PROVN OF CLOTHING AND RATION STORES OF 124 INF BDE CAMP AND SPECIAL REPAIRS TO TOILET AND BATHROOM SITUATED NEAR BLDG NO T-109 (SAPPS) OF 14 GRENADIERS AT NAMKUM MIL STN UNDER GE RANCHI

Amount

Excavation in trenches in soil n.exc 1.5 m wide and n.exc 1.50m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out, complete all as specified and directed.

Surface excavation in soft/loose soil n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out , complete all as specified and directed.

Removing excavated material exc. 50m but n exc 250m and depositing where directed at a level n.exc. 1.5 m above the starting point, complete all as specified and directed.

Returning filling in incl spreading leveling watering, well ramming in layers n.exc 25 cm hard/dense soil, complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded aggregate in foundation, filling and mass concrete, complete all as specified and directed.

M&L 40 mm thick damp proof course of cement concrete 1:2:4 type B-0 using 12.50mm graded aggregate horizontal or vertical surfaces including necessary form work, complete all as specified and directed.

M&L reinforced cement concrete1:2:4 using 20mm grared aggregate as in coping, beams, cantilevers, bressummers, Lintels over 1.5 m span etc, complete all as specified and directed.

Form work to rough finished flat surfaces as in sides and soffits of beams, lintels, coping etc, complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips, complete all as specified and directed.

All as per item No 9 above but 6 to 8 mmmm dia and over in stirrups, spacers and binders, complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6, complete all as specified and directed.

M&L 10mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement), complete all as specified and directed.

M&L 15mm thick cement plaster on fair faces of bricks work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement), complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20mm thick over & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

All as per Item No 15 above but as in Skirting with 10mm thick rendering in CM 1:3.

M & L broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) in sub base, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3, complete all as specified and directed.

M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc, complete all as specified and directed.

M&L wind tie MS, flat iron roof sheet, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chhaja, etc fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in ridge,etc with self tapping screws or J hooks, complete all as specified and directed.

M&L for providing aluminium snap Grid frame work for false ceiling with of size 595X595 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's , complete all as specified and directed.

M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed.

S&F steel windows with side hung shutters incl box type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long and one peg stay on each leaf complete with glazing bars, dovetailed or welded, complete all as specified and directed.

All as per item No 26 above but without glazing bars, complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, incl hings also fastening and fixing, complete all as specified and directed.

S&F 1.00mm thick Mild steel, plain, black sheet in covering to door shutters; covering to door chowkats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc, complete all as specified and directed.

M&L for hold fasts; wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165, complete all as specified and directed.

M&L cement concrete type C-1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc, complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 3.00 mm thick plain Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work, complete all as specified and directed.

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 , complete all as specified and directed.

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer, complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block 60mm thick with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade, complete all as specified and directed.

M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed.

Dismantling AC/ CGI/ translucent ( corrugated, semicorrugated, etc), as in roof covering, complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position, complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each, complete all as specified and directed.

All as per item No 41 above above item but exc1.5 Sqm but n.exc. 4 Sqm.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc, complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame, complete all as specified and directed.

S&F 4 mm thick frosted glass pin head type and glazing with aluminium bead in squares n exc 0.5 Sqm in each pane etc fixed in aluminium frame, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed.

S&F Aluminium anodised handles of extruded section and fixed 125 mm long, complete all as specified and directed.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water, complete all as specified and directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete, complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6, complete all as specified and directed.

M&L rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces and finished even and fair without using extra cement, complete all as specified and directed.

Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed.

M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc, complete all as specified and directed.

M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 300 x300 x7mm thick in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified and directed.

M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors, complete all as specified and direct

Demolition of cement concrete reinforced as in chullah hoods ,Chajjas , lintel band, shelves and plate form etc complete all as specified and directed

M&L for RCC as in kitchen platform, Drain cover, shelves type B-1 1:2:4 (20 mm graded aggregate) including necessary form work, complete all as specified and directed.

M&L for Formwork to soffits , sides, edges of concrete flats etc, complete all as specified and directed

S&F mild steel deformed bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc, complete all as specified and directed.

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer, complete all as specified and directed.

Taking up or steel tubing & connections including cleaning for refixing, dia of pipe 15mm, complete all as specified and directed.

Taking up or steel tubing & connections including cleaning for refixing, dia of pipe 20mm, complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore, complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore, complete all as specified and directed.

Cutting chases in brick wall, etc for concealed water tubing ,etc & making good in CM 1:3 , cutting not exc 10 cm girth, complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor, complete all as specified and directed.

S & F in repair 10 ltr capacity PVC valve less symphonic action type Flushing cistern low level white with inlet, ball valve ,float valve & handle Including bracket & flush pipe and bracket fixed to wall, complete all as specified and directed.

S&F in repair 15mm dia chromium plated fancy type bib tap fixed to iron pipe etc complete all as specified and directed.

S&F pillar tap cast copper alloy fency type with capastan headsm chromium plated screwed down high pressure with or without lettered “HOT or “COLD” with long screwed shanks and fly nuts, screwed for iron pipe make ESSCO.

S&F in repair soap dish vitreous china white approximate size 160x160x90mm, fixed to plug with chromium plated brass screws, complete all as specified and directed.

S&F in repairs 15 mm dia concealed type stop cock/angle cock fancy type chromium plated etc complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling, complete all as specified and directed.

S&F in repair 15mmx450mm PVC connection pipe fixed to iron pipe etc, complete all as specified and directed.

S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges inluding brackets, complete all as specified and directed.

S&F in repair PVC (SWR) nahani trap, plain with grating including jointing with solvent cement 75mm dia etc, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint laid in trenches, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall, complete all as specified and directed.

S&F PVC(SWR) 110 mm bends any radius.

S&F PVC(SWR) 110 mm junction single, (single T) equal or unequal .

S&F PVC(SWR) 110 mm Vent cowl .

S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

S&F PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms), complete all as specified and directed.

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc, complete all as specified and directed.

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc, comlete all as specified and directed .

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with conceled Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch withsunken box of suitable size incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly , complete all as specified and directed.

All as per item No 90 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmmwire with 1.5sqmm earth wire.

All as per item No 90 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmmwire with 1.5sqmm earth wire.

All as per item No 90 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way. (Make : Anchor/Havells/ABB ( ISI marked)

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose). Make : Anchor/Havells/ABB( ISI marked)

S&F Socket 15 Amps flush type 230 Volts , AC , complete all as specified and directed. Make : Anchor/Havells/ABB ( ISI marked)

S&F switch 15 Amps flush type 230 Volts , AC, complete all as specified and directed. (Make : Anchor/Havells/ABB( ISI marked)

S&F ceiling rose, surface backlite, 65x50mm, three terminals, complete all as specified and directed. Make : (Make : Anchor/Havells/ABB ( ISI marked)

S&F 5 step fan regulator single pole, 240 Volts, complete all as specified & directed. Make- Anchor/Havells/ABB

S&F angle lamp holder PVC/Polycarbonate base / back suitable for LED lamp. Make : Anchor/Havells/ABB( ISI marked)

S&F celling fan 1200mm sweep 240V AC Supply ISI marked 5 star. Make- Havells/Bajaj/Crompton

S&F LED bulkhead with 10W with IP 65 protection 240V. Make- Bajaj /Havells/ Crompton

S&F LED bulb 10 Watt suitable for angle lamp holder base B-22 230V, complete all as specified and directed. Make :-Crompton / Phillips/ Havells

S&F 20W LED 6000K (4’) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed. Make : Crompton Havells bajaj

Supply & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed & directed. Make- Grandlay/Havells/Finolex

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 08 ways. Make:-Havells / Legrand / L&T .

S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc, complete all as specified and directed.

S&F MCB SP 06 to 40 Amps 415V incl all termnials, fitting etc, complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trences., complete all as specified and directed.

S&F for old size brick well burnt, laid flat, for cable protection complete all specified and directed.

Excavation in trenches n. exc 1.5 m wide & n. exc 1.5 m in depth for laying under ground cables/erection of pole and getting out in hard/dense soil, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.

Removal of excavated surplus material (Soil) to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point, complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separetly including making good the disturbed portion/surface, complete all as specified and directed.

S&F LED Mirror Light 10 Watt with diffuser, Decorative type, complete all as specified and directed. Make :-Crompton Phillips/ Havells

Dismantling and taking down existing unserviceable cable of any size and making good to disturbed surfaces to match the existing surfaces, complete all as specified and directed.

Supply & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 06 sq mm 2 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, ccomplete all as specified and directed. Make- Polycab/Havells/Finolex

Taking down unservicable main switches MCB's DB's etc any type and capacity including making good the disturbed surfaces to match the existing, complete all as specified and directed.

S&F exaust fan heavy duety metal body 350mm sweep 240 V, complete all as specified and directed. Make Havells Bajaj Crompton

M K Enterprises

M/s Dwarika Nath Singh

BHARATI ENTERPRISES

ISHAAN ENGINEERING

BUILDCON ENTERPRISES

india trading company

M/S ABDHESH CONSTRUCTION