Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.3 LAccepted-AOC | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹11.8 L+₹16,060.20 (1.38%)Rejected-Finance | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹12.4 L+₹75,760.98 (6.50%)Rejected-Finance | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L4₹12.6 L+₹91,149.90 (7.82%)Rejected-Finance OLD PULL MADIYA JAIRAMPUR AZAMGARH AZAMGARH UTTAR PRADESH 276001 | AZAMGARH | UTTAR PRADESH | 276001 | L4 | Rejected-Finance Not Lowest tenderer | |
| 5 | L5₹12.7 L+₹1.0 L (8.76%)Rejected-Finance | L5 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹13 L
EMD Value
₹26,000
Closing Date
7 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (E) FZR Cantt
GE (E) FZR Cantt
CERTAIN REPAIR TO MD ACCN OF M ZONE AND550 ACRE AREA UNDER GE (EAST) FEROZEPUR CANTT
2022_MES_551987_2
8037/GE/E/FZR/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
GE (E) FZR Cantt
Please refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (East ) Ferozepur Cantt
₹26,000
Yes
3 Jan 2023
15 Nov 2022
9 Dec 2022
15 Nov 2022
7 Dec 2022
25 Nov 2022
Amount
Demolition of un-reinforced cement concrete below or above ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and including screed bedding 15mm thick in cm(1:6),complete all as specified & directed.
All as per item No 3 here-in-before but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.
M & L Glazed Ceramic coloured tiles 300mm x 200mm x 7 mm thick primium quality on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified & directed.
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified & directed.
M&L machine cut kota stone flooring 20-25mm thick over & including 20mm thick screed bed in cement mortar 1:6, laid jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified & directed.
Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.
M & L Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, using WPC, surfaces finished even and smooth without using extra cement complete all as specified & directed.
M & L Rendering/plastering, 12 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified.
M & L Rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified & directed.
M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint complete all as specified & directed.
M & L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified & directed.
M & L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified & directed.
M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper complete all as specified & directed.
M & L for complete removal of existing treatment on wall and applying one coat of oil Bound distemper over coat of chalk whiting on plastered surfaces preparatory to distempering complete all as specified and as directed.
Complete removal of existing treatment over old surface, preparation of surface and applying two coat of Cement base paint on walls complete all as specified & directed.
Hacking out old broken glass n. exe 1.5 SQM (any thickness size, quality of description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.50 Sqm each including cutting holes of appropriate size for insertion blocks of cement concrete for hold fasts complete all as specified.
All as per item No 19 here-in-before but size exceeding 1.5 Sqm & not exceeding 4 Sqm each.
Taking down shutter of any description exe 1 sqm and not exc 2 Sqm complete all as specified & directed.
Re-securing or easing and adjusting of shutters of any description of exceeding 1 sqm but not exc 2 Sqm each complete all as specified & directed.
Takin down & Refixing to the same opeing shutter of any description exc 1 sqm and not exc 2 Sqm and complete all as specified & directed.
M & L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified & directed.
S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified & directed.
M & L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in bed blocks of hold fasts, coping etc including necessary form work complete all as specified & directed.
S & F 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.20(a) of MES Schedule Part-I in Section-8 complete all as specified.
S&F 35mm thick, 2nd class hard wood (Hollock), glazed and skelton shutters, open rebated and prepared to receive glass/ gauge etc divided in to squares with plain rounded mitered and rebated sash bars any numbers, fitted with cut and mitered beads for securing glass etc size of members as specified in clause 8.24 (a) of MES Schedule Part-I in Section-8, complete all as specified.
M & L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed.
M & L solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site complete all as specified in clause 8 B.2.1 of MES schedule Part-II (2004). Make: Rajshri or equivalent as approved.
S & F Pressed handle of mild steel, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified & directed.
Supply and fixed butt hinges, 100 mm long of mild steel, medium weight, cold rolled complete all as specified & directed.
S & F Barrel tower bolts of mild steel, stove enameled black, with bright bolt, 200 mm long and fixed with steel screws complete all as specified & directed.
S & F Sliding door bolts of mild steel, 300mm long, stove enameled black with bright bolt not less than 12mm dia with & including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed.
S&F 300 mm Mild steel helical door spring including roller and roller plate complete all as specified & directed.
S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and shown on drg No CEJZ/TD-1019/E8 & CEJZ/TD-1020/ E8.
S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified , including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified and shown on drg No CEJZ/TD-1019/E8 & CEJZ/TD-1020/ E8.
S & F Mild steel, fixed type ventilaters including projecting type hinges with steel handle and steel peg stay, complete with sash bars, dovetailed or welded as complete all as specified & directed.
S & F Plain sheet glass 3mm thick, ordinary quality and glazing, fixed with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified & directed.
S & F Figured glass, 3mm thick, pin headed type and glazing with oil putty in squares not exceeding 0.50 square metre each pane complete all as specified & directed.
S & F Wire cloth galvanised mild steel, 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.
M & L Painting to new wooden or wood based surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified & directed.
M & L Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & directed.
M & L Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint including preparation of surfaces complete all as specified & directed.
M& L for Preparation of old decorated surface of steel and iron of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M& L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S & F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified & directed.
S & F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified & directed.
S & F PTMT handle 125mm long fixed with steel screws complete all as specified & directed.
S&F in repair Water storage tanks 500 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank complete all as specified & directed.
S & F Ball valve of PVC, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed,complete all as specified & directed.
S & F Gun metal Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified & directed.
S & F Gun metal Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified & directed.
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified & directed.
All as per item No 54 herein before but 20 mm bore tubing.
S & F 15mm bore GI tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
All as per item above 56 herein before but 20 mm bore tubing.
Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified & directed. (Note:- serviceable tubing retrieved from item No 54 shall be reused.)
All as per item above 58 hereinbefore but 20 mm bore (Note:- serviceable tubing retrieved from item No 55 shall be reused.)
S & F in repair Stop valve of cast copper alloy chromium plated, 15mm bore, screwed down, high pressure with crutch or butter fly handle complete all as specified & directed.
S & F in repair Bib tap of cast copper alloy chromium plated, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.
S & F in repair Pillar tap of cast copper alloy chromium plated, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.
S &F in repair Bib tap, 15 mm of PTMT any colour screwed, for iron pipe and fixed (minimum wt 15mm-90 gms) complete all as specified & directed.
S&F in repair 15mm Pillar tap standard of PTMT any colour, fancy type, high pressure screwed for iron ppe and fixed as in repairs (Minimum weight15mm - 120 gms) complete all as specified & directed.
S & F in repair stop valve, bore dia 15 mm of PTMT any colour high pressure screwed for iron pipe and fixed. (minimum weight 15 mm -90 gms) complete all as specified & directed.
S & F as in repair PTMT shower Rose swivel type 125 mm size (minimum wt 40 gram) complete all as specified and directed.
Supply & Fix in repairs Squatting pan orrissa pattern vitreous china white of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore sand cast cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints etc complete all as specified & directed.
S & F in repair Vitreous China wash down water closet pan (pedestral pattern), White (excluding fixing bolts, flushing cistern and flush pipe), with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed.
S & F Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, incl bedding in cement mortar on to dwarf wall of incl fixing cantilever brackets and connecting union to pipe, overall size 410x330x160mm complete all as specified & directed.
S & F Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories and connecting to water pipe and EWC etc and fixed in repairs complete all as specified.
S & F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified & directed.
S & F PVC connection 15 mm size PTMT nuts of length 450 mm fixed complete all as specified & directed.
S & F in repair PVC waste pipe of 32 mm dia for Wash Hand basin/Urinals etc complete all as specified & directed.
S & F Towel rail 450 mm long of Brass Chromium plated 20 mm dia fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 170 gms) complete all as specified & directed.
Dismantling CI pipe/any type alongwith fittings of 75/100mm dia, below or above ground level, jointed in cement mortar and taking out complete all as specified & directed.
S & F PVC (SWR) pipes, Single socketed, of 110mm dia, in any length with rubber ring jointed in cement mortar and laid in trenches or in floors complete all as specified & directed.. (fittings measured separately).
All as per item above 77 hereinbefore but 75 mm dia pipe.
S & F PVC (SWR) pipes, Single socketed, of 110mm dia,, in any length with rubber ring jointed in cement mortar and fixed to walls complete all as specified & directed. (fitting measured separately).
All as per item above 79 hereinbefore but 75 mm dia pipe.
S & F PVC (SWR) bend (any radius), 110mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortar complete all as specified & directed.
All as per item 81 above here-in-before but 75mm bore.
S & F PVC (SWR), floor trap, 75mm bore, Plain with grating including jointing with solvent cement complete all as specified & directed.
S&F PVC rain water pipes 100mm bore including fixing to walls with MS clamps complete all as specified & directed.
Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified & directed.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified & directed.
M & L 10mm plaster in CM(1:4) finished even and smooth with using extra cement on bottom layer of batten roof using water proofing compound as per manufacturers instruction or 3% by weight of cement whichever is more (in case of re placement of bottom layer tile) complete all as specified & directed.( Note: WPC shall be measured and separately)
Supply only integral water proofing compound complete all as specified.
M&L for a tack coat of industrial bitumen 85/25 @ 1.50 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified & directed.
M & L 150 micron polythene film including preparation of roof surfaces complete all as specified & directed.
Mud phuska, 80mm thick average, consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified & directed.
M & L Brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of cruide oil by weight of cement and pointed flush complete all as specified & directed.
All as per item No 91 herein before but except brick tiles complete all as specified & directed.
Demolition of brick work built in cement mortar of any specification and in any position complete all as specified & directed.
M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radiuscomplete all as specified & directed.
All as per item 94 above here-in-before but using old bricks retrieved from demolition under item above here-in-before including cleaning and removal of mortar from old bricks.
M&L Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified & directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed.
M&L Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified & directed.
M&L for laying APP based polymeric membrane 3mm thick with minimum weight not less than 3 kg/sqm, reinforced with non woven polyster fabric (wt not less than 160 gms/sqm) torching Joints/overlaps with a propane or a butane gas torch,laid with a minimum overlap of 150mm with thermo fusable finish laid/bonded over a coat of hot blown bitumen 85/[email protected]/sqm,over forced application bitumen primer @0.30 litres per sqm,including preparation of plastered surfaces of Sunken portion ,complete all as specified and as directed.
M & L rendering 10mm plaster in CM(1:3) finished even and smooth with using extra cement on vertical surface of sunken portion wall and floor using water proofing compound as per manufacturers instruction or 3% by weight of cement whichever is more (in case of re placement of bottom layer tile) complete all as specified & directed. (Note:- WPC shall be measured separately and paid separately )
S&F PVC (SWR) pipes 75mm bore including fixing to walls as in spouts of sunken portion complete all as specified & directed.
M & L Cement concrete (1:5:10),type E-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified & directed.
M & L Mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.
M & L for PCC (1:3:6) type C2 (20mm graded stone aggregate) 50mm thick as in plinth protection including necessary form work complete all as specified & directed.
M & L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm garded stone aggregate for floor finish without using extra cement including necessary form work complete all as specified & directed.
Dismantling of boarding, any description, fixed in any position with nails complete all as specified & directed.
S &F Pre-laminated particle board, 18/19mm thick interior grade, having one side decorative lamination (approved shade) and other side balancing white lamination fixed in pelmet boxes, shelves , rebated or flat edges including 6 mm thick teak wood leaping all-round and fixed as in repairs complete all as specified & directed.
DHAWAN CONSTRUCTION COMPANY
M/S Pee Kay Builders
ABHISHEK AND COMPANY
M/s Bansi Lal
M/S CHAWLA CONSTRUCTION COMPANY
Kissan contractor and engg works
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .