MP Fund Melachokkanathapuram Town PanchayatSupply and Erection of High Mast Light

Amount

Supply and Delivery of High Mast width8 No 150 watts LED fitting M2138 Page No.161 of SOR 2023-2024

Supply and Fixing of brass Cable gland 3-1/2 X25 Sqmm PVC Armoured LTUG Cable with earth Connection SD 186

Supply and Fixing of brass Cable gland 4 X25 Sqmm PVC Armoured LTUG Cable with earth Connection SD 185

Supply of Control panel / feeder pillar box housing suitable control circuit for operation of the HIGH – MAST ON and OFF in time it also consist of suitable control for the power tool motor and timer switches 2 Nos complete as per standard specification.

Erection of feeder pillar box using supporting angles / pipes, clamp set and necessary suitable wiring and with suitable masonery work etc complete

Supply and fixing of TNEB Meter Board Suitable for 3 phases 100A service Connection made up of suitable angle iron frame work if size 2 feet X 1 ½ feet using angle iron of size 1 ½” x1/4” rigidly fixing on wall covered with hylem sheet of size 2 feet x 1 ½ feet of 12 mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 100 A fuse units (500V) 1 No. Neutral link. copper earth flat of sixe 1” x ¼ with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete SD No 130

Supply and fixing of 100 Amps TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with earth connection only SD 169

Earthing as per PWD std specification with an earth electrode of 2m class B GI pipe dia not less then 32mm complete with necesaary masonery work SD 234

Supply of aviation obstruction lights of type BJAOL 2 or equivalent etc complete as per standard specification.

Fixing of Fled light luminaries in the lantern carriage including internal wiring etc complete

Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.

Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Rein Forced Cement Concrete 1:1½:3 Mix (one Part of cement, One and half Part of M- Sand and three Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Brick Work in Cement Mortor 1:5 Mix (one cement, five M- Sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 10 M3)

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

MODERN ENGINEERING WORKS