams and Rajagopurams with galvanised iron rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in Combination martor.1:1:4 finishing the same with Combination martor.1:1:4, bringing go the correct shape (Lakshana in conformity with silpa sastra inclusive of special ornaments, weapons, peedam etc., Complete and providing Combination martor.1:1:4 Nayam theervai wherever necessary, inclusive of cost and conveyance of all materials, such as cement broken bricks, sand G.I rods,binding wire, all labour for working in height, curing lifting of materials etc., complete, including cement painting 2 coats iver a primary coat (one vigraham is accountable with one head, 4 hands with weapons , ornamental costumes etc, as per prathima Lakshana, vigraham height is measurable from the crown top to the bottom of foot only. If peetam is provided the rate with peetam may be adopted as detailed thereunder) 2'6" to 3'6" Height

Painting the walls with two coats of water based plastic emulsion paint over one coat of primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Painting water based with multicolour (Panchavarnam ) good Emultion paint complete for the Vimanams/Gopurams, including cost and conveyance of all materials, labour charges includingArtist painter, working in heights , lifting of materials, cost of brushes etc., complete - which include all extra for foldings - Upto 25'0" height complete complying with standard specification.

Upto 15' Height

Upto 25' Height

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting Old wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Removing old paint from iron surface with sand paper and RePainting works such as steel doors, windows, ventilators, window bars, balustrades Columns etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Paving the floor with best quality Double charge Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with cut stone 600 x 600 mm not less than 100 mm thick with machine cutting edge and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and labour charges for paving and pointing with lime mortor 1:1.5 etc

Single Line Dressing

Three Line Dressing

Paving the floor with best approved quality fine polished Rajastan Kota stone slabs of size 600 x 600 of 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Supplying and laying of Interlocking Paver Block Stone 83 mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,

Paving and Flooring Brick Jelly Lime Concrete 1:2:5 using 20mm brick jelly in Lime Mortar 1:2 - 10 cu.mincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification .complete complying with standard specification .

Flooring with following joint free rectified glazed ceramic tiles of size 305 x 305 x 6 mm laid over 25 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of size 450 x 300 x 8mm set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Weathering course in brick jelly lime concrete using broken brick jelly of size 25mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing of Best tile Roofing with Manglore tile Class A Following size 230 mm x 230 mm x 20 mm including all necessary accessories complete complying with standard specification and as directed by the departmental officer

Supplying and fixing 40mm dia GI pipe for staircase hand rail including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers

Supplying and fixing GI pipe handrails for handicapped persons using 50mm dia GI pipe double handrail at a height of 800mm and 900mm from floor level with 25mm thick MS square rods as balusters embedded in the concrete and welded with pipe at 60cm centre to centre as shown in CA Job No. 9123 / 1 including cutting, welding, bending and fixing charges and applying one coat of red oxide primer for MS members as directed by the departmental officers

Supplying and fixing mild steel grills for Grill Gate ,windows, ventilators etc., including priming coat complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete complying with relevant standard specification and as directed by the departmental officers.

Supplying and fixing of Teak Wood ornamental temple type door shutter using Teak wood frame of size 150mm x 120mm of double leaf in position using 50mm thick planks shutters with necessary brass hinges 125x30mm - 10 nos ,brass aldrops 300x16mm - 2 nos,tower bolts 400mm long x 12mm dia - 4 nos ,brass handle 200mm long - 4 nos, aluminium door stopper - 2 nos including two coat of varnishing and inlcuding labour charges for fixing in position etc.,complete as directed by the departmental officers. ( Fittings provided shall bear ISI mark. The quality, design of panel door and brand of door shutter and furniture fittings should be got approved by the Executive engineer before use)

Size 1.35m x 2.10m

Size 1.05m x 1.90m

Supplying and fixing solid core flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround Teak ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Single Leaf Door

Double Leaf Door

Providing Cup-board Shutter with frame using termite /water proof plywood of 19mm thick over which laminatedsheet of 0.8mm thick fixed inside the shutter and 1mmthick fixed in the outside of the shutter using fevicol alongwith necessary furniture fittings, such as, hydralic hinges,tower bolt, handles, multi purpose locks etc., as directed bythe Departmental Officers. The design pattern, water proofplywood, laminate sheet and other materials should be gotapproved from the Executive Engineer befoe use on work.

Best Indian Teak Wood wrought and putup for frames of doors, windows, ventilators, cupboards and any other similar joinery works with necessary plugs, rebates for shutters, plaster grooves on all faces etc., including labour charges for fixing hold fast complying with revevent standard specification etc., in all respects.

Scantlings below 2.00 m Length

Scantlings Above 2.00 m Length

Supplying and fixing of Teak wood window Double panelled shutter with necessary T.W. internal lipping conforming to IS 2302 with both sides alround Teak ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as wire nails .75x10mm Brass tower bolt 2nos. 4 no Hinges 100 x 30 mm. 2 nos 150mm‘ Brass handle and window stay etc., including cost of Teak wood frame size 75 x 60mm for frame 7.5 x 3.5 for shutter complete as directed by the departmental officers.

Supplying and fixing wood polymer composite board solid door frame and 25mm thick shutter frame corners of extruded outer size 75mm X 50mm the inner core more rigid WPC composite with minimum shore hardness of 55 and bulk density 0.8 Grams per cubic centimeters. The frame shall be fixed to the wall using 10 X 100 mm long MS screw through the frame through the pvc fastener. Minimum three numbers of screw to be provided for each vertical member. The overall size of frame shall be with suitable rebate for housing shutter and shutter consist of 25mm polymer composite board single core exhaust with one side embo printing design. To avoid duplicate from the printing design shall have logo of the WPC board shall be bount aid proved by kept official. The shutter shall be provided with 3 Nos of 4” SS butt hinges, 2 Nos of 4” Stainless Steel handles, 3 Nos of 6” Stainless Steel tower bolts with required Stainless Steel screws including labour charges for fixing the shutter frame, shutter and furniture fittings in position and finished smooth with template etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officers

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 132GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The Ventilator should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. 75mm Thick

Providing and laying of hot applied Thermoplasticcompound 2.5 mm thick including reflectorisingglass beads @ 250 gms per sqm area, thickness of2.5 mm is exclusive of surface applied glass beads asper IRC:35. The finished surface to be level, uniformand free from streaks and holes etc., complete asper MoRT&H specification No.803

Providing and fixing reflective road studs of ‘categoryA’ Raised pavement markers made out of polycarbonate / methyl methercrylate/ABS mouldedbody confirming to ASTM D 788 and reflectivepanels with micro prismatic lens capable of providingtotal internal reflection of the light entering thelens face with retro reflectance and chromaticityvalues conforming to ASTM D4280. The reflectiveraised pavement markers shall also confirm to theMORTH circular No RW / NH. 33023/10/ 97-DO.III dt 11.06.97. The height, width and length shallnot be less than 15 mm, 90 mm and 100 mm andwith minimum reflective area of 13 Sq.cm on eachside and the slope to the base shall be 35 +/- 5degree. Each reflector shall have a CIL not less thanvalues specified in Table 2 of said MORTH circular. Thestrength of detachment of the integrated cylindricalshanks, (of diameter not less than 19 +/- 2mm andheight not less than 30+/- 2 mm) from the bodyis to be a minimum value of 500 Kgf. Fixing will beby drilling holes on the road for the shanks to goinside, without nails and using epoxy resin basedadhesive as per manufacturer’s recommendationand complete as directed by the engineer. Themarker shall support a load of 13635 Kg tested inaccordance with ASTM D4280 and confirming to IRC35 - 2015 guidelines and MoRT&H specification 804etc., complete

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work. Gopurams upto 50' - 0' height

Labour Charges for Dressing and Fixing Cut stone

Uba beedam

Ubhanavari

kandavari

Kabonavari

Adhistanam

Padha vari

jakathi kumuthagavari

Pattiya vari

Paatham

asvapatham

kodavari

Palagai vari

Bothiyal vari

Prastharam

Uthravari

Kabhothagavari

Ulvari

Steps

Viyalvari

chitravaram

Nilaikal

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

One Floor

Supplying, laying and jointing UPVC Pipes of the following dia of approved quality and best variety above ground level including fixing of UPVC Specials but excluding cost of such specials and cutting and threading of pipes but including fixing to the wall with necessary clamps and screws, Teak wood plugs making holes in the wall (or) drilling holes in the roof and making good of the disturbed portion to the oriUPVCnal condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. etc., complete complying with standard specification.

32mm dia UPVC pipe

25mm dia UPVC pipe

Supplying and fixing in position best quality PVC waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass complete complying with standard specifications (for both internal and external water supply arrangements). The pipe to be used on work shall be got approved by the Executive Engineer before use on work.

75mm dia PVC pipe

Supplying and fixing in position first quality and approved variety of GI wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing in position first quality and approved variety of Gun metal Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications

Supplying and fixing in position 20mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive EnUPVCneer before use on the works)

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped riUPVCd PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also UPVCving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to oriUPVCnal condition etc. complete complying with standard specifications.

Supplying and fixing in position Indian water colour closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 Part XII with sand cushion and forming flooring alroundthe closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without quality with 'P' trap or 'S' trap confirming to IS:2556 - leakage etc., complete complying with standard spcifications.

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position best Indian make Wash hand basin of size 550mm X 400mm and approved brand and quality with a pair of C.I. Brackets fixed to wall with necessary teakwood plugs and brass screws one No. of 15mm C.P. Pillar tap 32mm C.P. Waste coupling, rubber plug and chain, 32mm G. I. Union, 32mmG. I. Waste pipe 15mm dia G. M. Wheel valve 15mm brass nipple and nylon connection including cost of white lead TW Plugs clamps, rubber washer, etc., complete (The wash hand basin should be got approved from the Executive Engineer before use on works).

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110 mm PVC Pipe

75 mm PVC Pipe

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement complete complying with standard specification. (The gully Trap should be got approved by the Executive Engineer before use on works).

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing of Health faucet including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use).

supplying and fixing of marble of 0.61*1.22m.,18/20mm thick in all floors for urinal partition including for labour charges for fixing and polishing etc.,

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and Fixing the PVC water tank super thick of approved quality and best quality conforming to ISS and with ISI mark of the following sizes including cutting threading and fixing PVC specials but excluding cost of such specials.etc., complete complying with standard specification.

Supplying and fixing of prepainted Galvanized iron PUP PANEL 50 mm thick Roof covered with Top sheet heat resistance at bottom layer of polyurethene bottom of GI Sheet - colour coated - Galvanuume sheet the cost including all material cost, fixing , labour charges , cost of self threaded screws, Conveyance charges etec. complete as directed by departmental officers . The open edge of pupsheet covered with Galvanume sheet tightly

Supplying and fixing Relevant steel tubular box section including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

UGT/OHT (inside) waterproofing with Anti microbial Coating Waterproofing: Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface of the UGT/ OHT tank applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break >120% as per ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. Followed by applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Mortar on as protective plastering @ 29kg/m2. The material having Compressive strength of 38 MPa at 28 days as per EN 12190, Adhesive Bond Test, >1.5 Mpa as per EN 1542, followed by Water curing by sprinkling water for 3 times a day for 5- 7 days. Followed by applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having antialgae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA, having mixing Ratio (Base: Hardener: Water) – 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification

Supplying, laying and jointing glazed stone ware pipes of the 150mmdia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications. (Earth work excavation, re-filling with excavated earth will be measured and paid separately).

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Supplying, laying and jointing RCC Hume of the 300mm dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete complying with standard specifications.

Geophysical Investigation charges for carrying out new borewell etc, complete

Drilling of 150 mm dia bore well in Hard Rock area using DTH rig including cost of transportation charges for rig and others supporting vehicle etc.

150 mm CM type

150 mm Bore Cap MS

150 mm dia Casing Pipes assembly

125 lpm x 125 m head

Supply and delivery of 2.50 Sq.mm PVC insulated and sheathed 3 core flat type copper cable confirming to IS 694/1990 with ISI mark.

50 mm GM Non Return Valve

50 mm GM gate valve

50 mm Flange set

50 mm dia GI pipe

50 mm dia UPVC column pipe for downward extention of pump

50 mm GI Coupling

50 mm GI bend

50 mm GI Union

50 mm MS Clamp set

32 Amps Porcelain fuse unit (500 V)

Supply and run of 4 x 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains

Supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains

Labour charges for Errection of Supplied Submercible Pump Set in Deep Bore Well including connection of submercible cable all charges

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 4 x 25 sq.mm. LTUG armoured cable with earth connection

Supply and providing cable end termination of 3-1/2x25sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 10 sq.mm PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm PVC insulated SC unsheathed copper wire with painting of suitable colour.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 1 of 8SWG Copper wire in suttabe PVC Rigid pipe on wall/ floor/ground/Earth connection

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 12 way Single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 2P MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way vertical triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductorcable o f1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boxin flush with wall with 5AFT switch covered with hylumsheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for open PVC light point / fan point (for electronic regulator)

Wiring with 3x1.5sq.mm. PVC insulated SCunsheathed FRLS copper conductor of 1100 Vgrade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TWswitch box and 5AFT switch (two way) with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC straircase light point

Supply and fixing of 7w/9w w LED BH point

Supply and fixing of 4' 20W LED tube light fittings completed TW round blocks on wall or ceiling with connection with PVC unsheathed copper leads for terminals to the fitting

Supply and fixing of 15W LED COB Spike light fitting on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higer End)

Supply and fixing of 15W LED Wall washer light Up/down light fitting onWall with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 30W LED flood light fitting with angle iron frame work on the existing post /wall with PVC unsheathed copper leads with painting.

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

Supply and fixing of 50W LED flood light fitting on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higer End)

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600mm down rod on the existing fan clamp

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour

Supply and fixing of 2nos.6A two module 5 pin socket, 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1nos.16A two module 5 pin socket, 1 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 32A DP MCB switch in sheet steel enclosure with necessary electrical connection.

Sub total

SUN AND BLACK FLOWERS (BID ID -1450706)