Repair work of 25 numbers of 16m High Mast Lights at 11 FSDs (Mokama, NRPA, Belouri, Katihar, Chanpatia, Phulwarisharif, Gaya, Buxar, Darbhanga, Jaynagar, Saharsa) under Bihar region

Supplying of XLPE Armoured cable with aluminium conductor of 1.1 KV grade confirming to IS:7098 (Part- I) 1988 with up to date ammendments of the following size as required. (a) 4 x 16 sq.mm

Supplying and drawing of PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 201 with up to date ammendments of the following size as required. (a) 5X4.0 Sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 4 X 16 sq. mm (28mm)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Triple pole and neutral

(b) Single pole and neutral

LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying,Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in orseparate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and overvoltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 BurningHours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/ 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (a) 200 watt

Supplying, installation, Testing and commissioning of 1.5HP motor,415 volt three phase, speed 3 mtr per minuts, 4 pole, B class, IP65 Protected, foot mounting moter along with chain spocate and chain fitted on motor shaft at site of work as required.

Supply of outdoor stand mounted feeder pillar Made of 14SWG CRAC Sheet Metal with enamel paint including 32A TPN MCB incomer, single dial time switch, 32 Amp TP Contactor for the automatic switching of luminaries, power tool control with 2 no.9A contactors and raise lower push button along with suitable Incoming & OutgoingTerminals as directed by the Engineer In-Charge.

Installation of the Mast Feeder pillar by grouting the stand in concrete & Cable laying.

Supply and Installation of LED type single dome aviation Obstruction light

Please Enable Macros to View BoQ information