Conversion of IWC to EWC in flats of various categories of DAE residential buildings under TTM-II and other locations at Anushaktinagar, Mumbai

Amount

ABSTRACT SHEET

PART A : MAIN ITEMS

PART B: REBATED ITEMS

Description of Work / Item(s)

Amount

PART A : MAIN ITEMS

Providing and fixing EWC closet suit comprising : a) European water closet with 'P' or 'S' trap similar to Model- Slick of M/s Hindware (Cat No. 20011) or approved equivalent make Sanitary ware in white glazed vitreous chinaware b) Solid plastic heavy quality seat with lid similar to M/s. Hindware or approved equivalent and including cost of removing the existing one & disposing of debris in sidecolony etc complete all as per specification and as directed by the Engineer-in-Charge.

Supplying and fixing following size PVC-SWR pipes and Fittings for soil, waste,vent and rainwater pipe lines consisting following items of work:-i) Supplying PVC - SWR pipes and fittings conforming to IS 13592 of approved make and standard PVC clamps ( approx. 3.2 mm thick ) and nails or MS galvanised clamps having minimum 3 mm thick for fixing the pipe.ii) Fixing the pipeline vertically to plumb, keeping the pipe barrel 50 mm away from the wall face, using PVC or MS galvanised clamps. iii) Jointing the PVC pipes and specials by PVC solvent cement, rubber lubricant with rubber rings or any other approved equivalent method. iv) Laying the pipeline below the ground to proper slope and gradient for making connection of soil and vent pipeline ( Vertical stacks ) with inspection chamber or manhole and waste water pipeline with gully trap chamber including the cost of cement mortar, water proofing compound etc., testing the vertical pipeline by smoke test and horizontal pipeline by 600 mm head of water and rectifying the leakages, if any all complete incuding encasing the pipe line using CC 1:3:6 as per drawing and as directed by EIC etc. all complete. v) Cutting or making hole in RCC or brick work and reinstating the surface to it's original condition after passing the pipe with cement mortar / cement concrete etc. by adding approved water proofing compound. PVC - SWR Pipe & Fittings ( TYPE-B )

a) for 75 mm dia.

b) for 110 mm dia.

Providing & fixing PVC Nahani trap of self cleaning design with 75 mm outlet having a minimum water seal of 50 mm with SS Grating on top including necessary 1:2:4 cement concrete for embedding the trap, conforming to IS:3989, including removing the existing one & depositing to deptt stores etc complete all as per specifications and as directed by the Engineer-in-Charge.

Providing & fixing G.I. Pipes 'C' class Providing, laying, jointing, fixing & painting heavy quality (Class 'C') M.S. Galvanized pipes as per I.S. 1239-1968 including fittings like elbows, collars, tees, unions, comp lings, reducers, enlargers, bends and all other fittings required for the completion except screwed flanges conforming to I.S. 1239-1968 & also as per the code of practice of water supply in bldgs. Of I.S. 2065-1972 including laying under floors, chasing, in walls, roof slabs and making good the same to the original conditions, including the cost of all jointing materials like hemp yarn, white or red lead, clamps, wooden gutties, screws, cement, sand etc. including painting the pipe with coats of synthetic enamel paint over a coat of Primer & wrapping hessian cloth in concealed portion including removing the old damaged G.I. Pipes & handing over to Deptt. Stores, scaffolding, testing the pipes etc. complete all as per specification and as directions of the EIC.

a) 15 mm dia.

b) 20 mm dia.

c) 40 mm dia.

Providing & fixing C.P brass long body Bib tap 2 in 1 similar to . FLORENTINE Series' of ' JAQUAR' cat. No. 5041 including providing and 'fixing Health faucet with 1.0 mt long flexible tube and wall hook ( JAQUAR make Cat. No.573)

Providing waterproof brick bat coba for filling in the depression of toilets, bathroom etc. as per the specifications of specialised waterproofing agencies and finishing the surface even so as to be suitable to receive the tiles etc. including removing existing brick bat with water proof plaster & disposing off debris in sideColony etc complete all as directed by the Engineer-in-Charge.

Providing chemical based water proofing of M/s Indofil chemicals/ New coat of Dr. Fixit as approved over bath/ WC brick bat coba & other locations as per the following procedure: a) Cleaning completely cleaning to remove all dirt with wire metal brush. b) Applying a coat of Indofil MC-76/ New coat of Dr. Fixit (diluted with clean water as per recommendations of manufacturer) over the entire area to be treated including filling up of cracks, if any with CM-1:3 mixed with water proofing compound. c) Applying a bond coat with MC-76/ New coat of Dr. Fixit mixed with cement in 1:1 ratio i.e., 1 part of MC-76/ New coat of Dr. Fixit and 1 part of cement. d) Providing and spreading of polycon based fibrous water proofing net for entire area including lapping as per manufacturer's specifications immediately after applying bond coat and curing. e) Applying one more bond coat with MC-76/ New coat of Dr. Fixit mixed with cement in 1:1 ratio i.e., 1 part of MC-76/ New coat of Dr. Fixit and 1 part of cement over the polycon based fibrous net. f) Applying two coats of flex top coats with indofil flexcoat/ New coat of Dr. Fixit mixed with 85 parts indofil flex coat/ New coat of Dr. Fixit and 15 parts clean water. Notes: (i) The entire work shall be carried out a per manufacturer's specification and as directed by the Engineer In Charge. ii) The contractor shall furnish guarantee bond on appropriate stamp paper in the proforma as per Appendix 'D' for the entire waterproofing treatment for maintaining the surroundings and under side surfaces of the waterproofing treatment in bone dry condition for 5 years. During the guarantee period the contractor shall attend all leakages, defects etc. if noticed, free of cost, starting the work of checking up and rectification within a week's time from the date of intimation about such leakages/ defects.

Supplying & fixing 25 mm thick PVC integral foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 nos 100 mm heavy duty S.S. hinges and 2 Nos. 100 mm heavy duty aluminium baby latches, 2 nos. of 100 mm Al. Bow handles with back plate of M/s Shalimar Hardware or equivalent and including providing a vision panel opening of size 300 mm X 200 mm including providing and fixing PVC moulded louvers on both faces in the opening of vision panel with ss screws, all edges to be smooth finish with mixture of PVC powder & solvent, including removing existing door shutter & fittings etc complete all as per specification & as directed by the Engineer-in-Charge. Note:- 1) The entire door shall be jointless shutter. 2) The sizes shall be approximately 650 mm x 2000mm, however exact dimensions shall be measured at site before manufacturing.

Carefully removing existing single leaf PVC door shutter and properly cutting it vertical in two for making it foldable shutter by providing & fixing heavyquality 25 mm wide and 1 mm thick SS piano hingeand refixing the modified shutter into position & including providing and fixing one number heavyquality aluminum tower bolt of 150 mm size and including all necessary screws, cutting, planning etc.complete all as per specifications and as directed by the Engineer-in-Charge.

Removing carefully the existing PVC door shutters and refixing the same to its position after laying new tiles on flooring including cutting the shutters at bottomportion as per site condition if required, etc. completeall as directed by the Engineer-in-charge.

Providing and fixing PVC flush pipe Everlast or equivalent of 32/40 mm dia to a length 2.25 M (approximate) and connecting to the flush tank with proper brass check nut and connecting to the W.C. pan and making leak proof joints of flush and W.C. ends and including removing the existing one etc complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing approved quality 10 Ltrs. capacity PVC flushing cistern of Hindware Sleek Fresh with odorizer slot having single flush white colour or approved equivalent with all internal non ferrous fittings, pull chain including P&F inlet PVC connectors of approved make and quality and outlet connections and wall mounted on brackets, including providing and fixing PVC flush pipe Everlas or equivalent of 32 / 40 mm dia. to a length 1.00 M (approximate) and connecting to the flush tank with proper check nut and connecting to the W.C. pan and making leak proof joints etc., including cost of making chases in the wall, floors, removing the existing one depositing to deptt. Stores etc.complete all as directed by the Engineer-in-Charge.

Removing the existing flusing cistern and re- fixing the same in position to suitable locations at required height by providing & fixing with necessary fittings and fixtures .etc. complete all as directed by the Engineer-in-charge.

Providing & fixing on Exposed or concealed surfaces the following dia Chlorinated Polyvinyl Chloride (C-PVC) pipe of specified class of M/s. SUPREME / PRINCE or other approved equivalent consisting following items of work:- i) Supplying & fixing C-PVC pipes, including necessary all fittings conforming to IS 15778 ii) Laying and fixing the pipe and specials on exposed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/screws, rawl plugs, wooden gutties and branded clamps of Supreme/Prince make to the pipeline as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers catalogue for leak proof joint or as per relevant code iv) Making leak proof threaded / solvent joints. including cutting the pipe, Joint preparation, cleaning, marking, application of solvent, assembling, curing etc. and the cost of jointing cement solvent materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. proof joints. vi) Providing and fixing C-PVC jointable / threaded fittings such as Union, Nipples, Bendes, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc vii) including removing existing GI pipe line with fittings and specials etc incuding handing over to dept stores. Note:- All brass threaded elbows and fittings shall be with additional support type of M/s. Prime, Supreme or other equivalent approved by EIC including necessary fixing arrangement such as screws, plug etc complete. ( Mode measurement :- The measurement shall per Unit RM length of pipe line laid or fixed. The measurement shall be taken along centre line of pipe. No measurement shall be recorded separately for fittings etc. ) SDR 11 Pipes and Fittings

a) 15 mm n.b

b) 20 mm n.b

c) 25 mm n.b

d) 40 mm n.b

Demolishing brick /stone masonry in cement mortar and plaster at all floors & levels including scaffolding, stacking of serviceable materials & disposing of unserviceable materials in sidecolony etc. complete all as per specification & as directed by the Engineer-in-Charge.

Plain cement concrete in C.C 1:2:4 using graded stone aggregate of 20mm max. size, including necessary formwork,machine mixing,transporting,placing,consolidating, finishing, curing, etc complete all as per specifications & as directed by the Engineer-in-charge.

Providing & laying at all floors & levels first quality ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JHONSON (INDIA) Ltd. or euqivalent approved make of approved colors, shade and texture in flooring / dado / skirting as per approved pattern. incluidng cost of all materials, including cutting the tiles to required shape, wastage, pointing the joints with white cement mixed wirh matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc.and including removing existing flooring / dado and disposing of debris in side colony at designated location complete all as per specifications, relevent IS code & as directed by the Engineer- in- Charge.

a) In flooring with tiles of size 300 x 300 (approx. size) & minimum 7 mm thickness Digital HD series of M/s. H& R Johnson or equivalent approved make with 20 mm thick 1:4 Cement mortar bedding. (Using factory made Ready Mix Mortar only)

b) In dado / Skirting with tiles of 300X450mm (Approx size) of Digital HD Series of M/s H&R johnson (India) Limited or approved equivalent fixed over 12 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) backing / fixed directly over existing tile with polymer cum cement based tile adhesive manufactured by M/s. Roffe construction (Non-Skid Ahhesive, NSA) or M/s Ardex Endura (Gold Star) or other approved equivalent, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting/dado etc. complete.

Providing and fixing in position at all floors, levels / heights 18 mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length / height of approved shade, finished sizes as directed including machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with cm 1:4 (Using factory made Ready Mix Mortar only), 20mm backing & overlapping of 20mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, including removing existing door frame, shutter & fittings etc.and depositing the same at dept store etc. complete all as per specifications, drawings & as directed by the EIC. Note:- 1) All finished natural stones except for floorings shall be applied with araldite or equivalent stone adhesive on back surface ,spreading/splashing of sand particles on adhesive applied surface before a day of fixing of stones. 2) Door/Window jamb, cill & lintel bottom with granite / gren marble shal be mitred / partly mitred joint as directed by Eingineer-In-Charge. 3)Exposed surface on Elevation & exposed vertical finished face shall be measured for payment in sqm. Overlapping & edges etc shall not be measured. Note :Exposed surface on Elevation & exposed vertical finished face shall be measured for payment in sqm. Overlapping & edges etc shall not be measured.

a) Jet Black Granite Stone.

b) Baroda Green marble Stone

Repairs to damaged RCC structural members at all locations/ floors using polymer modified cementatious mortar, for strengthening the existing RCC structural members using acrylic based polymer and comprising the following operations: 1. Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site,simultaneous transportation and disposed at a location in Anushaktinagar as identified by EIC. complete all as per specifications and as directed by the Engineer-in Charge. 2. Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by acetone /rust remover of Dr. Fixit / Anuvi chemicals / Fosroc or other eqivalent. 3. Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars. 4. Polymer required for the work shall be procured by the Agency from approved Manufacturers Like M/s Astra , M/s Anuvi, M/s Apcotex or other approved equivalent manufacturer confirming to technical requirements as below and the invoices/challans etc to be submitted to EIC for record. Appearance: Milky white Ph- value : 9-10 Specific gravity : 1.055+/-0.005 Solid contents(%w/w)-: 44+/-1 Viscocity at 25 degree C temperature (in sec): 15-20 Testing of the material as per relevant codes at NABL approved third party Lab. is to be done by the Agency for every batch/lot of supply. 5. Bond coat should be applied @ 0.37 ltr./layer/sq.m. 6. Minimum FM of silica sand should be 2.10

a) Building up with polymer modified cementatious mortar for RCC structural members etc. in layers not exceeding 20 mm in a day (proportion – cement 50 Kg. : Silica sand 125 Kg. : polymer liquid 10 ltrs.) with necessary bond coat (polymer : Cement = 1:1 by volume) for tack coat and also for subsequent layers using polymer including curing, covering the flooring /window with tarpaulins or equivalent covering material to avoid deposition of polymer mortar and cleaning of floor / windows thoroughly on completion of repair work etc. complete all as per specifications and as directed by the Engineer-in-charge. Polymer used for this work in KG shall be measured for payment.

Cement plastering using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with POP over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification and removing existing damaged/ worn out plastering and disposing off debris in side colony at designated location etc. complete all as per specifications and as directed by Engineer- in- Charge.

a) 12 mm thick

b) 15 mm thick.

Providing and applying one coat of cement based grey putty of M/s Roofit mix or other approved equivalent make over entire surface including prepraring old painted surfaces by thoroughly scrapping oil bound distemper / acralic emulasion / white wash eyc. filling up the cracks, crevices, depression, holes, spray curing for three days etc. including sand papering and making surfaces even and smooth dusting / cleaning, scaffolding, covering the furniture etc. with tarpoulines or equivalent covering materials, cleaning of all surfaces etc. & disposing of debris in side colony etc. complete as per specification and as directed by the Engineer in charge.

Repainting of old painted surfaces with two coats synthetic oil bound distemper of approved shade and make over one coat of approved cement primer, including thoroughly scrapping, removal of old paint if any, sand papering & preparing the surfaces, applying approved stucco putty to entire surface to fill up crevices mild depression etc. scaffolding including cleaning of floors, doors & windows etc.& disposing of debris in side colony etc. all as per specifications and as directed by the Engineer-in-Charge.

Painting two coats of synthetic enamel paint over a coat of primer to wood / steel surfaces of approved colour, shade and make to give an even shade over the existing old painted surfaces of doors, windows, wood works and steel work etc. after applying sand paper, cleaning the surfaces, filling the cracks, crevices etc. with approved oil putty including scaffolding, removal of paint splashings and droppings from floors, doors, windows and walls etc. complete all as directed by the Engineer-in-Charge.

a) On wood surfaces

b) On steel surfaces

Providing and fixing Universal water closet suit comprising : a)Universal water closet with 'P' or 'S' trap similar to Model- Slick of M/s Hindware (Cat No. 20012) make Sanitary ware in white glazed vitreous chinaware b) Solid plastic heavy quality seat with lid similar to M/s. Hindware or approved equivalent and including cost of removing the existing one & disposing of debris in side Anushaktinagar colony at the location identified by EIC etc complete all as per specification and as directed by the EIC.

Providing and fixing IWC closet suit comprising : a) Indian water closet with 'P' trap similar to Model- Slick of M/s Hindware or approved equivalent make Sanitary ware in white glazed vitreous chinaware and ncluding the cost of removing the existing damaged / broken and making good the surrounding with cement mortar / concrete tiles maching to the existing finish & disposing of debris inside colony etc complete all as per specification and as directed by the Engineer-in-Charge.

Description of Work / Item(s)

Amount

REBATED ITEM

Rebate for Taking away dismantled item by the contractor

a) Teak wood/Pvc pannel door shutter.

b) Teak wood/Pvc frame.

c) Pressed steel door frame.

d) CP Brass PH Items like bib tap, stop cock, etc.

e) GI/CI/MS pipe/Grill of various dia.

AMBIKA ENTERPRISE

AMBIKA ENTERPRISE

AMBIKA ENTERPRISE