Temporary restoration of roads from Sarore to Halsa Chak, Taraf Brahmana to Krail, link road at village Ratnal,link road to Kheri Kurwal , link roads to villages Soungli, Chak Suba, Chak Keshiv, Chak Chimna, Chak Umara, Chak Jawahir Singh, road from

P/L WBM grade-II with specified stone aggregates and binding material incl screening,sorting,spreading to template and consolidation with power road roller of minimum 8 ton capacity including carriage complete.Base course with 63-45mm size incl stone screening 13.20mm size

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and appllying tack coat using hot straight run bitumen of grade VG-30 including heating the bitumen spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. on WBM surface @0.75 Kg/sqm

Providing and appllying tack coat using hot straight run bitumen of grade VG-30 including heating the bitumen spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. on WBM surface @0.50 Kg/sqm

2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc.With paving Asphalt grade VG-30 with no solvent. complete (tack coat to be paid for separately).

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-30 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Providing and Laying River Bed Material by way of Spreading in uniform layer, watering, and compacting with power road roller 8-10 capacity including carriage of material with average lead of 15km. The measurement to be taken of compacted/ finished work.

Engaging of JCB as per requirement at site

Engaging labour as per requirement at site.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)