Construction of Block Public Health Centre in Kariyapattinam Panchayat in Vedaranyam Block in Nagapattinam District

Amount

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" and conveyance of all materials to site and all labour charges etc complete

I. Foundation and Basement

II. Superstructure- Ground floor

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).

I. Upto Basement

II. Above Basement

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

I. Upto Basement

II. Above Basement

Providing Granolethic floor finish in CM 1:2:4 mix using 10-12mm ISS HBG Metal to 25mm thick including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm

Paving the Floor with Vetrified tiles in CM 1:3 20mm thick

Paving the Floor with designed ceramic tiles size 305x305x6mm in CM 1:3 20mm thick

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick

Dadooing with glazed tiles of size 200x200x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required size

Finishing the top of the roof with one course of Machine Pressed Tiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification

Plastering with CM 1:3,10mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Solid PVC Door shutter using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable suitable rebate for housing the shutter.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing fabricating and fixing M.S.Grills windows and ventilators gates ladders rail pipe nosing angles with ms lugs in staircase step etc made out of ms rods ,flats ,angles,pipes channel etc including necessary features complete as per drawing specification as directed by the engineers

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Colour Washing two coats with Oil Bound Distemper over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete

Plastic Emulsion Paint two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete

Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete

ELECTRICALWORKS

Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidIy fixed on wa|I covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (SOOV), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insult ted copper wire with earth connec tion complete SD 131

Supply and fixing 16amps DP s»i tch with metal clad(side handIe) of 500 V with F & N on suitable tea k wood Board of size 30cmx20cmx6 cm incIud ing necessary internal conection,ea rth connection etc.,complete (SD 142)

Supply an tixing o 6way SPDB of 16A /way with 16ADP switch with metal clad of SOOV with fuse and neutra (sidehandle) on suitable angle iron frame work with trunking box MS cableen try box with PWD earthing (SD 153)

insulated single core unsheathed co pper conductor cable of 1100 V grade w ith ISI mark confirming to IS: 694/1990 with continious earth connection by means of 1.50 sqmm PVC insula ted single core unsheathed copper conductor cable confirming Lo IS: 694/1990 in sLfiItab!e PVC ripid oioc 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived

Wiring with 2 x 1.S sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in s uitab Ie PVC rigid p.oe concealed in wall and ceiling with P\/C accessoires with +W switch box and EA FT switch in flush with wall with 3 mm thick hylum sheet cover for ma kins good of the concealed portion with suitable colour for PVC concealed fan point (for electronic regulator) SD 24

I tCB DISTRIBUTION BOARD

4 ways 3 phase DB No. of ways incomer MCB / Isolator - 4 No. of ways incomer ELCB / RCD - 4 No. of outqoinqs ways - 12 PWD SOR

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with doubledoor (metal) 1 No. 3 2A DP MCB as incoming and 6 Nos. 6A to 32A SPD CB outgoing in flush with wall andma king good of the concealed portion with earth connection only. Th e MCB DB and NlCB’s should be with ISImark (like standard make) (S D167)

Supply and fixing of 32A TPNMC switch with suitable angle iron frame work with M S cable entry boxes with earth connection only (SD164)

CABLE & END TERMINATION

SERVICE <UNNL< I ION A ?Et>sUK1ES L.T. 1100V PVC ALUMINIUM ARMOURED UNDER GROUND CABLE WITH ISI MARK

4 Core 16 sq.mm. PVC Armoured UG Cable (SD 203)

4 Core 10 sq.mm . PVC Armoured UG Cable (SD202)

Supply and fixing ofl brass cable gland for 4 x 25 sq.mm. PVC LTUG aluminium armoured cable with earth connection. fSDI8 51

Supply and fixing of brass cable glanc for 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with earth connection ISD1861

WIRING

Wiring with 2x1.5sqmm PVC insula ted single core unsheathed co pput conductor cable of 1100V gra de with PSI mark confirming to IS: 69R/1990 ir suitable PVC rigid pipe of 1.8mm thick with III mark concealed in wall and ceiling with PVC accessories in flush with wall including the cost of cable, pvc oiBE and specials, ceiling rose, IIush 'ype Sams SP mark switch, PVC jun;tic n box, 16gauge FIS switch box 100rr‹ m x 100mm x 7Smm covered by lamina rc°d hylem sheet 3mm thick, cement, labour and ma king good of concealed portion with suitable colour for concealed PVC LIGHT point. (SD 24]

Wiring with 2 x 1.5 sq.mm. ( 2 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid oipe concealed in wall and cei|ing virh PVC accessoires in flush with wall ’.’with 3mm thick hylum sheet cover with ”I”'V switch box and 5A FT switch and making good of the concealed por i on with suitable colour for PVC conccr ud light (6 points per coil) (for rooms libe bath, toilet & pumproom, etc.) (SD 23 )

Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unshea:In ed copper conductor of 11OOV grade in suitable PVC rigid pipe on wall a n d ceiling with PVC accessories and with switch box and 5A FT switch r o way) with painting of suitable cols ur with continuous earth wire connection of 14 SWG TC wire for open PVC strairce se light point (SD 27)

ups ly ano lix in g of 5A / 15 A I'm co m* incd flush type wall socket with 15A Flush type s Pitch concealed in suita bye M S Box in flush with wall and covered with 3 mm thick hylem shectf SD 138

Earthing as per the ISI specification with an uarth e lectroh of 2.10 metre Class ' B’ GI Pipe of daia not less than4Omm with copper ea r h o lv te of size 125mm x 50mm x 6mm w it h necessary funneling arrangements necessary masonry work and with 3Pmm RCC cover slab for the brick mason ry (SD233)

Supply and run of 1 of No.8 SWG GI wire for earth con section (SD74)

Supply and lixv ng of 18W LED 3000 K Square type resessed fiiitng (Philips/Havells) complete with T.W round blocks on 'laIf or ceiling with flu tube with PVC unsh cather copper leads from terminals to tñe filling (SI NO : 16) ELFCTR ICA L SO 7

Supp ly an d fixi Jq of single box type 4’36W fluorescc nt fitting complete with electronic ballast with TW round blocks on wall or ceiling ‹with flu tube with PVC unsheathed Copper leads from terminals to the fitting (SD87}

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K-Lite) suitable for 1 iW CFL (SD83)

Supply and fixing o( 1200mm (48")sweep AC ceiling fan complete with stepped electro nil 300W regulator with the existing down rod on the existing SD 110

Supply and fixinp of 1400 mm (56") sweep AC ceiling fan complete with stepped electronic regulator with 300 m m down rod on the e x isting clamp (SD 111)

Supply and fixing of SA / 15A 3 pin combined flush type wall socket with UA flush type switch on suitable TW Box (SD 136a

PLUMBING WORKS

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having bsl mark and providing lea kproof joints including fixing to the wall with P.V.C/ NI. S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R. C.C. works wherever necessary and ma king good the dismandled portion to the original

110mm dia pipe

Supplying and fixing of 1000 litters capacity PVC tank of approved quality including cost of al materials like tank fittings, lead .lift, errection etc

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete comp|ying with standard specifications

25mm Gun Metal Valve

32mm Gun Metal Valve

Suppling and fixing in position 15mm.diameter brass / C.P screw down tap / pillar tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and

Pillar Tap

P.V.C. Pipes ( 10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) o f approved quality and best variety conforming to I.S.S & with1.S. I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary

25mm dia Pipe

32mm dia Pipe

Supplying PVC Specials (with working pressure 10kg. / sq.cm.) in water supply arrangements (both ininternal and external water supply arrangements

Coupler

25mm dia Pipe

32mm dia Pipe

Elbow

:zsmm aia Pipe

32mm dia Pipe

25mm dia Pipe

32mm dia Pipe

25mm dia Pipe

32mm dia Pipe

End Cap

25mm dia Pipe

32mm dia Pipe

Reducer

25 mm x 20 mm

32 mm x 25 mm

Reducer Tee

25 mm x 20 mm

32 mm x 25 mm

Reducer Elbow

25 mm x 20 mm

32 mm x 25 mm

Set Nipple

25mm dia Pipe

32mm dia Pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirm ing to BIS and providing leak proof joints including fixing to the waIls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with + -W W nmm<Tfiw n€twwe /TW w nt /W psin io #Ww, , M Wm

PVC Elbow

110mm dia

PVC Elbow with Door

110mm dia

PVC Tee

110mm dia

PVC Tee with Single Door

11Omm dia

Supplying and fixing in position best qualityapproved make white 9lazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametreC.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 5mm dia brass nipple, 15mm dia nylon onnections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. ackets with teak wood plugs and screws and giving necessary water supply connection and

Supplying and fixing in position 15mm dia C.P.Shower rose & stop cock of proved make confirming to IS ecifications and qulity including cost of Shellac thread etc. complying with standard

CP Shower rose with CP stop cock

Supplying and fixing in position Indian make bewelled edge mirror of size 600 x 450mm quality

Supplying and fixing best approved quality BrassC.P / AI anodised Towel rail 600mm. long and 20 mm Diameter with brackets of same material including cost of Tea k-Wood plugs and C.P.Screws etc., complete complying with standard specifications(D)

Providing ra in water harvesting using 3 nos.of RCCwell rings of 90cm inner dia (clear) with Scm wal thickness made out of cement concrete 1: 2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 nos. of 6mm dia MS rod vertically and 3 nos. of 6mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a WAmI•N mF Qnmm sub I•nm mntzAuAN • i+U D TC eirr•i U#

Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C P screws etc comolete cOfT\DIvina with

Supplying and fixing in position european water closet of size 580 X 440mm, white glazed earthen ware of approved qua|ity with 'P' trap or 'S’ trap confirming to IS :2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brickjelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishin9 the top to required slopeand including giving necessary connection to cast iron soil pipes/ PVC pipes by dismand ling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original //WW +r,WW ...,+MW. +F US WWWA WFW WWNWTW+0 WWNWit.TWW

White EWC

Supply and fixinq of PVC. Nahini / Floor Trap withstainless Steel Gratings- 100 mm x 75 mm including all charges etc, complete as per standard specification.(D)

Construction of Toilet for Disabled

EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc.,including levelling the sites complete complying with standard speclficatTons and as directed. (Hard Soil )

Cement concrete 1:4:8 mix using 4Omm ISS metal including cost and conveyance of at materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Brick work in 1:5cm using country bricks standard size including cost and conveyance of all charges etc,complet.

Brick work in 1:5cm using country bricks standard size including cost and conveyance of all charges etc,complet.

Plastering with cement mortar 1:5-12mm thick including cost and conveyance of all charges etc,complet.

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum.

Colour washing two coats using approved colour pigments including cost and conveyance of all materials to site and all labour charges etc complete

Cost and Supply of precast RCC slab in 1:2:4 mix using 2Omm hbg metal for Roofing

Cost and Supply of steel door 1.10x1.80m

Cost and Supply of SS Hand Rail for Ramp and WC

Cost and Supply of EWC

Cubical arrangements for Lab interior

Provision for Furniture Arrangements etc ciomplete

Rain Water Harvesting structure

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

UDHAYAM CONSTRUCTIONS