Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹6.6 Laccepted-aoc | ₹6.6 L | accepted-aoc |
Tender Value
₹9.3 L
EMD Value
₹11,750
Closing Date
24 Mar 2026, 9:30 pmClosed
Agriculture Produce Marketing Committee
K H GURUPRASAD
Improvement Of Committee owned 6 Godowns in Main Market yard, APMC, Hubli under AAP 2025-26 (SC)
APMC/2025-26/BD/WORK_INDENT880
APMC/2025-26/BD/WORK_INDENT880
Reserved
Buildings
Two Tender Document System(Two Cover)
SECRETARY APMC Office HUBBALLI
2 documents required · 2 mandatory
PWD REG CERTIFICATE Class IV & above
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 Achieved in at least 1 financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.9.31 Lakhs. to meet tender capacity The certificate with UDIN is to be attested by a Chartered Accountant. Otherwise, the tender will be rejected.
SC CASTE CERTIFICATE
GST PAN ADHAR
₹500
₹11,750
24 Mar 2026
5 Mar 2026
25 Mar 2026
12 Mar 2026
Improvement Of Committee owned 6 Godowns in Main Market yard, APMC, Hubli under AAP 2025-26
Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...
Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Repairs to roof with available corrugated zinc sheets/ A.C.sheets with new J bolts, screws and washers etc., on existing reeper and rafters.
Repair of pull and push type rolling shutters of made of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel l...
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. as pe...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surfa...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in proper shape and replastering the surface of the wall inclu...
Renewing Glass panes, with putty and nails wherever necessary including racking out the old putty: Float Glass panes of nominal thickness 4 mm (weight not less than 10kg/m²)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
GODOWN NOTIFICATION.pdf
Others - notification • 0.37 MB
6 godown SC KW1.docx
Tender Document • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .