Construction of Public Distribution shop for civil suppliers at Ramasamy Kovil Street Community Hall Dining room back side in ward no 63 Central Zone.

Amount

Earth work excavation in all soils with initial lead and lift etc complete as per direction of departmental officers

Plain cement concrete in 1:4:8 mix using 40mm HBG metal from approved quarry etc complete

Centering with stell plates including strutting lining and levelling etc complete

for plinth beams and footings sides

Columns

Beams

RCC 1:1.5:3 mix using 20mm HBG jelly from approved quarry

Supply and fabrication of RTS rods in various dia including cutting and bending etc

Fly ash brick work in CM 1:5 (one cement & five sand) usind size 9''x 4 3/8'' x 2 3/4'' including finishing curing etc complete complying with standard specification.

Refilling the excavated earth including watering and consolidation layer by layer with all incidental charges etc complete

Filling with well gravel including watering and consolidation layer by layer with all incidental charges etc complete

Supply and fixing of M.S. Door using all round 25x25x6 mm thick cross bracing 20x6mm M.S. Flats and M.S. shet 18g wtth necessary locking arrangements including one coat of red oxide paint (060x1.85m)

Plastering in cement mortar 1:3 mix 12mm thick

Plastering in cement mortar 1:5 mix 12mm thick

Plastering in cement mortar 1:3 mix 10mm thick

Painting with enamel paint two cots for doors windows,frills, welmesh etc

Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping removal of dust and including necessary plaster of paris putty works wherever required etc completed

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point /fan point ( for electronic regulator) SD-16.

Wiring with 2x1.5sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and c eiling with PVC accessories in flush with wall with 150mmx100mmx113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5Aflush type switch with continous earth wire connection of 14 SWG TC wire and making food of the concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2x4 sq.mm (56/0.3)PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mmx100mmx113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point.

Supply and fixing of box type 4.40w flourescent tube wiring complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC un sheathed copper leads from terminals to the fitting

Supply and fixing of 1200mm ac ceiling fan complete with elapsed electronics 300w regulator with 300mm down red on the existing clamp

Supply and erection of 2000 litre HDPE taank with water supply connection etc completed

Supply of WT bulk head fittings with guard suitable for 100W blub

Weathering course in concrete broken stone brick jelly 20mm size in pure slacked lime over RCC slab. The proporation being 32:12:5 for required slope and the thickness of roof as required and well beaten with wooden beaters etc completed

Terrace flooring with one course of pressed tiles of size 23x23 in cement mortar 1:3 mix with impermo oil 2% bu weight of cement and pointed with same oiled mortar